250W + 350W Armored Heating Element (MG720-1000-1150h) 2 pieces (Original Fiem Spare Parts)

EGG TURNING DRAWER + NYLON INSERTS MG50-COLIBRI BIRD FIEM: the original spare part for your incubator.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

A breeder in Treviso contacted me about a strange noise from his CIP 28 incubator: "It sounds like something is scratching the fan blades." Upon opening the incubator, we found the protective mesh was deformed and touching the fan with each rotation. After replacing the mesh, the problem went away, and incubation continued without a hitch.

When is it needed? If you notice rubbing noises, the mesh probably needs replacing. Even after aggressive cleaning with corrosive products , or if the mesh appears visibly rusted, deformed, or has loosened meshes, it's time to replace it.

⚠️ ATTENTION WHEN ORDERING: There are two versions – always specify whether you need it for CIP CIP 28 or CIP CIP 40 when ordering. The dimensions are different and are not interchangeable.

📸 Not sure which model you have? Send us a photo of the incubator's identification plate (located on the back) on WhatsApp – we'll immediately confirm which network you need.

Installation: Quick and easy. Always unplug before opening. The net is attached with just a few screws; no electrician required.

💰 Price CIP CIP 28 and 40: €10.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Consider adding other maintenance parts (fuse, thermometer, humidity trays) to complete your order and reach the minimum threshold.

📦 Logistics: Ships within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM, leader in artificial incubation since 1975.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem spare parts from Padovan Avicoltura : ABS casing for MINI-LCD with front panel + FIEM switches + power cable

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility and fitment.

ELECTRONIC FAN MOTOR D.300mm 230V 50-60HZ (G-576)

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Fiem 1.5m tank-float connection tube for semi-automatic humidity control

MINI LED CONTROL UNIT COMPLETE WITH TEMP. AND HUMID. PROBES.

Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG100/150 Incubator

Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts.

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

The 200mm aluminum fan blade is an essential component for optimal ventilation inside Fiem MG70 incubators. Made of durable aluminum , it ensures uniform airflow, helping to maintain constant temperature and humidity for perfect incubation.

✔ Compatible with Fiem MG70 incubators
✔ 200mm diameter for even heat distribution
✔ Aluminum material for strength and durability
✔ Easy installation and maximum efficiency

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!