Plastic Case for Thermometer/Hygrometer - Durable and Safe Protection - Original Fiem Spare Parts

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for a complete technical guide, compatibility, and calibration.

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

ELTP2B-P thermostat probe: precise temperature measurement for optimal incubation control.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Upgrade available only for those who purchase a new FIEM incubator and wish to replace the supplied thermohygrometer with a higher quality one . The FIEM Easy-Read Thermo - Hygrometer ( 60–95 ° F ) , Made in Germany , is designed to offer precise dual measurement of temperature and humidity with a simplified , easily readable dial . Ideal for those who want immediate and more intuitive visual control throughout the incubation phase .

Why make this upgrade?
✅ Clearer and more intuitive reading
✅ Dual function: temperature + humidity
✅ Optimized scale for incubation
✅ Professional product Made in Germany
✅ Compatible with all FIEM incubators​

🟢 Chosen by those who want maximum control in a simple and effective glance .

Water dispenser for Fiem hygrometer

Upgrade available only for those who purchase a new FIEM incubator and wish to replace the supplied thermometer with a higher quality one . The FIEM Easy- Read Precision Thermometer ( 85–110 ° F ) , Made in Germany, offers a clearer and more immediate reading , perfect for quick and accurate checks . It maintains the accuracy of the standard model but with a more legible dial and a scale focused on incubation temperatures .

Why make this upgrade?
✅ Simplified and immediate reading
✅ Optimized scale for incubation
✅ Reliability and German quality
✅ Compatible with all FIEM incubators​

🟢 Highly appreciated by those looking for maximum control in a simple and fast way

Original Fiem spare parts from Padovan Avicoltura : L-shaped prismatic thermometer - 100°F for Fiem and Victoria incubators

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

🌡️ Fiem Check-Up – The definitive guide to calibration and precise control

Do you really want to maximize the performance of your incubator?
With the Guide to Control and Calibration with the Fiem Check-Up Precision Digital Thermometer , you will have in your hands one of the most powerful tools for obtaining reliable and consistent results .

📏 Why is it essential?
Because every degree counts. Correct calibration is what makes the difference between a successful hatch and a failed cycle. With this guide, you'll learn step-by-step how to check and correct any temperature deviations , thus consistently achieving an ideal environment for embryonic development.

✅ Perfect for:

✔️ Professional breeders and demanding hobbyists

✔️ Those who want maximum precision and control

✔️ Those who use FIEM incubators and want to get the best out of every cycle

📘 Inside you will find:

✔️ The fundamental principles of thermal calibration

✔️ Detailed instructions for using the Check-Up Fiem digital thermometer

✔️ Practical tips for professional temperature control

🎁 How to receive it?
Free upon request with the purchase of a FIEM incubator or Check-Up thermometer
Offer valid for orders made by bank transfer, cash on delivery, Postapay top-up, or Satispay .
Free license , reserved for Padovan Avicoltura customers. (Subject to acceptance of confidentiality requirements)

💡 The secret to successful incubation? It's measuring, calibrating, and perfecting . With this guide, nothing will be left to chance.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Fiem temperature probe for ELTP1 thermostat: precise temperature measurement for successful incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.