- Out-of-Stock
Original Fiem spare parts from Padovan Avicoltura : Complete Digital Thermostat DIG1 Fiem spare parts. We rely exclusively on original spare parts from the manufacturers of each product, so you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and risks to your safety.
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."
⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.
When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.
What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.
Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.
💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.
Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.
💡 More info? Read the description below.
When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.
💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).
Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : NEW HUMIDIFICATION SYSTEM with immersion cartridge resistance: a delicate and constant humidification system with digital regulation through the evaporation of heated water – available for multiple models
RESISTANCE ONLY to be combined with the semi-automatic humidification system kit. See photo.
Padovan Poultry Farming 360° Service
90th Professional Consulting Pre-sale for a targeted purchase.
180° Specialist Post-Sales Consultancy for correct use.
360° Spare Parts Assistance to keep your purchase running efficiently.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : NEW HUMIDIFICATION SYSTEM with immersion cartridge resistance: a delicate and constant humidification system with digital regulation through the evaporation of heated water – available for multiple models
RESISTANCE ONLY + connection cable to be combined with the semi-automatic humidification system kit. See photo.
Padovan Poultry Farming 360° Service
90th Professional Consulting Pre-sale for a targeted purchase.
180° Specialist Post-Sales Consultancy for correct use.
360° Spare Parts Assistance to keep your purchase running efficiently.
🥚 The Smart net is not a simple shelf: it is the perforated technical floor that supports the eggs allowing perfect circulation of air and humidity from below!
At €9.70 (excluding VAT) , the SMART PL. NET (component no. 11 in the exploded view) is the support grid where you place your eggs. Its perforated structure is not random: it allows warm air to circulate evenly from bottom to top and the humidity from the four sectors below to evaporate, reaching the eggs, creating the perfect microclimate essential for embryonic development.
💨 As the FIEM manual specifies, air circulation is as crucial as temperature. Hot air rises through the mesh, enveloping each egg evenly, while the moisture evaporating from the trays at the base passes through the grill, maintaining the proper 47-62% ratio needed for the various stages.
⚠️ When should you replace it? If the mesh is broken or warped, compromising the egg holder, if the plastic is bent, creating unevenness, if it's clogged with debris blocking airflow, or after several cycles, when thorough cleaning is required.
💡 The mesh size is designed to hold eggs of various sizes (from quail to goose), always ensuring optimal airflow and humidity. Without this perforated grid, you wouldn't have the necessary ventilation!
✅ Compatible exclusively with the Smart model . Specific dimensions and design to fit perfectly into the structure.
📱 Not sure about your network conditions? Send photos on WhatsApp for instant verification.
🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , components designed for professional results. 24-month warranty for private individuals, 12 VAT numbers.
The single egg turning bar for the Fiem MG70/100 incubator is a fundamental component for ensuring the correct movement of eggs during incubation. Designed to be compatible with the Fiem MG70 and MG100 models, it ensures smooth and uniform rotation , preventing the risk of the embryo adhering to the shell.
✔ Compatible with Fiem MG70 and MG100 incubators
✔ Ensures uniform rotation for optimal hatching
✔ Strong and durable materials
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔌 The caps that close the internal holes and maintain insulation.
COSMO internal plugs are small plastic inserts that seal the fixing holes and openings in the bottom shell. They prevent heat and humidity loss, maintaining a stable incubation environment.
Quick diagnosis: missing, broken, or loose caps, open holes in the body, cold air drafts from below.
Solution: Original FIEM internal caps for the lower body of COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer from Rovigo noticed unstable temperatures in his COSMO EVO. After checking the control unit and heating element, he discovered that two caps on the bottom were missing. He replaced them and the problem was immediately solved.
⚠️ When to replace them: If the caps are missing or broken, cold air enters from the bottom and hot air escapes. These may seem like small details, but they make a difference in thermal stability.
Essential data:
💶 Price: €0.74 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: CAPS
📋 Exploded view ref.: n. 11
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🪟 The transparent window that lets you check without opening.
When it has cracks, clouding or warping, you lose visibility and risk heat and humidity losses.
Quick diagnosis: opaque PVC, cracks, door that doesn't close tightly, or warping. Every opening disrupts critical parameters.
Solution: FIEM transparent PVC door for CIP 28 and 40. Watertight and maximum visibility. Lifespan: 6–8 years.
📌 Real case: Treviso breeder with CIP 40, door warped and unable to maintain proper humidity. Replaced, humidity perfect, hatching improved.
⚠️ When to replace: at the first signs of clouding. Opening the egg frequently reduces hatching.
Essential data:
💶 Price:
• CIP CIP 28: €13.00 + VAT
• CIP CIP 40: €19.50 + VAT
🔧 Compatibility: CIP CIP 28 or 40
🏷️ Code: PVC DOOR CIP 28/40
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Any doubts? Photo of the tag on WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT (CIP 28 model), reach the minimum amount by adding additional items. The CIP 40 model already exceeds the threshold.
Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.
📌 Scroll below for assembly and maintenance guide.
The rubber air inlet ring is a component designed to ensure optimal airflow regulation in Fiem incubators. This replacement part ensures a perfect fit, preventing leaks and ensuring a stable environment for proper egg incubation. Made of resistant and durable rubber , it ensures long life and easy installation.
By purchasing this product, you choose original Fiem spare parts , compatible with your incubator to maintain high performance and reliability.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.
Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.
Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.
⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.
Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
The Fiem 40x10x4h humidity tray with fork and float is designed for the semi-automatic humidification system of Fiem incubators. This accessory ensures optimal humidity control inside the machine, ensuring a constant supply of water thanks to the integrated float . Its compact and durable design allows for effective evaporation management, promoting ideal conditions for incubation.
✔ Compatible with various Fiem incubator models
✔ Float system for constant humidity
✔ Durable and easy to clean materials
✔ Simple and practical installation
By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator .
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :
Fiem 1.5m tank-float connection tube for semi-automatic humidity control
Original Fiem Spare Parts : Pheasant Incubation Basket, 38x35 cm
Suitable for Fiem MG200 incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
Original Fiem Spare Parts : Riccioli (1pc) Resistance Holder for Fiem MG50 Incubator
Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts