Upper ABS Shell for Fiem Cosmo Incubator
Upper ABS Shell for Fiem Cosmo Incubator
Upper ABS Shell for Fiem Cosmo Incubator
    Upper ABS Shell for Fiem Cosmo Incubator
    Upper ABS Shell for Fiem Cosmo Incubator
    Upper ABS Shell for Fiem Cosmo Incubator

Upper ABS Shell for Fiem Cosmo Incubator

Reference: SOPRA COSMO - Brand: FIEM
€63.90
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

⚙️ How the COSMO Upper Shell Works

The upper body is the "valve" that encloses the COSMO incubator at the top. It's not just a lid: it's the supporting structure that houses all the machine's vital components.

Inside the upper body are housed: the control panel (analogue, LCD EVO Plus or MiniLed Advanced depending on the model), the fan motor with blade, the silicone heating cable, the internal lighting bulb and the ventilation holes.

It's made of high-strength ABS plastic, the same material used for professional helmets and briefcases. The aerodynamic shape isn't just aesthetic: it optimizes the airflow generated by the fan, evenly distributing heat throughout the incubation chamber.

📋 Exploded view reference: This component corresponds to number 10 in the exploded view diagrams of FIEM COSMO incubators. Useful for identification during maintenance.

🔍 When to replace this part

Replace the COSMO upper shell if you notice:

  • ✓ Visible cracks: Even small cracks cause heat and moisture to escape.
  • ✓ Breakages at attachment points: where the GACOS or hinges attach.
  • ✓ Heat deformation: wavy or bent plastic near the resistor.
  • ✓ Damaged control unit housing: the control panel no longer fits properly.
  • ✓ Unstable temperature: the incubator struggles to maintain 37.7°C despite the heating element and control unit working.

⚠️ Why it happens and what you risk

The upper shell is damaged mainly by accidental impacts (falls, sudden movements) or prolonged thermal stress. Direct exposure to sunlight during storage can also weaken the plastic over time.

A cracked or warped body compromises thermal insulation: hot air escapes, cold air enters, and the heating element has to work harder to compensate. The result? Unstable temperatures, higher fuel consumption, and lower heating percentages. It's often thought to be a problem with the control unit or the heating element, but simply inspecting the bodywork will reveal the true cause.

✅ Compatibility verified

This body is specific for FIEM incubators of the COSMO series:

📦 COSMO Analog
All versions with analog thermostat

📦 COSMO EVO / EVO Plus
Versions with color LCD control unit

📦 COSMO ML (MiniLed Advanced)
Version with 3-digit digital display

⚠️ Important note: The chassis is the same for all COSMO versions. The housings are designed to accommodate both the analog panel and the digital control units (EVO Plus or MiniLed). The internal components (control unit, fan, resistor) must be purchased separately.

🔧 Assembly: complex operation

Estimated time: 45-60 minutes | Tools: Phillips screwdriver, pliers, and cable ties (if applicable)

Replacing the upper body requires disassembling and reassembling all internal components. This is a more complex operation than other replacement parts.

  1. Turn off and unplug the incubator
    Unplug the appliance. Let it cool completely.
  2. Photograph the connections
    Before disconnecting any wires, take detailed photos of all electrical connections. You'll need them for reassembly.
  3. Disassemble the internal components
    Remove the following in order: control panel, fan motor with blade, protective grille, heating cable, and bulb with socket. Keep the screws separate and tidy.
  4. Transfer to the new body
    Reassemble all the components on the new body in reverse order. Use the photos as a guide for connections.
  5. Final test
    Reconnect the incubator and check: the fan is running, the heating element is heating, and the control unit is reading the temperature and humidity correctly.
💡 Tip: If you're unsure, contact us on WhatsApp. We can also guide you step-by-step via video call.

🛡️ How to make it last longer

  • ✓ Placement: Keep the incubator away from external heat sources and direct sunlight.
  • ✓ Moving: Always lift the incubator from underneath (the lower body), never from the upper body.
  • ✓ Cleaning: Use only soft cloths and mild detergents. Avoid harsh solvents that can dull or weaken the plastic.
  • ⚠️ DON'T: Do not place weights on the body, do not force the closure if it does not latch easily.

🔗 Spare parts frequently purchased together

🔗 GACOS Hooks

The hooks that connect the upper and lower body. If the body was damaged, also check the condition of the hooks.
FIEM Code: GACOS

🔗 Fan Protection Net

The grille that protects the fan blades. Check this during disassembly.
FIEM Code: PROT.COS NETWORK

🔗 Heating Cable

The silicone cable that generates the heat. If the case has warped due to overheating, also check the resistance.
FIEM Code: R75F

🔗 COSMO Fund

The lower body. If you're doing a complete overhaul, assess the condition of both bodies.
FIEM Code: FONDO COSMO

📞 Warranty and assistance

✅ 2-year FIEM warranty
Covers manufacturing defects. If there are any problems within 24 months, you'll get a free replacement.

