🛡️ The gearmotor cover isn't just an aesthetic protection: it's the shield that protects the heart of the egg turning system from dust, humidity, and accidental tampering!
At just €5.36 (excluding VAT) , the 130-B cover protects the Smart's egg turning gear motor from external elements that could compromise its operation. It's more than just decorative plastic: it keeps the motor compartment isolated from the incubator's constant humidity, prevents dust from accumulating on the gears, and protects against accidental contact during operation.
🔒 As specified in the FIEM manual, the gearmotor is housed in an insulated compartment protected by this very cover. Without it, humidity from incubation penetrates the mechanism, dust accumulates, and the motor wears prematurely.
⚠️ When should you replace it? If it's cracked or broken, if it no longer seals the compartment tightly, if the plastic is warped and leaves cracks, if the attachment points are broken, or if it's missing after maintenance on the gearmotor.
💡 A missing or damaged cover exposes the expensive gearmotor (€44) to premature wear. For €5.36, you're protecting a much greater investment!
✅ Specific for Smart , designed to perfectly close the gearmotor compartment.
📱 Is the lid not closing properly? Send us a WhatsApp photo of the compartment and lid.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , protection for every component. 24-month warranty for private individuals, 12 VAT numbers.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Replace the lid when: cracks or breaks compromise the closure, it no longer latches properly, deformed plastic leaves gaps, damaged fixing points, after work on the gearmotor, for hygiene and renovation purposes.
If it doesn't close: check that the latch points are intact, check for any deformations, and make sure it's the correct model. If damaged, replace.
| Code | 130-B |
| Description | PLASTIC COVER for TURNING MOTOR |
| Compatibility | Smart |
| Function | Closing the gearmotor compartment |
| Material | Plastic |
| Price | €5.36 excluding VAT |
Remove the old, damaged cover. Clean the edges of the gear motor compartment. Place the new cover, checking alignment. Press until you hear a click. Check for an airtight seal around the entire perimeter.
The cover protects against: moisture infiltration into the motor, dust accumulation on the gears, accidental contact, and inadvertent tampering. FIEM manual: "compartment isolated and protected by a cover."
Required for: warehouse management, component verification, packaging, administration, tracked shipping.
Is it really necessary?
Yes, it protects €44 gearmotors from premature wear.
Does it affect operation?
Yes, without protection, moisture will damage the engine over time.
© 2025 Padovan Avicoltura. FIEM distributor. Complete egg turning system protection. Prices exclude VAT, 24-month warranty for private individuals/12 VAT numbers.
Original spare parts for Fiem incubators from Padovan Avicoltura : Single-pole switch. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.
Original Fiem spare parts for sliding PVC doors in artificial breeders: quality and precision for optimal operation.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
The 2.00 m / 143W 170 OHM/MT silicone heating cable is an essential component for the correct functioning of the Fiem MG50, MG70, MG100, MG140, MG320 incubators. This heating element ensures uniform heat distribution, ensuring a stable incubation environment for optimal embryo development.
✔ Compatible with Fiem MG50, MG70, MG100, MG140, MG320 incubators
✔ Length 2 meters, power 143W, resistance 170 OHM/MT
✔ Even heating for a constant temperature
✔ Silicone construction for high strength and durability
By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :
The Q12 Fan Protection Net is an essential accessory for protecting the Fiem MG70 incubator fan, preventing accidental contact with the moving blades and improving system safety. Made of resistant materials, it allows optimal ventilation without obstructing airflow.
✔ Compatible with Fiem MG70 incubators
✔ Durable material for long life
✔ Prevents accidental contact with the fan
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing safety and reliability for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Spare Parts and Exotic Options Fiem Incubation Tray Complete with cylindrical inserts mg50 and Colibri
Original Fiem Spare Parts from Padovan Poultry Farming : Professional 96-Egg Holder for Fiem Astral Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
The FIEM 60–95°F thermohygrometer, made in Germany, is an essential tool for accurate, manual monitoring of temperature and relative humidity in incubators. Thanks to its simplified, easy-to-read scale, it allows for intuitive readings even for less experienced operators. Used with the cotton sock for wet-bulb measurement, it ensures ideal environmental control for proper incubation.
✔ Easy and precise reading of temperature and humidity
✔ Optimal incubation range: 60–95°F
✔ Made in Germany: quality and reliability
✔ Original Fiem spare part compatible with all analog models
By purchasing this spare part, you choose the safety of the Fiem brand and the technical support of Padovan Avicoltura.
ATTENTION: Please check carefully that the spare part matches the image.
🥚 The Smart net is not a simple shelf: it is the perforated technical floor that supports the eggs allowing perfect circulation of air and humidity from below!
At €9.70 (excluding VAT) , the SMART PL. NET (component no. 11 in the exploded view) is the support grid where you place your eggs. Its perforated structure is not random: it allows warm air to circulate evenly from bottom to top and the humidity from the four sectors below to evaporate, reaching the eggs, creating the perfect microclimate essential for embryonic development.
💨 As the FIEM manual specifies, air circulation is as crucial as temperature. Hot air rises through the mesh, enveloping each egg evenly, while the moisture evaporating from the trays at the base passes through the grill, maintaining the proper 47-62% ratio needed for the various stages.
⚠️ When should you replace it? If the mesh is broken or warped, compromising the egg holder, if the plastic is bent, creating unevenness, if it's clogged with debris blocking airflow, or after several cycles, when thorough cleaning is required.
💡 The mesh size is designed to hold eggs of various sizes (from quail to goose), always ensuring optimal airflow and humidity. Without this perforated grid, you wouldn't have the necessary ventilation!
✅ Compatible exclusively with the Smart model . Specific dimensions and design to fit perfectly into the structure.
📱 Not sure about your network conditions? Send photos on WhatsApp for instant verification.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , components designed for professional results. 24-month warranty for private individuals, 12 VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Solid State Relay MP 240 D4 Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to always keep your incubator efficient, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.
Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.
Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.
Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.
💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.
Compatibility: Universal - works with any forced-air or still-air incubator
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
COMPLETE EGG TURNER GEAR MOTOR (MG50)
A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.
When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.
💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.
Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Incubation and hatching drawer + adjustable inserts for Fiem MG50 incubator without egg turner.
Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs
Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.
Trust Padovan Avicoltura, 40 years of experience at your service.
See reviews from other breeders by clicking HERE REVIEWS
EGG TURNING TROLLEY (MG50) + ADJUSTABLE INSERTS
Italiano
Deutsch
Español
Français
