FIEM square net mat for breeder (pheasant-partridge) dimensions 50x100 cm, 5x5 mm mesh.

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Q10 mesh shelf with stainless steel frame for drying pollen: efficient solution for maximum quality in incubation, original Fiem spare parts.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Stainless Steel Pollen Drying Tray with Mesh for A50

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

42.5x41cm stainless steel pollen drying tray with stainless steel mesh for Fiem bee incubators. Top quality for your beekeeping.

Original Spare Parts for Fiem Incubators : 38x45 cm metal hatching tray for the hatching compartment on the Fiem MG 100/150 (old model) and Fiem MG 140/200 (old model) incubators. The plastic tray is not suitable for models released after 2020. If you want to add a hatching tray to the incubation compartment, use the 38x35 cm tray.

For the incubation department, take the 38x35 model (code 56) or for the post 2020 model the plastic boxes (code cass.plast.100)

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

4W LED bulb with E14 socket (Fiem original spare parts)

Glutarsan is one of the most popular professional disinfectants in the poultry industry , widely used for sanitizing incubators and breeding facilities . Online reviews confirm its high efficacy against viruses, bacteria, and fungi , with rapid action times and no corrosive effect on materials. It is considered a safe, powerful, and versatile solution , ideal for maintaining high hygiene standards throughout the entire incubation cycle.
Recommended directly by FIEM , it proves to be the ideal choice for those who want complete protection and certified reliability .
Our opinion? An indispensable product for anyone working with chicks, fertile eggs, and environments with high microbial density. A must-have for hatcheries and farms!

The electronic control unit with large backlit LCD display allows you to manage a whole series of advanced parameters with extreme ease of use.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for compatibility and fitment.

Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

ELECTRONIC FAN MOTOR D.300mm 230V 50-60HZ (G-576)