🔄 Returns within 14 days
If for any reason you change your mind (returns cost money, so make an informed purchase), you can return the intact product within 14 days.

📞 Technical support available
Free support via WhatsApp, email, or phone. We can also guide you via video call for body assembly.

🚀 Fast shipping from the FIEM Como warehouse
Ships within 24 hours - Tracked courier with delivery in 2-4 days throughout Italy.

🔒 100% secure payments

SOPRA COSMO

16 other products in the same category:

Fiem armored resistance 250 W + 350 W (MG720-1000-1150h)
FIEM

250W + 350W Armored Heating Element...

€80.00
Availability: 103 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Armored heating element 250 W + 350 W (MG720-1000-1150h) 2 pieces (Original Fiem Spare Parts) We rely only and exclusively on original spare parts from the manufacturers of each product, so that you do not have to resort to non-original spare parts that could compromise the correct functioning of your product and consequently cause irreparable damage and risks to your safety.

Net Fan Protection for Fiem MG70 Q12
FIEM

Q12 Fan Guard and Protective Net for Fiem MG70...

€6.80
Availability: 200 In Stock

Extended SEO Description (max 1000 characters)

The Q12 Fan Protection Net is an essential accessory for protecting the Fiem MG70 incubator fan, preventing accidental contact with the moving blades and improving system safety. Made of resistant materials, it allows optimal ventilation without obstructing airflow.

✔ Compatible with Fiem MG70 incubators
✔ Durable material for long life
✔ Prevents accidental contact with the fan
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing safety and reliability for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator

80mm Diameter Fan for Fiem Smart and Easy / Fan Motor mm80
FIEM

80mm Diameter Fan for Fiem Smart and Easy / Fan...

€39.10
Availability: 1000 In Stock

🌀 The fan is not an optional extra: it is the incubator's lung that evenly distributes heat and oxygen, determining the life or death of the embryos!

At €32.03 (excluding VAT) , the 80mm diameter UF80B23STH fan is the heart of the ventilation system in Smart and Easy incubators. Without its constant action, you would have lethal hot and cold zones, a disaster for hatching!

💨 This specific FIEM fan ensures optimal air circulation, designed for the size of the incubation chamber. Warm air is evenly distributed, fresh oxygen reaches each egg, and CO2 is expelled. It's this constant ventilation that keeps embryos alive!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it turns slower than normal, if it stops intermittently, if the blades are dirty or damaged, or if it loses efficiency after years of continuous use.

💡 A malfunctioning ventilator causes: embryonic mortality due to asphyxiation, irregular development, dead zones in the incubator, drastically reduced hatching rates.

✅ Compatible with Smart and Easy as specified in the FIEM price list.

📱 Is your fan making a noise or not spinning properly? Send us a WhatsApp video for immediate diagnosis.

🚚 Secure shipping from Como in 1 day. No minimum order for this item. FIEM since 1975 , vital components for professional results. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Quail Incubation Basket 38X35cm MG70 MG 100 MG 140
FIEM

Quail Incubation Basket 38X35cm MG70/100 MG...

€44.46
Availability: 97 In Stock

Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.

Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP

CIP 28 Metal Support for Humidity Trays
FIEM

CIP 28 Metal Support for Humidity Trays

€5.49
Availability: 1000 In Stock
CIP 28 Metal Humidity Tray Support – The bracket that holds the 2 water trays in place. This metal support ensures stability and proper positioning of the humidity trays inside the incubator.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

SHT31 ML/LCD Humidity Sensor for Fiem Incubators
FIEM

SHT31 Humidity Sensor with Electronic Board and...

€51.85
Availability: 5 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586

📌 Scroll below for a complete technical guide, compatibility, and calibration.

Fiem Wet Bulb Humidity Reading Wick
FIEM

1 m. Fiem wet bulb humidity reading wick...

€2.44
Availability: 963 In Stock
Wet Bulb Hygrometer Wick (1 meter) – Special replacement muslin wick for wet bulb hygrometers. Cotton material that wraps around the thermometer bulb and allows for precise measurement of relative humidity through evaporation. This consumable item requires frequent replacement to maintain accurate readings.

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

Fiem Pro Hatch / Remote Control / Remote Control
  • -€70.00
FIEM

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00
Availability: 28 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

  • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
  • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
  • ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
  • 🏠 Manage multiple incubators – One app for your entire fleet of machines
  • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