AXIAL FAN MOTOR A3G630AC5258 (MG 2500) Fiem
AXIAL FAN MOTOR A3G630AC5258 (MG 2500) Fiem
    AXIAL FAN MOTOR A3G630AC5258 (MG 2500) Fiem
    AXIAL FAN MOTOR A3G630AC5258 (MG 2500) Fiem

AXIAL FAN MOTOR A3G630AC5258 (MG 2500) Fiem

Reference: MOTOV.MG2500 - Brand: FIEM
€589.00
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Original Fiem spare parts for the Axial Fan Motor A3G630AC5258 (MG 2500)

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

MOTOV.MG2500

16 other products in the same category:

Fiem Cosmo Incubator Mesh Flooring: Keep Your Eggs Safe
FIEM

COSMO Base Network - Expanded Mesh Flooring

€20.24
Availability: 999 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The floor that lets the eggs breathe from below.
The COSMO base mesh is the perforated surface on which the eggs rest. It allows warm air and humidity to rise from the trays below, ensuring even distribution throughout the incubation chamber.

Quick diagnosis: rusty netting, broken or loosened meshes, bent or deformed netting, eggs that do not sit securely.

Solution: Original FIEM expanded mesh base for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Rovigo with a COSMO EVO had a rusty base net after 7 years. The eggs were no longer stable, and some had broken during the hatching process. The net was replaced, no broken eggs, and hatching was normal again.

⚠️ When to replace it: If the mesh is rusty, warped, or has broken links, the eggs will no longer sit securely and may be damaged during turning. It's best to replace it immediately.

Essential data:
💶 Price: €16.59 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: BASE NETWORK COS
📋 Exploded view ref.: n. 8
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Fiem 30x40 cm Embossed Paper Mat for Hatching Tray
FIEM

Fiem 30x40 cm Embossed Paper Mat for Hatching...

€0.43
Availability: 910 In Stock

The 30x40 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.

Minimum 20 pieces.

Plato Porta Professionale 126 Eggs Red Partridge Professional Fiem Victoria
FIEM

Plato carries 126 Fiem Victoria Professional...

€19.70
Availability: 101 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Professional Red Partridge Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Fiem Smart Transparent Lid (Exploded View 14)

Fiem Smart Transparent Lid (Exploded View 14)

€37.20
Availability: 999 In Stock

🔝 The clear lid isn't just a window onto your eggs: it's the thermal barrier that keeps temperature and humidity stable, determining the success of your hatchings!

At €30.50 (excluding VAT) , the Smart Lid (part #14 in the exploded view) is much more than just a clear plastic cover. It's designed to create the perfect climate chamber that maintains a constant 37.7°C and the necessary humidity, while allowing you to observe development without constantly opening the lid.

🌡️ The transparency of the material is no accident: it allows you to visually check the thermometer and eggs without losing heat. Any unnecessary opening can cause fluctuations of 2-3°C, which slows embryonic development, which is why an intact and well-sealed lid is essential.

⚠️ When should you replace it? If it has cracks or breaks, even small ones, that cause heat and moisture leaks. If the plastic is cloudy from years of use and you can't see clearly inside. If it no longer seals tightly, leaving gaps. If it has been deformed by excessive heat or impacts.

🔧 As the manual indicates, during the last two days of hatching, the lid must be kept tightly closed to maintain humidity at 62%. It's tempting to open the lid to watch the chicks hatch, but each opening compromises subsequent hatchings!

✅ Compatible exclusively with the Smart model . The specific design with the correct curvature ensures optimal air circulation studied by FIEM.

📱 Not sure about the condition of your lid? Send us photos of the complete incubator and lid from various angles on WhatsApp .

🚚 Protected shipping from Como in 1 business day. Reinforced packaging to prevent breakage. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Smart Display Cover Front Panel

Fiem Smart Display Cover Front (Exploded view...

€9.20
Availability: 1000 In Stock

🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

CIP 28 Metal Support for Humidity Trays
FIEM

CIP 28 Metal Support for Humidity Trays

€5.49
Availability: 1000 In Stock
CIP 28 Metal Humidity Tray Support – The bracket that holds the 2 water trays in place. This metal support ensures stability and proper positioning of the humidity trays inside the incubator.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Wet Bulb Hygrometer / Incubation Hygrometer
FIEM

Wet Bulb Hygrometer / Incubation Hygrometer

€24.50
Availability: 994 In Stock
Portable Wet Bulb Hygrometer / Incubation Hygrometer – Precision analog instrument for measuring relative humidity in incubators. Based on the psychrometric method, considered one of the most accurate.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

4-Sector Tray Base for Fiem Smart Incubator

4-Sector Tray Base for Fiem Smart Incubator

€25.00
Availability: 1000 In Stock

💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!

At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.

🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!

📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.

⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.

✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.

📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.

🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.

COSMO incubator not closing properly? FIEM GACOS hook
FIEM

Hook + Threaded Insert for Anchoring Lower to...

€3.46
Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔗 The lock that holds the entire incubator together.
The GACOS is the hook with a threaded insert that connects the lower shell to the upper shell. If it breaks or loosens, the two shells will no longer seal properly, and you lose heat and moisture.

Quick diagnosis: shells that do not engage, broken or bent hook, stripped threaded insert, closure that does not hold.

Solution: Original FIEM GACOS for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Treviso with a COSMO EVO had a car that wouldn't close properly and was losing heat. He thought it was an electrical problem, but it was just a broken GACOS. It was replaced in 2 minutes, and the problem was solved for less than 3 euros.

⚠️ When to replace: If the two shells no longer fit securely or you notice any play between the parts, check the GACOS immediately. An imperfect seal disperses heat and moisture.

Essential data:
💶 Price: €2.84 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: GACOS
📋 Exploded view ref.: n. 6
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

Is your COSMO door dull or scratched? Can't see the eggs anymore? Get an original FIEM replacement part.
FIEM

Fiem Cosmo Incubator Plastic Door

€24.22
Availability: 199 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

👁️ The window that lets you see everything without opening it.
The COSMO transparent door lets you check your eggs, temperature, and humidity at a glance, without opening the machine and losing heat. If it's opaque, scratched, or cracked, you lose visibility and airtightness.

Quick diagnosis: dull or yellowed door, deep scratches that obscure vision, cracks or breaks, door that doesn't close properly.

Solution: Original FIEM Transparent Door for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Mantua with a COSMO ML had a door so opaque from using harsh detergents that he couldn't see the eggs. To check on the hatching, he had to open it every time, losing heat. After replacing the door, he was able to monitor everything again without touching the machine.

⚠️ When to replace it: If the door is cloudy, yellowed, scratched, or cracked, it's time to replace it. A damaged door forces you to open the car to check, dispersing heat and humidity.

Essential data:
💶 Price: €19.85 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: COSMO DOOR
📋 Exploded view ref.: n. 7
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Metal Protection for Electrical Terminals for Fiem Smart
FIEM

Metal Protection for Electrical Terminals for...

€2.30
Availability: 1000 In Stock

🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!

At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.

⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.

🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.

⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.

✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.

📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.

🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.