🎛️ The front panel is not just an aesthetic mask: it is the access panel to the electronic heart of your Smart, protecting the vital controls!

At just €7.50 (excluding VAT) , the F/SMART front panel (part no. 7 in the exploded view) is the front cover that protects the incubator's controls and makes them accessible. It's more than just decorative plastic: it keeps the switches and display protected from the constant humidity of the incubation environment.

⚡ This seemingly simple component performs critical functions: it protects electrical components from moisture and dust, maintains access to controls, prevents accidental contact with electrical parts, and ensures the professional appearance of your incubator.

🔧 When should you replace it? If it's cracked or broken, if it no longer attaches properly to the frame, if the plastic is discolored or warped from heat, if the switch or display holes are damaged, or after maintenance that has compromised it.

💡 The faceplate covers the area where the thermostat, switches, and electrical connections are located. Inadequate protection in this area can cause malfunctions due to moisture penetrating the circuitry.

✅ Compatible exclusively with the Smart model . The specific design fits perfectly into the FIEM control housing.

📱 Not sure if this is the right part? Send us photos of your current front panel and control panel on WhatsApp .

🚚 Ships from Como in 1 business day. Minimum order €20 required - add other small spare parts such as thermometer clips or cable glands. FIEM since 1975 , Padovan Avicoltura guarantees original spare parts. 24-month warranty for private individuals, 12 VAT numbers.

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

🔧 Do you know what the most underrated part of the incubator is? The little clip that holds the thermometer in place!

It may seem incredible, but this tiny ABS clip, worth just €0.53 (excluding VAT), is essential for holding the thermometer in the correct position. The 17A clip is FIEM's specific support for the 05/A thermometer.

💡 If the thermometer doesn't stay in place or moves while turning the eggs, the readings become unreliable. A damaged clip can compromise temperature monitoring, which is crucial for hatching.

⚠️ As specified in the FIEM manual, the thermometer should be inserted into the clip from the bottom up, rotating slightly—never attach it from the front to avoid breakage. This correct procedure protects both the thermometer and the clip itself.

📍 When should you replace it? If the thermometer won't stay in place, if it moves or falls, if you see cracks in the plastic, or if you need to use alternative means to hold it in place. Given the minimal cost, it's a good idea to have a spare.

✅ Compatible with all Smart, CipCip 28 and CipCip 40 models. In the 2025 price list it is indicated as "ABS THERMOMETER HOLDER" and costs only €0.53.

🛒 Important: This item requires a minimum order of €20 (excluding VAT). You can add the 05/A thermometer for €22.05, which already exceeds the threshold, or other small spare parts such as the P67 cable gland (€0.63) or the MEMB.TAST.DIG keyboard membrane (€2.80).

📱 Not sure about compatibility? Send us a photo of the incubator, model plate, current clip, and thermometer on WhatsApp . We'll confirm everything promptly during business hours.

🚚 We ship from Como in 1 business day, with delivery throughout Italy in 2-4 days. FIEM since 1975 , we at Padovan Avicoltura are official distributors with the entire range of spare parts always available. 24-month warranty for private individuals, 12 months for VAT numbers.