New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
New humidification system with immersion cartridge heater: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity control with heating element. The system uses a constant-level water flow tray equipped with an external tank (see attached photos).
The kit includes an IEC socket, power cables, and fastons. This work must be performed by a qualified electrician.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane
Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.
Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.
Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks
⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.
Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como
Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586
📌 Scroll below for technical guidance, compatibility chart, and assembly.
RESIST. DOUBLE IN SILICONE 2.00 m/286W (MG200-244-316-WOOD)-170 OHM/MT
The rubber air inlet ring is a component designed to ensure optimal airflow regulation in Fiem incubators. This replacement part ensures a perfect fit, preventing leaks and ensuring a stable environment for proper egg incubation. Made of resistant and durable rubber , it ensures long life and easy installation.
By purchasing this product, you choose original Fiem spare parts , compatible with your incubator to maintain high performance and reliability.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
The egg retaining springs for Fiem MG series incubators are original spare parts designed to ensure the correct positioning of eggs in the egg holders, especially when a row is incomplete. If all the eggs are missing from a row, there's a risk that the eggs will tilt or tip over during automatic rotation. The springs solve this problem by firmly locking the eggs into the empty compartments, keeping them upright and stable throughout the incubation period.
Compatible with all Fiem MG series incubators (MG 50, MG 70, MG 100, MG 140, MG 200 and above), these springs are made of strong and durable spring steel , designed to fit perfectly into the supplied tilting baskets. They are easy to install without tools, improve incubation safety, and ensure a higher hatching rate, even when the machine is partially used.
Rely on original Fiem spare parts , available from Padovan Avicoltura , to maintain high quality standards and protect your eggs at every stage.
Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm
🥚 The 32/A egg turning grid is not a simple divider: it is the system that gently rolls the eggs, replicating the natural movement of the hen!
At €9.98 (excluding VAT) , this grid (part no. 8 in the exploded view) neatly divides the rows of eggs and, connected to the tensioning system, rolls them with precision. Just like a mother hen turns each egg with her beak several times a day, this grid, moving back and forth for 30 minutes, gently rolls each egg, preventing the embryo from sticking to the shell.
🔄 Movement is vital: without regular rotation, the embryo adheres to the internal membrane and dies. As specified in the FIEM manual, the gearmotor moves the grid in hourly cycles (30 minutes forward, 30 minutes backward), causing the eggs to roll on their axis. It's this constant action that increases hatching rates from 20% without voltage to 80-90% with the correct voltage!
⚠️ When should you replace it? If the dividers are bent and the eggs don't roll evenly, if it no longer engages the gearmotor pin, if it has breaks that block some eggs, or if wear and tear after many cycles compromises the smooth movement.
💡 The dividers are not random: they keep the eggs at the right distance to roll without bumping into each other, organize the space for maximum capacity, and ensure that each egg receives the necessary movement.
✅ Compatible with Smart only , designed for Smart automatic or manual voltage system.
📱 Eggs not rolling properly? Send a WhatsApp video of the movement for immediate diagnosis.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , natural movement for excellent results. 24-month warranty for private individuals, 12 VAT numbers.
A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."
When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.
How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.
Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
💡 More info? Read the description below.
Constant and professional humidity control with the FIEM Limpia 4-liter humidifier
Designed to optimize humidity management during incubation, the FIEM Limpia ultrasonic humidifier is the ideal choice for those seeking precision, silence, and automation. Thanks to its nebulization system, it ensures a uniform supply of cold steam within the incubator chamber, improving the embryonic development environment and hatching rates.
Perfect for integration with FIEM incubators equipped with a digital control unit for automatic humidity regulation. The 4-liter tank ensures autonomy and operational continuity.
Positive reviews online : Reliable, precise, compact, and quiet. Also appreciated for its easy connection to the compatible Evo Plus and Mini LED Advanced models.
Criticisms found on the web: Some users recommend using only distilled water
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
👁️ The window that lets you see everything without opening it.
The COSMO transparent door lets you check your eggs, temperature, and humidity at a glance, without opening the machine and losing heat. If it's opaque, scratched, or cracked, you lose visibility and airtightness.
Quick diagnosis: dull or yellowed door, deep scratches that obscure vision, cracks or breaks, door that doesn't close properly.
Solution: Original FIEM Transparent Door for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer in Mantua with a COSMO ML had a door so opaque from using harsh detergents that he couldn't see the eggs. To check on the hatching, he had to open it every time, losing heat. After replacing the door, he was able to monitor everything again without touching the machine.
⚠️ When to replace it: If the door is cloudy, yellowed, scratched, or cracked, it's time to replace it. A damaged door forces you to open the car to check, dispersing heat and humidity.
Essential data:
💶 Price: €19.85 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: COSMO DOOR
📋 Exploded view ref.: n. 7
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Incubation and hatching drawer + adjustable inserts for Fiem MG50 incubator without egg turner.
Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs
Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.
Trust Padovan Avicoltura, 40 years of experience at your service.
See reviews from other breeders by clicking HERE REVIEWS
EGG TURNING TROLLEY (MG50) + ADJUSTABLE INSERTS
ELTP2B-P thermostat probe: precise temperature measurement for optimal incubation control.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
ABS CO2 EXPULSION DAMPER Original Fiem spare parts (MG 50-70-100-140-200)
The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.
✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Original Spare Parts for Fiem Incubators : 30x40cm plastic hatching tray suitable for Fiem MG 100/150 Incubator, Fiem MG140/200 Incubator, MG 200/300 (S) . For example use, see second photo. Mesh lid available for purchase separately.
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
see also art. cod. 38 and cod. 56
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.
Italiano
Deutsch
Español
Français
