FIEM Cosmo Incubator Door Hinge

FIEM square net mat for breeder (pheasant-partridge) dimensions 50x100 cm, 5x5 mm mesh.

Original Fiem spare parts: square mesh mat, 50x100 cm, 5x5 mm mesh, perfect for raising pheasants and partridges. Guarantees maximum strength and durability.

Please carefully check that the required part matches the image provided. If you have any questions or are having trouble finding the part you need, please send us a photo of the part you need via WhatsApp. Thank you.

The site allows everyone to make online purchases. For those who wish to purchase offline by submitting their information, we will make the online purchase for you at a small surcharge.

Simple and effective humidity control with the FIEM Humidity Kit

This complete kit is the ideal solution for those looking to automate humidity management within their FIEM incubator. Consisting of a tank with a plexiglass lid and float, an ultrasonic nebulizer with a membrane, an external tank, and a connecting tube, it ensures uniform and constant distribution of water vapor, improving environmental conditions for optimal hatching.

Perfect for small breeders, hobbyists, and professionals, this accessory is compatible with numerous FIEM models (except the MG50 CIP CIP 28-40 EI PLASTIC MODELS) equipped with a control unit set up for automatic humidity control. Installation is quick and easy, with no complex technical intervention required.

Positive reviews on the web: Appreciated for its ease of use, reliability in maintaining humidity parameters, and compatibility with many FIEM incubators.

Criticisms found on the web: Some users recommend checking the membrane periodically to ensure maximum efficiency.

Fiem AIR CONDITIONED AA -68/24 Exotic Spare Parts and Options for MG50

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital Thermostat 1 + Probe (Fiem Spare Parts) . Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to keep your incubator always in working order, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

The FIEM Mini LED control unit is an advanced incubator control system, designed to ensure precise temperature and humidity management. Equipped with a large seven-segment display, it offers clear and immediate readings. Thanks to the connection to the FIEM Limpia automatic humidifier, it allows direct humidity control.

Main features:

• ✔ Bright display with decimal units for accurate reading
• ✔ Humidity display and adjustment with humidifier connection
• ✔ °C/°F conversion to suit different needs
• ✔ PID/ON-OFF temperature control mode
• ✔ Digital sensor calibration for optimal accuracy
• ✔ Dual temperature and humidity sensor for greater reliability

⚠️ OLD VERSION: This is the previous version of the MiniLED control unit. For newer incubators, the MiniLED Advanced (NEW) is available with a green LED display and improved features.

💰 Price: €110.30 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO – Padovan Avicoltura: only original FIEM components for reliable and long-lasting performance of your incubator.

Compatibility: CIP CIP, MG50, MG70, MG100, API Series (check specific model)

Includes: Complete control unit with double temperature and humidity sensor

By purchasing this product, you choose original FIEM spare parts, guaranteeing high performance for your incubator.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Original Fiem Spare Parts : Metal drawer for 38x50 cm hatching; suitable for the incubation and hatching department of the Fiem MG incubator, for the incubation department of the Fiem MG200/300 incubator.

See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

The 30x40 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.

Minimum 20 pieces.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.