Fiem MG50 Incubator Q10 Fan Protection Net

💧 The semi-automatic humidification kit is an intelligent system that regulates humidity by rotating a bottle, without ever opening the incubator!

At €26.50 (excluding VAT) , the KIT.UM.SMART (component no. 15 in the exploded view) revolutionizes humidity management. It includes a bottle tank, support base, and connection tube, but the genius lies in the control: by screwing the tank, you progressively activate 1-2-3-4 water sectors in the Smart base, unscrewing them to reduce them to 4-3-2-1. Adjust the humidity from 38% to 62% simply by rotating an external bottle!

🎯 How does it work? The variable surface system is ingenious: screw in to increase the flooded sectors (more evaporation = more humidity), unscrew to reduce them. No openings, no temperature changes, total control! During incubation, you need 2 sectors (47-52%), for hatching you activate 4 (62%). Everything from the outside!

⚠️ When should you replace it? If the tank leaks, the sector adjustment mechanism no longer works, the hose is clogged, or if you want to add this intelligent automation to your Smart (only on compatible models).

💡 Revolutionary FIEM system: instead of opening the door twice a day, causing 2-3°C swings, you can adjust everything from the outside. Absolute professionalism!

✅ Compatible with Smart equipped with a 4-sector base (n°4) and pre-arranged lid (n°14).

📱 Want this revolution? Contact us on WhatsApp

🚚 Shipping from Como in 1 day. No minimum order. FIEM since 1975 , innovation for superior results. 24-month warranty for private individuals, 12 VAT numbers.

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.