PLASTIC FLOOR - FIEM SMART INCUBATOR
    PLASTIC FLOOR - FIEM SMART INCUBATOR

PLASTIC FLOOR - FIEM SMART INCUBATOR

Reference: RETE SMART - Brand: FIEM
€7.00
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

PLASTIC FLOOR - FIEM SMART INCUBATOR

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

RETE SMART

16 other products in the same category:

Fiem Spare Parts for Incubation and Hatching Tray with MG50 Egg Turning Kit
FIEM

Incubation and Hatching Tray with Egg Turning...

€120.00
Availability: 103 In Stock

Original Fiem Spare Parts : Incubation and hatching drawer for Fiem MG50 incubator complete with egg turning kit.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Fiem CIP 40 Metal Support for Humidity Channel
FIEM

Fiem CIP 40 Metal Support for Humidity Channel

€6.71
Availability: 999 In Stock
CIP 40 Humidity Channel Metal Support – The bracket that holds the water channel in place. This metal support ensures stability and proper positioning of the humidity tray on the bottom of the incubator.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts Protective Net for Cip Cip 28 Fan
FIEM

Cip Cip 28 Fan Protection Net

€6.80
Availability: 200 In Stock

The protective net for the Fiem Cip Cip 28 incubator fan is a crucial accessory for ensuring safety and optimal performance. Designed to protect the fan from dust, feathers, and debris , it prevents possible obstructions that could compromise proper air circulation. Made of resistant and durable material , it ensures a constant flow of air, improving the uniform distribution of temperature and humidity within the incubator. Its simple installation keeps the fan efficient for longer , reducing wear and maintenance. Buy now at Padovan Avicoltura and ensure maximum performance for your incubator! (PART.N-2)

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions, please contact us via WhatsApp:

  • A photo of the necessary spare part
  • A photo of the incubator
  • A photo of the label on the back of the incubator

SHT31 ML/LCD Humidity Sensor for Fiem Incubators
FIEM

SHT31 Humidity Sensor with Electronic Board and...

€51.85
Availability: 5 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586

📌 Scroll below for a complete technical guide, compatibility, and calibration.

2.06m - 95W Silicone Heating Cable for Fiem Cip Cip 28 and 40 Incubators
FIEM

2.06m - 95W Silicone Heating Cable for Fiem Cip...

€14.86
Availability: 193 In Stock
R75E Silicone Heating Element for CIP CIP 28 / CIP CIP 40 – The thermal heart of your incubator. This 2.06 meter silicone heating cable ensures even heat distribution throughout the incubation chamber, maintaining a stable temperature essential for embryonic development.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Fiem Smart 130-B Gear Motor Cover | Egg Turner Protection
FIEM

Fiem Smart Gearmotor Protection Cover / Plastic...

€6.54
Availability: 1000 In Stock

🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!

At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.

🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.

⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.

💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!

✅ Specific for Smart , designed to perfectly close the gearmotor compartment.

📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Cosmo Incubator Lower Body Inner Caps
FIEM

Fiem Cosmo Incubator Lower Body Inner Caps

€0.90
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔌 The caps that close the internal holes and maintain insulation.
COSMO internal plugs are small plastic inserts that seal the fixing holes and openings in the bottom shell. They prevent heat and humidity loss, maintaining a stable incubation environment.

Quick diagnosis: missing, broken, or loose caps, open holes in the body, cold air drafts from below.

Solution: Original FIEM internal caps for the lower body of COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer from Rovigo noticed unstable temperatures in his COSMO EVO. After checking the control unit and heating element, he discovered that two caps on the bottom were missing. He replaced them and the problem was immediately solved.

⚠️ When to replace them: If the caps are missing or broken, cold air enters from the bottom and hot air escapes. These may seem like small details, but they make a difference in thermal stability.

Essential data:
💶 Price: €0.74 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: CAPS
📋 Exploded view ref.: n. 11
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

Original Fiem Spare Parts: Easy silicone heating element, 1.20 m
FIEM

RESIST. (EASY) SILICONE 1.20 mt 330 OHM / MT...

€12.00
Availability: 103 In Stock

Original spare parts for Fiem incubators from Padovan Avicoltura : Easy silicone heating element, 1.20 m. Being able to count on a spare parts supply service is essential and makes the difference, adding value to the service provided by PadovanAvicoltura.

RESIST. (EASY) SILICONE 1.20 m 330 OHM / MT