Lid for Fiem MG and Astrale series humidity trays
Lid for Fiem MG and Astrale series humidity trays
    Lid for Fiem MG and Astrale series humidity trays
    Lid for Fiem MG and Astrale series humidity trays

Lid for Fiem MG and Astrale series humidity trays

Reference: 109 - Brand: FIEM
€3.17
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali

The Fiem humidity tray lid , compatible with the MG and Astrale series, is an original spare part designed to simply yet effectively regulate humidity inside the incubator . During incubation, humidity is generated naturally through the evaporation of the water contained in the tray. However, when the ambient humidity is already high or excessive humidity occurs inside the machine, it is useful to reduce the evaporating surface to bring the values back within optimal limits. This lid allows you to partially cover the tray , limiting evaporation and stabilizing the internal microclimate. It is a simple system, but essential for successful hatching. Each Fiem incubator in these series is equipped with a standard lid , but having an additional one is always recommended: it can be used as a spare or for more flexible humidity management in variable conditions, by covering the tray with 2 pieces.
🔧 Original Fiem steel spare part 14x9 cm
✅ Compatible with MG and Astrale
🛠️ Useful in high humidity conditions

Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

The Fiem humidity tray lid is a smart and practical accessory, designed for those who want to better control the relative humidity level inside the incubation chamber.

Fiem MG and Astrale series incubators use a system based on the natural evaporation of the water contained in the tray. This method is simple but highly effective. However, in certain seasons or in high-humidity environments, evaporation can generate excess internal relative humidity , which can compromise the health of the embryos and the quality of hatching.

Thanks to this cover , the surface exposed to the air can be mechanically reduced , and therefore the humidity generated can be reduced , without having to use external control units or humidifiers.

Main advantages:

  • Precise humidity control by reducing evaporation

  • No electrical connection required

  • Easily positioned and removable

  • Useful in situations of high environmental humidity

  • Also perfect as a spare part or to have a second unit always ready for use

Compatibility:

  • MG Series: MG 50, 70, 100, 140, 216, 316

  • Astral Series: all models

🛠 Note : One of these lids is already included with the incubator. Purchasing a second one can be useful for fine tuning or quick replacement.

109

16 other products in the same category:

SOLD OUT Complete Digital Thermostat DIG1 Fiem Spare Parts
  • Out-of-Stock
FIEM

SOLD OUT Complete Digital Thermostat DIG1 Fiem...

€198.99
Add to cart
Availability: Out of stock

Original Fiem spare parts from Padovan Avicoltura : Complete Digital Thermostat DIG1 Fiem spare parts. We rely exclusively on original spare parts from the manufacturers of each product, so you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and risks to your safety.

Fiem cable gland
FIEM

Fiem cable gland

€2.93
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and fitment.

ABS Cover for Fiem Control Panel

ABS Cover for Fiem Control Panel

€21.35
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • ✓ 🔍 Precise search for spare parts
  • ✓ ✅ Check component integrity before departure
  • ✓ 📦 Reinforced protective packaging
  • ✓ 📝 Accounting management and tracking

📌 Scroll below for a complete guide, compatibility, and installation.

Cable Gland for Fiem Smart and Cosmo Power Cables
FIEM

Cable Gland for Power Cable Fiem Smart and Cosmo

€0.77
Availability: 1000 In Stock

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

Replacement Fan 120x120mm (37/A) for CipCip 40/Inca Incubator
FIEM

Replacement Fan 120x120mm (37/A) for CipCip...

€47.14
Availability: 1000 In Stock

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

MESH SHELF WITH STAINLESS STEEL FRAME FOR FIEM API A-100/A-140 INCUBATOR
FIEM

MESH SHELF WITH STAINLESS STEEL FRAME FOR FIEM...

€36.40
Availability: 103 In Stock

Optimize bee incubation with the mesh shelf and stainless steel frame for the Fiem A-100/A-140 incubator. High quality and durability for your beekeeping.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Mesh shelf specifically for drying pollen Q10 MESH SHELF WITH STAINLESS STEEL FRAME FOR A316
FIEM

Mesh shelf specifically for drying pollen Q10...

€40.30
Availability: 103 In Stock

Q10 mesh shelf with stainless steel frame for drying pollen: efficient solution for maximum quality in incubation, original Fiem spare parts.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Plato Professional Holder 170 Quail Partridge Eggs Professional Fiem Victoria
FIEM

Plato carries 170 Fiem Victoria Professional...

€19.00
Availability: 103 In Stock

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 170 eggs, professional quail and partridge for Fiem incubators, astral series MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

Upper ABS Shell for Fiem Cosmo Incubator
FIEM

Upper ABS Shell for Fiem Cosmo Incubator

€63.90
Availability: 103 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.