RED LED BREEDER BULB

Reference: 9 - Brand: FIEM
€11.00
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

Red LED bulb for Fiem breeder

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

16 other products in the same category:

230V FIEM MAXIMUM TEMPERATURE ALARM MICRO SWITCH

€26.90
Availability: 103 In Stock

FIEM 230V MAXIMUM TEMPERATURE ALARM MICRO SWITCH: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Humidity Channel for Fiem Cip Cip 40 Incubator...

€7.93
Availability: 1799 In Stock
Humidity Channel for CIP 40 – The tray designed to ensure proper humidity. With two separate compartments, it allows for precise humidity adjustment during incubation and hatching by simply filling one or both compartments. A float, sold separately, can be inserted into one compartment and connected to the tank of the Fiem semi-automatic humidification system.

When is it needed? If the gutter is cracked, leaking, warped , or no longer fits properly, it should be replaced. A damaged gutter won't maintain the correct water level, compromising humidity and therefore hatching.

💰 Price: €6.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This channel is specific for CIP CIP 40. The CIP CIP 28 model uses different trays (350 TOP).

Minimum order €20: Add thermometer (€22.05), fuse (€0.42) or other spare parts to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Hatchery Tray 38x35 cm for Third Floor...

€32.00
Availability: 101 In Stock

Original Fiem Spare Parts : Metal drawer for hatching, 38x35 cm; lowered, suitable for the incubation and hatching section of the Fiem MG70/100 incubator. Capacity: approximately 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs.

Above only the first drawer at the top add a lid (code 207/2)

See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.

Fiem Smart Gearmotor Protection Cover / Plastic...

€6.54
Availability: 1000 In Stock

🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!

At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.

🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.

⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.

💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!

Specific for Smart , designed to perfectly close the gearmotor compartment.

📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.

Special removable drawer for beekeeping...

€48.00
Availability: 102 In Stock

One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Universal Incubation Basket 38x35 cm for Fiem...

€44.46
Availability: 191 In Stock

The 38x35 cm universal incubation basket is a versatile accessory, compatible with the Fiem MG70/100, MG100/150 and MG140/200 incubators. Thanks to its optimized structure, it can accommodate different types of eggs, adapting to their specific size. To lock the eggs in an upright position, we recommend purchasing the appropriate springs .

Compatible with Fiem MG70/100/150/140/200 incubators
Approximate capacity: 35 chicken eggs, 40 pheasant eggs, 135 red partridge eggs, 150 partridge eggs, 150 quail eggs, 30 turkey eggs
For goose eggs, purchase a dedicated drawer
Durable structure, easy to clean and install

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Probe for dig1 digital thermostat (Fiem spare...

€15.90
Availability: 102 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital thermostat probe. Only at Padovan Avicoltura will you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and after-sales consulting service, and user assistance to help you get the most out of your incubator.

Fiem Smart Precision Digital Thermostat T/H /...

€69.54
Availability: 1000 In Stock

🌡️ The digital thermostat is not a simple regulator: it is the electronic brain that maintains temperature and humidity with surgical precision, determining the life or death of your embryos!

At €57.00 (excluding VAT) , the DIG.SMART (part no. 7 in the exploded view) is the intelligent heart of your incubator. With a 3-digit digital display, it controls both temperature and humidity (T/H) with precision to the nearest tenth of a degree. It's not comparable to old analog thermostats: this is precise digital control that maintains a vital 37.7°C without lethal fluctuations.

🎯 As specified in the FIEM manual, pressing SET accesses the reference values, and using the up/down arrows adjusts the temperature (100°F) and humidity (47-62%). The display alternates between current temperature, humidity, and setpoint. This digital precision is the difference between hobbyists and professionals!

⚠️ When should you replace it? If the display doesn't light up or flashes, if the temperature fluctuates excessively, if it doesn't maintain setpoints, if the buttons don't respond (try the MEMB.TAST.DIG membrane first), or after years of technological upgrades.

💡 An inaccurate thermostat causes fatal temperature changes: at 36°C, embryos slow down; at 39°C, they die. Digital thermostats maintain accuracy of ±0.1°C!

Specific for Smart , digital version with integrated T/H control.

📱 Temperature issues? Send WhatsApp photos of the display and readings.

🚚 Ships from Como in 1 day. No minimum order. FIEM since 1975 , digital precision for professional results. 24-month warranty for private individuals, 12 VAT numbers.

Complete Egg Turning Motor Kit (117/E) for...

€55.61
Availability: 999 In Stock

🔄 The complete 117/E gearmotor is not just a motor: it is the ready-to-use kit with cams, joint and screws, all FIEM calibrated for immediate installation and perfect voltage!

At €45.58 excluding VAT , the 117/E gearmotor specifically for Smart includes everything you need: motor, transmission cams, connecting joint, and fixing screws. You don't have to search for compatible parts or worry about whether the joint is right—everything is included and pre-assembled to work perfectly together.

⚙️ The difference from the basic 117/F, which costs €44 excluding VAT? This includes the cams and joint already installed, calibrated for the precise 30-minute forward and 30-minute backward movement that replicates a brooding hen. As the FIEM manual indicates, this constant movement is vital to prevent the embryo from adhering to the shell. For €1.58, you'll have the peace of mind of a completely new replacement.

⚠️ When should you replace it? If the voltage is no longer working, if you hear gear noises, if the movement is irregular, if the cams or joints are worn, or if you're completely overhauling the system after years of use.

💡 The advantage of the complete kit: no doubts about part compatibility, faster installation, everything pre-assembled and FIEM tested. Ideal for those who want guaranteed operation!

Specific for Smart model as indicated in the description.

📱 Want to upgrade your entire voltage system? Contact us on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , complete kits for total peace of mind. 24-month warranty for private individuals, 12 VAT numbers.

Fiem ML-Advanced and EvoPlus Central...

€51.85
Availability: 498 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.

Available in the sensor-only version or complete with sensor + protection + cable

Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.

Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.

Slight decimal fluctuations are within the normal characteristics of this type of sensor.

⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
📋 Exploded view ref.: Varies depending on the model
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Precision Thermometer in Degrees Centigrade +20...

€26.90
Availability: 200 In Stock

The FIEM precision thermometer in degrees Celsius (+20/+40°C) is an essential accessory for monitoring the temperature in Fiem Smart incubators. It offers a clear and reliable reading, specifically calibrated for the optimal incubation range. This model is designed to ensure maximum compatibility with the Smart incubation chamber.

✔ Analogue temperature reading from +20°C to +40°C
✔ Compatible with Fiem Smart incubators
✔ High precision for thermal control during incubation
✔ Original Fiem spare part, easy to install

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please contact us via WhatsApp:
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!