Fiem MG140/200 Single Egg Turning Bar Incubator

The egg retaining springs for Fiem MG series incubators are original spare parts designed to ensure the correct positioning of eggs in the egg holders, especially when a row is incomplete. If all the eggs are missing from a row, there's a risk that the eggs will tilt or tip over during automatic rotation. The springs solve this problem by firmly locking the eggs into the empty compartments, keeping them upright and stable throughout the incubation period.

Compatible with all Fiem MG series incubators (MG 50, MG 70, MG 100, MG 140, MG 200 and above), these springs are made of strong and durable spring steel , designed to fit perfectly into the supplied tilting baskets. They are easy to install without tools, improve incubation safety, and ensure a higher hatching rate, even when the machine is partially used.

Rely on original Fiem spare parts , available from Padovan Avicoltura , to maintain high quality standards and protect your eggs at every stage.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for compatibility and fitment.

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FIEM Automatic Humidity Tray Cover With Internal Ultrasonic Nebulizer Reference: KIT.UMID.INT.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

The Fiem plastic case for thermometers/hygrometers is an essential accessory for protecting temperature and humidity sensors from impacts, dust, and external humidity. Designed to ensure maximum safety for measuring devices, this case is made of resistant and durable material , perfect for prolonged use in incubators.

✔ Compatible with Fiem thermometers and hygrometers
✔ Effective protection against impacts and external agents
✔ Durable plastic material for long life
✔ Easy installation and removal

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.

✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Optional Fiem Climatic Chambers with UVB+UVA fluorescent lamp lighting

SINGLE FAN SPEED VARIATOR

Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest

Spare parts for Fiem breeders: removable metal drawer

Choose Original Fiem Spare Parts for the removable metal drawer of the breeder: they ensure optimal functionality and long life.

Please check that the required part matches the image provided. If you have any questions or are having trouble finding the part you're looking for, please send us a photo of the component you need via WhatsApp. Thank you.

Original Fiem Spare Parts : Metal drawer for hatching, 38x35 cm; lowered, suitable for the incubation and hatching section of the Fiem MG70/100 incubator. Capacity: approximately 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs.

Above only the first drawer at the top add a lid (code 207/2)

See reviews from other breeders by clicking BREEDERS' REVIEWS, a service managed by Google.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.