Mesh Drawer for Turtles 30x50 cm
    Mesh Drawer for Turtles 30x50 cm

Mesh Drawer for Turtles 30x50 cm

Reference: - Brand:
€46.36
Tax included
Non ci sono ancora recensioni
normalmente 2/4 giorni feriali
Quantity
Add to wishlist
In Stock

  SECURE PAYMENT METHODS

Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.

  SHIPPING COSTS

Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.

  Free Consultation

Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.

SPEDIZIONE A COSTO FISSO

Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.

16 other products in the same category:

FIEM Thermometer +20 / +40°C in °C for Smart Incubator
FIEM

Precision Thermometer in Degrees Centigrade +20...

€26.90
Availability: 200 In Stock

The FIEM precision thermometer in degrees Celsius (+20/+40°C) is an essential accessory for monitoring the temperature in Fiem Smart incubators. It offers a clear and reliable reading, specifically calibrated for the optimal incubation range. This model is designed to ensure maximum compatibility with the Smart incubation chamber.

✔ Analogue temperature reading from +20°C to +40°C
✔ Compatible with Fiem Smart incubators
✔ High precision for thermal control during incubation
✔ Original Fiem spare part, easy to install

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please contact us via WhatsApp:
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Replacement Fan 120x120mm (37/A) for CipCip 40/Inca Incubator
FIEM

Replacement Fan 120x120mm (37/A) for CipCip...

€47.14
Availability: 998 In Stock

🌀 The ventilator is the incubator's lung, distributing oxygen and heat evenly, saving the embryos from dead zones! (Explodson.3)

At €38.64 (excluding VAT) , the 120x120mm 37/A fan is the beating heart of the CipCip 28/40 and Inca. When it spins, it creates the vital circulation that eliminates deadly CO2 pockets and distributes the 37.7°C temperature evenly. Without it? Temperatures would be layered: 35°C at the bottom, 40°C at the top. Disaster guaranteed.

⚡ This specific FIEM model is designed for gentle ventilation during the first few weeks. It's not an industrial fan that dries eggs, but a calibrated system that maintains humidity while moving air. It's the difference between hobbyists and professionals!

⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it runs jerkily, if it doesn't start consistently, or preventively after 4-5 years of heavy use. A slow fan indicates low hatching.

💡 *"A customer from Bergamo calls me: CipCip 40 with 50% hatching. Fan not working properly. Replaced with a new 37/A: next cycle 91% hatching!"*

✅ Specifically designed for Inca, CipCip 28 and CipCip 40. Quality metal bearings for extended life.

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day, delivery 2-4 days. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

Fiem Spare Parts for Incubation and Hatching Tray with MG50 Egg Turning Kit
FIEM

Incubation and Hatching Tray with Egg Turning...

€120.00
Availability: 103 In Stock

Original Fiem Spare Parts : Incubation and hatching drawer for Fiem MG50 incubator complete with egg turning kit.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Offline Order

Offline Order

€1.70
Availability: 60 In Stock

The site allows everyone to make online purchases. For those who wish to purchase offline by submitting their information, we will make the online purchase for you at a small surcharge.

MESH SHELF WITH STAINLESS STEEL FRAME FOR FIEM API A-100/A-140 INCUBATOR
FIEM

MESH SHELF WITH STAINLESS STEEL FRAME FOR FIEM...

€36.40
Availability: 103 In Stock

Optimize bee incubation with the mesh shelf and stainless steel frame for the Fiem A-100/A-140 incubator. High quality and durability for your beekeeping.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

2 Amp Glass Fuse for Fiem Incubators
FIEM

2 Amp Glass Fuse for Fiem Incubators

€0.51
Availability: 965 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
⚡ Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

Fiem: Silicone heating element for Inca MG series and Astrale series incubators
FIEM

Fiem Inca Incubator Heating Element

€15.00
Availability: 102 In Stock

Original Spare Parts for Fiem Incubators from Padovan Avicoltura Resistance for Fiem Inca Incubator : Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

Hole Cover Bushing in PLT BPA 1600 Neutral CIP CIP28-40
FIEM

Hole Cover Bushing in PLT BPA 1600 Neutral CIP...

€1.42
Availability: 997 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.

Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.

Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.

⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.

Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

Metal Protection for Electrical Terminals for Fiem Smart
FIEM

Metal Protection for Electrical Terminals for...

€2.30
Availability: 1000 In Stock

🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!

At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.

⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.

🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.

⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.

✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.

📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.

🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.

Transparent PVC Door Cip cip 28/40
FIEM

Transparent PVC Door Cip cip 28/40

€15.86
Availability: Out of stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🪟 The transparent window that lets you check without opening.
When it has cracks, clouding or warping, you lose visibility and risk heat and humidity losses.

Quick diagnosis: opaque PVC, cracks, door that doesn't close tightly, or warping. Every opening disrupts critical parameters.

Solution: FIEM transparent PVC door for CIP 28 and 40. Watertight and maximum visibility. Lifespan: 6–8 years.

📌 Real case: Treviso breeder with CIP 40, door warped and unable to maintain proper humidity. Replaced, humidity perfect, hatching improved.

⚠️ When to replace: at the first signs of clouding. Opening the egg frequently reduces hatching.

Essential data:
💶 Price:
• CIP CIP 28: €13.00 + VAT
• CIP CIP 40: €19.50 + VAT
🔧 Compatibility: CIP CIP 28 or 40
🏷️ Code: PVC DOOR CIP 28/40
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Any doubts? Photo of the tag on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT (CIP 28 model), reach the minimum amount by adding additional items. The CIP 40 model already exceeds the threshold.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for assembly and maintenance guide.

Monofoam Gasket 3mm x 1m for Fiem Incubators
FIEM

Monofoam Gasket, 3mm Thick x 1m, for Fiem...

€3.46
Availability: 168 In Stock

The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.

✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!