EGG TURNER TIMER (MG432-576-720)
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Ultrasonic humidifier water filter
PLASTIC FLOOR - FIEM SMART INCUBATOR
A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."
⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.
When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.
What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.
Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.
💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.
Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.
💡 More info? Read the description below.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔗 The lock that holds the entire incubator together.
The GACOS is the hook with a threaded insert that connects the lower shell to the upper shell. If it breaks or loosens, the two shells will no longer seal properly, and you lose heat and moisture.
Quick diagnosis: shells that do not engage, broken or bent hook, stripped threaded insert, closure that does not hold.
Solution: Original FIEM GACOS for COSMO, COSMO EVO, and COSMO ML incubators. Price each.
📌 Real case: A customer in Treviso with a COSMO EVO had a car that wouldn't close properly and was losing heat. He thought it was an electrical problem, but it was just a broken GACOS. It was replaced in 2 minutes, and the problem was solved for less than 3 euros.
⚠️ When to replace: If the two shells no longer fit securely or you notice any play between the parts, check the GACOS immediately. An imperfect seal disperses heat and moisture.
Essential data:
💶 Price: €2.84 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: GACOS
📋 Exploded view ref.: n. 6
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
Original Spare Parts for Fiem Incubators : 30x40cm plastic hatching tray suitable for Fiem MG 100/150 Incubator, Fiem MG140/200 Incubator, MG 200/300 (S) . For example use, see second photo. Mesh lid available for purchase separately.
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
see also art. cod. 38 and cod. 56
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.
Original spare parts for Fiem incubators from Padovan Avicoltura : Kit with 3 20 mm membranes + key for ultrasonic membrane humidifier . Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.
Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP
ELECTRONIC FAN MOTOR D.300mm 230V 50-60HZ (G-576)
🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!
At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.
⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.
⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.
💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!
✅ Compatible with Smart and Cosmo , standard for power cable passage.
📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.
🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.
Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Spare Parts and Exotic Options Fiem Incubation Tray Complete with cylindrical inserts mg50 and Colibri
The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
Do you really want to maximize the performance of your incubator?
With the Guide to Control and Calibration with the Fiem Check-Up Precision Digital Thermometer , you will have in your hands one of the most powerful tools for obtaining reliable and consistent results .
📏 Why is it essential?
Because every degree counts. Correct calibration is what makes the difference between a successful hatch and a failed cycle. With this guide, you'll learn step-by-step how to check and correct any temperature deviations , thus consistently achieving an ideal environment for embryonic development.
✅ Perfect for:
✔️ Professional breeders and demanding hobbyists
✔️ Those who want maximum precision and control
✔️ Those who use FIEM incubators and want to get the best out of every cycle
📘 Inside you will find:
✔️ The fundamental principles of thermal calibration
✔️ Detailed instructions for using the Check-Up Fiem digital thermometer
✔️ Practical tips for professional temperature control
🎁 How to receive it?
Free upon request with the purchase of a FIEM incubator or Check-Up thermometer
Offer valid for orders made by bank transfer, cash on delivery, Postapay top-up, or Satispay .
Free license , reserved for Padovan Avicoltura customers. (Subject to acceptance of confidentiality requirements)
💡 The secret to successful incubation? It's measuring, calibrating, and perfecting . With this guide, nothing will be left to chance.
⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!
At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.
🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!
⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.
💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.
✅ Compatible with all Smart and CipCip models with standard European 230V power supply.
📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.
🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.
Italiano
Deutsch
Español
Français
