Mesh lid 30x50 cm for hatching drawer in the incubation department of the Fiem MG244-316-432-576-720 incubator

Original Spare Parts for Fiem Incubators : 38x45 cm metal hatching tray for the hatching compartment on the Fiem MG 100/150 (old model) and Fiem MG 140/200 (old model) incubators. The plastic tray is not suitable for models released after 2020. If you want to add a hatching tray to the incubation compartment, use the 38x35 cm tray.

For the incubation department, take the 38x35 model (code 56) or for the post 2020 model the plastic boxes (code cass.plast.100)

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

Float Mod. C, horizontal inlet for Fiem incubator water tank

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Original Fiem spare parts from Padovan Avicoltura : Digital thermostat for Fiem Smart incubator + sensor.  Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Fiem Spare Parts : Incubation Basket for GOOSE measuring 38x35 cm.

Capacity approximately 9 goose eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to request information or clarification directly via WhatsApp? Click HERE (WHATSAPP).

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

The 200mm aluminum fan blade is an essential component for optimal ventilation inside Fiem MG70 incubators. Made of durable aluminum , it ensures uniform airflow, helping to maintain constant temperature and humidity for perfect incubation.

✔ Compatible with Fiem MG70 incubators
✔ 200mm diameter for even heat distribution
✔ Aluminum material for strength and durability
✔ Easy installation and maximum efficiency

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.

Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP

The 38x35 cm universal incubation basket is a versatile accessory, compatible with the Fiem MG70/100, MG100/150 and MG140/200 incubators. Thanks to its optimized structure, it can accommodate different types of eggs, adapting to their specific size. To lock the eggs in an upright position, we recommend purchasing the appropriate springs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ Approximate capacity: 35 chicken eggs, 40 pheasant eggs, 135 red partridge eggs, 150 partridge eggs, 150 quail eggs, 30 turkey eggs
✔ For goose eggs, purchase a dedicated drawer
✔ Durable structure, easy to clean and install

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Original Fiem spare parts : Plastic cover for hatching drawer Fiem MG244-316-300-320 incubator S316 hatching

To be combined with plastic hatching drawer (code CASS.56020001)

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

The door locking clips are an essential component for ensuring a perfect seal on the door of Fiem incubators . Designed to provide a secure and stable lock , they prevent heat and humidity loss, helping to maintain ideal incubation conditions.

✔ Compatible with various Fiem incubators
✔ Lever lock for stable and secure fastening
✔ Easy installation and long life
✔ Durable materials for long-lasting use

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

500W nickel-chrome heating element (Fiem original spare parts)