Spare parts for Fiem breeders: removable metal drawer

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.

ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG100/150 Incubator

Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts.

Original spare parts for Fiem incubators from Padovan Avicoltura : Single-pole switch. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.

When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.

Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam

💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.

Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.

⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).

Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for compatibility and replacements.

COMPACT FAN DIAM.250 ASP (MG300/316)

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

The FIEM Advanced Mini LED Control Unit is the perfect digital heart for those seeking precision, simplicity, and reliability in incubation. The self-calibrating digital sensor ensures accurate readings within ±0.1°C and ±1.5% RH, ensuring ideal conditions for hatching.

It is the ideal choice for hobbyists, small breeders, beekeepers and enthusiasts who want to improve their success rates without technical complications.

Why choose it?

• Ease of use even for beginners
• Reliable digital control
• Compatibility with mid-range FIEM incubators

What customers say: Users praise its intuitive operation, precise climate control, and solid construction. One customer writes: "I use it on an MG50: precise, quiet, and reliable." Reviews on forums and e-commerce sites confirm its high popularity among breeders.

FIEM COMO WAREHOUSE – Only original FIEM spare parts to ensure the long-term efficiency of your incubator.

Compatibility: CIP CIP 28/40, MG50, MG70, MG100, API Series

Includes: Complete control unit + T/H (temperature/humidity) probe 230V

👉 Perfect for those looking for a simple yet precise digital control unit, for effective and worry-free incubation.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.