2UF CABLE CAPACITOR FOR A4E300 FAN

METAL DAMPER FOR CO2 EXPULSION ORIGINAL FIEM SPARE PARTS

The 200mm aluminum fan blade is an essential component for optimal ventilation inside Fiem MG70 incubators. Made of durable aluminum , it ensures uniform airflow, helping to maintain constant temperature and humidity for perfect incubation.

✔ Compatible with Fiem MG70 incubators
✔ 200mm diameter for even heat distribution
✔ Aluminum material for strength and durability
✔ Easy installation and maximum efficiency

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Original Fiem spare parts FAN MOTOR D.300 A4E300 - 220 V (MG432-576-400H-540)

Original Spare Parts for Fiem Incubators : Power Cable. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest

Potentiometer for Fiem breeder Original spare parts

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for compatibility and fitment.

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Constant and professional humidity control with the FIEM Limpia 4-liter humidifier

Designed to optimize humidity management during incubation, the FIEM Limpia ultrasonic humidifier is the ideal choice for those seeking precision, silence, and automation. Thanks to its nebulization system, it ensures a uniform supply of cold steam within the incubator chamber, improving the embryonic development environment and hatching rates.

Perfect for integration with FIEM incubators equipped with a digital control unit for automatic humidity regulation. The 4-liter tank ensures autonomy and operational continuity.

Positive reviews online : Reliable, precise, compact, and quiet. Also appreciated for its easy connection to the compatible Evo Plus and Mini LED Advanced models.

Criticisms found on the web: Some users recommend using only distilled water

Original Fiem Spare Parts : Incubation and hatching drawer for Fiem MG50 incubator complete with egg turning kit.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

The electronic control unit with large backlit LCD display allows you to manage a whole series of advanced parameters with extreme ease of use.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

Check and calibrate your incubator with professional precision

The FIEM Check Up digital thermometer is the ideal tool for those who want to monitor the incubator's internal temperature reliably and safely. Designed to accurately measure the temperature within the optimal hatching range (32–42°C or 90–108°F), this thermometer features a flexible probe and a high-visibility digital display.

By purchasing this product, you will receive our exclusive guide created by Padovan Avicoltura as a FREE GIFT: a practical and illustrated manual with the best techniques for controlling and calibrating the temperature inside FIEM incubators.

Positive opinions on the web : The instrument is appreciated for its ease of use, reading accuracy and versatility of use.

Criticisms encountered: calibration a bit laborious but efficient

SEE LICCANDO GUIDE HERE

Original Spare Parts for Fiem Incubator : MG50 Useful for those who want to avoid dirtying the incubation drawer supplied with the machine.

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS  

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Armored heating element 250 W + 350 W (MG720-1000-1150h) 2 pieces (Original Fiem Spare Parts) We rely only and exclusively on original spare parts from the manufacturers of each product, so that you do not have to resort to non-original spare parts that could compromise the correct functioning of your product and consequently cause irreparable damage and risks to your safety.