Cable Gland for Fiem Smart and Cosmo Power Cables
Cable Gland for Fiem Smart and Cosmo Power Cables
    Cable Gland for Fiem Smart and Cosmo Power Cables
    Cable Gland for Fiem Smart and Cosmo Power Cables

Cable Gland for Power Cable Fiem Smart and Cosmo

Reference: P67 - Brand: FIEM
€0.77
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

📋 Full Description - P67 Cable Protection Cable Gland

⚙️ Compatibility: Smart and CipCip (all models)
📍 Code: P67 | 💶 Price: €0.63 excluding VAT
🔒 Function: Power cord lock and protection
⚠️ Minimum order: €20 excluding VAT

🔍 When You Need This Replacement Part

Replace the cable gland when: it is cracked or broken, it no longer tightens the cable, hardened rubber does not seal, the cable moves freely, there are signs of overheating, it is missing after repairs, for preventative safety.

🔒 Critical Cable Protection

What it protects: Prevents sharp cable kinks, blocks moisture infiltration, prevents accidental tearing, eliminates chafing on edges, maintains electrical insulation. Without a strain relief: risk of short circuits, insulation deterioration, and electrocution!

📊 Technical Specifications

Code P67
Description GLAND for POWER CABLE
Material Durable rubber/plastic
Compatibility Smart and Cosmo
Price €0.63 excluding VAT

⚡ Installation

WARNING: Always unplug first! Loosen the ring nut of the old cable gland. Remove the cable. Insert the new cable gland into the hole. Pass the cable through. Tighten the ring nut until the cable is secure (it should not move, but it should not be crushed).

🛡️ Electrical Safety

The cable gland guarantees: IP protection against infiltration, mechanical strain relief, critical point isolation, and CE compliance. Mandatory component for safety!

❌ Mistakes to Avoid

  • Overtightening (damages cable)
  • Leave the cable free to move
  • Use without cable gland
  • Do not replace if hardened

🔗 For a minimum order of €20

Add: 17A Clip (€0.53) , SCHUCKO Cable (€2.84) , MEMB.TAST.DIG (€2.80) , CARTER MORS (€1.90) . For convenience, take 10-20 spare cable glands!

💬 Minimum order €20 Transparency

The minimum covers: sourcing small components in the warehouse, checking, packaging (even for small pieces), administrative management, and tracked shipping.

❓ FAQ

Is it really necessary?
Yes, it protects against short circuits and complies with CE safety regulations.

Universal for all cables?
Specific for standard FIEM cable diameter.

How much do I tighten the ring?
Until the cable is blocked without deforming it.

Is it worth taking a spare?
Yes, given the minimal expense and the importance of safety.

📱 Security Check
WhatsApp photo of cable entry point
We confirm status and compatibility

© 2025 Padovan Avicoltura. FIEM distributor. Certified safety. Prices exclude VAT, 24-month warranty for private individuals/12 VAT numbers.

P67

16 other products in the same category:

Cip Cip 28/40 MG50 COSMO Egg Turning Grid Insert
FIEM

Cip Cip 28/40 MG50 COSMO Egg Turning Grid Insert

€1.46
Availability: 233 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.

Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.

Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.

⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.

Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for compatibility and fitment.

Fiem Smart, Cosmo, Inca, Cip Cip, MG50 Egg Turning Gear Motor
FIEM

Egg Turning Gear Motor for Fiem Smart, Cosmo,...

€53.68
Availability: 194 In Stock

The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

SHT31 ML/LCD Humidity Sensor for Fiem Incubators
FIEM

SHT31 Humidity Sensor with Electronic Board and...

€51.85
Availability: 5 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586

📌 Scroll below for a complete technical guide, compatibility, and calibration.

Fiem Victoria Professional Goose Egg Poacher 28 Eggs
FIEM

Fiem Victoria Professional Goose Egg Holder for...

€19.70
Availability: 101 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Professional Goose Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Plato Professional Egg Holder 72 Fiem Victoria Professional Eggs
FIEM

Plato Porta 67 Galina Eggs (suitable for larger...

€19.70
Availability: 99 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Plato Porta Professionale 126 Eggs Red Partridge Professional Fiem Victoria
FIEM

Plato carries 126 Fiem Victoria Professional...

€19.70
Availability: 101 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Professional Red Partridge Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Upper ABS Shell for Fiem Cosmo Incubator
FIEM

Upper ABS Shell for Fiem Cosmo Incubator

€63.90
Availability: 103 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Noisy COSMO fan? Original FIEM Q12 Fan Protection Net
FIEM

Fiem Cosmo Incubator Fan Protection Net

€29.60
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.

Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.

Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.

⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.

Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Original Fiem spare parts: 350 W armoured heating element (MG540-432-576).
FIEM

350 W armored heating element (MG540-432-576)...

€44.00
Availability: 103 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : 350W Armored Heating Element (MG540-432-576). We rely exclusively on original spare parts from the manufacturers of each product, ensuring you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and safety risks.

UB-1500 Plastic Bushing for Fiem Ultrasonic Humidifier Inlet Tube - Original Fiem Spare Parts
FIEM

UB-1500 Plastic Bushing for Fiem Ultrasonic...

€1.02
Availability: 988 In Stock
FIEM UB-1500 Plastic Bushing for Humidity System Pipe Inlet – A safe passage for the water pipe. This plastic bushing fits into the incubator's hole, allowing the humidity system pipe to pass from the outside to the inside, protecting the pipe from wear and ensuring a proper seal.

When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Q10 NET SHELF WITH STAINLESS STEEL FRAME FOR G316 SPROUTER
FIEM

Q10 NET SHELF WITH STAINLESS STEEL FRAME FOR...

€40.30
Availability: 103 In Stock

Discover the Q10 mesh shelf with stainless steel frame for the G316 germinator: resistant, practical and perfect for growing sprouts optimally.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

5 lt water tank for Fiem semi-automatic humidity kit for CipCip40-MG50-MG70-MG100-MG140-MG200-MG320
FIEM

5 lt water tank for Fiem semi-automatic...

€10.25
Availability: 995 In Stock
5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.