FIEM THERMOSTAT PROBE EASY-INCA-CIP28-CIP40-MAYA
    FIEM THERMOSTAT PROBE EASY-INCA-CIP28-CIP40-MAYA

FIEM THERMOSTAT PROBE ELTP2B-P EASY-INCA-CIP28-CIP40-MAYA

Reference: SONDA ELTP2B-P - Brand: FIEM
€14.60
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

ELTP2B-P thermostat probe: precise temperature measurement for optimal incubation control.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

SONDA ELTP2B-P

16 other products in the same category:

Power Cable for Automatic Humidification of Fiem Incubators
FIEM

Power Cable for Automatic Humidification of...

€14.23
Availability: 1000 In Stock

🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

Adjustable egg turning grid for Fiem Cosmo incubators
FIEM

Adjustable egg turning grid for Fiem Cosmo...

€70.64
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔄 The automatic hand that imitates a hen.
This grid is the heart of the turning system: it houses the inserts that separate the eggs into neat rows and, connected to the gearmotor, makes them roll gently back and forth, just like a hen in her nest.

Quick diagnosis: eggs that do not rotate, bent or deformed grid, inserts that do not stay in place, jerky or incomplete movement.

Solution: Original FIEM Adjustable Insert Egg Turning Grid, specifically for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Brescia with a COSMO EVO had the original grid warped after 6 years of intensive use. The eggs no longer rolled evenly, and hatching rates had dropped. He replaced the grid in 10 minutes, and the next cycle brought the hatching rate back to 85%.

⚠️ When to replace it: If you notice warping, cracks, or the inserts no longer staying in place, it's time to replace it. A damaged grid compromises the voltage and drastically reduces hatching rates.

Essential data:
💶 Price: €52.50 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: 1/3/5
📋 Exploded view ref.: n. 1
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Probe for dig1 digital thermostat (Fiem spare parts)
FIEM

Probe for dig1 digital thermostat (Fiem spare...

€15.90
Availability: 102 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital thermostat probe. Only at Padovan Avicoltura will you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and after-sales consulting service, and user assistance to help you get the most out of your incubator.

200mm Aluminum Fan Blade for Fiem MG70
FIEM

200mm Aluminum Fan Blade for Fiem MG70...

€5.12
Availability: 200 In Stock

The 200mm aluminum fan blade is an essential component for optimal ventilation inside Fiem MG70 incubators. Made of durable aluminum , it ensures uniform airflow, helping to maintain constant temperature and humidity for perfect incubation.

✔ Compatible with Fiem MG70 incubators
✔ 200mm diameter for even heat distribution
✔ Aluminum material for strength and durability
✔ Easy installation and maximum efficiency

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

ELECTROMECHANICAL THERMOMETER WITH FULL ALARM
FIEM

ELECTROMECHANICAL THERMOMETER WITH FULL ALARM

€94.20
Availability: 103 In Stock

COMPLETE ELECTROMECHANICAL ALARM THERMOMETER: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Cable Gland for Fiem Smart and Cosmo Power Cables
FIEM

Cable Gland for Power Cable Fiem Smart and Cosmo

€0.77
Availability: 1000 In Stock

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

Plato Professional Egg Holder 72 Fiem Victoria Professional Eggs
FIEM

Plato Porta 67 Galina Eggs (suitable for larger...

€19.70
Availability: 99 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Transparent Door Porthole + Fiem Grey Support
FIEM

Transparent Door Porthole with Gray Support for...

€5.89
Availability: 194 In Stock

The transparent door window with gray support is an essential spare part for Fiem incubators, designed to ensure optimal visibility inside the machine without compromising its thermal insulation . The gray support ensures stable attachment, while the transparent material allows you to easily monitor the incubation process.

✔ Compatible with Fiem incubators
✔ Transparent material for immediate incubation control
✔ Sturdy grey stand for stable fixing
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and optimal performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Fiem Hatching Tray cm 38x45 MG 100/150 MG 140/200
FIEM

Hatching Tray for Fiem MG50

€34.00
Availability: 97 In Stock

Original Spare Parts for Fiem Incubator : MG50 Useful for those who want to avoid dirtying the incubation drawer supplied with the machine.

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

Lid for Fiem MG and Astrale series humidity trays
FIEM

Lid for Fiem MG and Astrale series humidity trays

€3.17
Availability: 193 In Stock

The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
🔧 Original Fiem steel spare part 14x9 cm
✅ Compatible with MG and Astrale
🛠️ Useful in high humidity conditions

Fiem Thermometer/Hygrometer Plastic Case
FIEM

Plastic Case for Thermometer/Hygrometer -...

€16.14
Availability: 189 In Stock

The Fiem plastic case for thermometers/hygrometers is an essential accessory for protecting temperature and humidity sensors from impacts, dust, and external humidity. Designed to ensure maximum safety for measuring devices, this case is made of resistant and durable material , perfect for prolonged use in incubators.

✔ Compatible with Fiem thermometers and hygrometers
✔ Effective protection against impacts and external agents
✔ Durable plastic material for long life
✔ Easy installation and removal

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :