Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Stainless steel splash guard cover 14x9 cm for F02 tray
500W nickel-chrome heating element (Fiem original spare parts)
The 2.00 m / 143W 170 OHM/MT silicone heating cable is an essential component for the correct functioning of the Fiem MG50, MG70, MG100, MG140, MG320 incubators. This heating element ensures uniform heat distribution, ensuring a stable incubation environment for optimal embryo development.
✔ Compatible with Fiem MG50, MG70, MG100, MG140, MG320 incubators
✔ Length 2 meters, power 143W, resistance 170 OHM/MT
✔ Even heating for a constant temperature
✔ Silicone construction for high strength and durability
By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :
🔄 The complete 117/E gearmotor is not just a motor: it is the ready-to-use kit with cams, joint and screws, all FIEM calibrated for immediate installation and perfect voltage!
At €45.58 excluding VAT , the 117/E gearmotor specifically for Smart includes everything you need: motor, transmission cams, connecting joint, and fixing screws. You don't have to search for compatible parts or worry about whether the joint is right—everything is included and pre-assembled to work perfectly together.
⚙️ The difference from the basic 117/F, which costs €44 excluding VAT? This includes the cams and joint already installed, calibrated for the precise 30-minute forward and 30-minute backward movement that replicates a brooding hen. As the FIEM manual indicates, this constant movement is vital to prevent the embryo from adhering to the shell. For €1.58, you'll have the peace of mind of a completely new replacement.
⚠️ When should you replace it? If the voltage is no longer working, if you hear gear noises, if the movement is irregular, if the cams or joints are worn, or if you're completely overhauling the system after years of use.
💡 The advantage of the complete kit: no doubts about part compatibility, faster installation, everything pre-assembled and FIEM tested. Ideal for those who want guaranteed operation!
✅ Specific for Smart model as indicated in the description.
📱 Want to upgrade your entire voltage system? Contact us on WhatsApp
🚚 Shipping from Como in 1 day. FIEM since 1975 , complete kits for total peace of mind. 24-month warranty for private individuals, 12 VAT numbers.
When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.
💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).
Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
The heating cable resistance bracket/collar is an essential component for the proper functioning of the Fiem Cip Cip 28 and Cip Cip 40 incubators. This bracket securely holds the heating element, ensuring even heat distribution throughout the machine for optimal incubation. Made of high-quality, heat-resistant materials, it ensures long life and reliable performance.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
(part 16a)
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.
Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.
Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.
⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.
Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
Original spare parts for Fiem incubators from Padovan Avicoltura : Kit with 3 20 mm membranes + key for ultrasonic membrane humidifier . Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Ultrasonic humidifier with a single membrane and power supply. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed.
ULTRASONIC HUMIDIFIER 1 MEMBRANE + POWER SUPPLY MG432-576-720-400H
🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!
At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.
⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.
⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.
💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!
✅ Compatible with Smart and Cosmo , standard for power cable passage.
📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.
🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.
The single egg turning bar for the Fiem MG70/100 incubator is a fundamental component for ensuring the correct movement of eggs during incubation. Designed to be compatible with the Fiem MG70 and MG100 models, it ensures smooth and uniform rotation , preventing the risk of the embryo adhering to the shell.
✔ Compatible with Fiem MG70 and MG100 incubators
✔ Ensures uniform rotation for optimal hatching
✔ Strong and durable materials
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
🔝 The clear lid isn't just a window onto your eggs: it's the thermal barrier that keeps temperature and humidity stable, determining the success of your hatchings!
At €30.50 (excluding VAT) , the Smart Lid (part #14 in the exploded view) is much more than just a clear plastic cover. It's designed to create the perfect climate chamber that maintains a constant 37.7°C and the necessary humidity, while allowing you to observe development without constantly opening the lid.
🌡️ The transparency of the material is no accident: it allows you to visually check the thermometer and eggs without losing heat. Any unnecessary opening can cause fluctuations of 2-3°C, which slows embryonic development, which is why an intact and well-sealed lid is essential.
⚠️ When should you replace it? If it has cracks or breaks, even small ones, that cause heat and moisture leaks. If the plastic is cloudy from years of use and you can't see clearly inside. If it no longer seals tightly, leaving gaps. If it has been deformed by excessive heat or impacts.
🔧 As the manual indicates, during the last two days of hatching, the lid must be kept tightly closed to maintain humidity at 62%. It's tempting to open the lid to watch the chicks hatch, but each opening compromises subsequent hatchings!
✅ Compatible exclusively with the Smart model . The specific design with the correct curvature ensures optimal air circulation studied by FIEM.
📱 Not sure about the condition of your lid? Send us photos of the complete incubator and lid from various angles on WhatsApp .
🚚 Protected shipping from Como in 1 business day. Reinforced packaging to prevent breakage. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.
Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.
Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.
📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.
⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).
Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como
Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT excl.)
Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.
📌 Scroll below for a complete guide, compatibility, and installation.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Humidity tray (Inca - MG50 - MG70 - Maya - MG100 - MG140) diameter mm 20X4h Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Italiano
Deutsch
Español
Français
