ZenzQ Q10 expanded mesh shelf with 70x80 cm stainless steel frame for Fiem bee incubators. Maximum practicality and quality for your beekeeping.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original spare parts for Fiem incubators from Padovan Avicoltura : CIP 28-40 heating element - MG 50 silicone steel 2.06 m . Only at Padovan Avicoltura will you find efficient pre- and post-sales service and spare parts guaranteed over time.
Float Mod. C, horizontal inlet for Fiem incubator water tank
🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!
At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.
🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.
⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.
💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!
✅ Specific for Smart , designed to perfectly close the gearmotor compartment.
📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🦶 The foot that keeps the machine stable and level.
When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.
Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.
Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.
⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.
Essential data:
💶 Price: €0.60 + VAT (single sale)
🔧 Compatibility: All FIEM models
🏷️ Code: V284
📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.
Any questions? WhatsApp me: 351 881 9586
💬 Minimum order €20 (VAT excl.)
Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.
📌 Scroll below for full compatibility and fitment.
⚡ The power cord isn't just a wire: it's the lifeline that brings energy to the heart of your incubator, and quality makes the difference between safety and risk!
At just €2.84 (excluding VAT) , the SCHUCKO cable (SCHIUCKO in the price list) is the original FIEM power cord with a German Schuko plug, the European standard for safety and reliability. This isn't just any cable: it's specifically sized for the incubator's electrical load, with 1.5mm² conductors and heat-resistant insulation.
🔌 The Schuko plug with side grounding ensures a safe connection and protection from electric shock. As specified in the FIEM manual, the appliance MUST be connected to a system equipped with a protective earth - this cable guarantees it!
⚠️ When should you replace it? If the insulation is cut or scuffed, if the plug is damaged or burned, if the cable has been crushed or bent excessively, if you notice overheating during use, or if it has come into contact with water near the connectors.
💡 A damaged cable isn't just inefficient: it's dangerous! It can cause short circuits, overheating, sudden interruptions that compromise hatching, or worse, fire hazards.
✅ Compatible with all Smart and CipCip models with standard European 230V power supply.
📱 Concerned about the condition of your cable? Send photos of the plug and insulation on WhatsApp for safety checks.
🚚 Shipping from Como in 1 day. Minimum order €20 required. FIEM since 1975 , CE certified safety. 24-month warranty for private individuals, 12 VAT numbers.
A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."
⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.
When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.
What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.
Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.
💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.
Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.
💡 More info? Read the description below.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔌 The caps that close the internal holes and maintain insulation.
COSMO internal plugs are small plastic inserts that seal the fixing holes and openings in the bottom shell. They prevent heat and humidity loss, maintaining a stable incubation environment.
Quick diagnosis: missing, broken, or loose caps, open holes in the body, cold air drafts from below.
Solution: Original FIEM internal caps for the lower body of COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer from Rovigo noticed unstable temperatures in his COSMO EVO. After checking the control unit and heating element, he discovered that two caps on the bottom were missing. He replaced them and the problem was immediately solved.
⚠️ When to replace them: If the caps are missing or broken, cold air enters from the bottom and hot air escapes. These may seem like small details, but they make a difference in thermal stability.
Essential data:
💶 Price: €0.74 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: CAPS
📋 Exploded view ref.: n. 11
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
Water dispenser for Fiem hygrometer
Original Fiem Spare Parts from Padovan Avicoltura : Plate for 170 eggs, professional quail and partridge for Fiem incubators, astral series MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
NEW FAN complete with fan (MG300/316/320/316H)
🛡️ The fan guard isn't just a safety net: it's what prevents accidental contact with the moving blades and protects the fan itself from feathers and debris!
At €9.45 (excluding VAT) , the PROT.SMART is the protective metal mesh that covers the fan of your Smart incubator. It's not an optional accessory: it prevents objects, feathers, or worse, curious fingers from coming into contact with the rotating blades, and at the same time prevents debris from obstructing the fan and compromising ventilation.
🔧 This protective grille maintains optimal airflow while filtering out large particles that could damage the engine. The mesh is sized for maximum protection without impeding vital air circulation for embryos.
⚠️ When should you replace it? If the mesh is broken or bent, leaving dangerous gaps, if the mesh is warped and no longer fits properly, if it's rusted or corroded, or if it's missing after maintenance.
💡 Using the incubator without the protective grille is dangerous and can cause damage to the fan if objects enter the blades.
✅ Compatible with the Smart model as indicated in the FIEM price list.
📱 Is your grill damaged? Send us a photo on WhatsApp to check compatibility.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , safety in every detail. 24-month warranty for private individuals, 12 VAT numbers.
Mesh door for Fiem artificial breeder
COMPACT FAN DIAM.250 ASP (MG300/316)
LCD HUMIDITY SENSOR + CABLE AND CASE
Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.
ATTENTION: PRODUCT DISCONTINUED
The original Fiem control unit is no longer available. It has been replaced by the manufacturer with an upgrade kit that includes the new control unit and specific wiring harness for the adaptation.
[Link to the new replacement kit]
ADVICE BEFORE PURCHASE
Since this is a repair on incubators that have been in service for many years, we recommend carefully evaluating the overall condition of the machine. Consider whether repair costs are the most cost-effective option in the long run, or whether investing in replacing the entire incubator is more cost-effective.
Italiano
Deutsch
Español
Français
