Monofoam Gasket, 3mm Thick x 1m, for Fiem Incubators - Original Fiem Spare Parts

⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!

At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.

🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!

⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.

💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!

✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.

📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.

🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.

🔧 The gear motor support is not just a piece of plastic: it is the stable base that keeps the egg turning motor perfectly aligned for smooth and precise movement!

For just €3.36 (excluding VAT) , the SUPP.VOLT. is the plastic support that holds the gearmotor in the correct position inside the Smart. Without an intact and well-positioned support, the gearmotor vibrates, becomes misaligned, and the movement becomes irregular, compromising the delicate turning of the eggs.

⚙️ This mount holds the gear motor at the correct height and angle to transmit power to the egg turning grid. It's specifically designed to absorb vibrations from the motor during continuous operation, preventing premature wear and annoying noises.

⚠️ When should you replace it? If it's cracked or broken, if the gearmotor moves or vibrates excessively, if the plastic is warped from heat or age, if the fastening points are damaged, or if it's missing after maintenance.

💡 A damaged support causes: gearmotor-grid misalignment, premature wear of the coupling, irregular egg movement, abnormal noises during operation.

✅ Specific for the Smart model as indicated in the FIEM price list.

📱 Is the gearmotor vibrating or making noise? Send a photo on WhatsApp.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , every detail counts for perfect automation. 24-month warranty for private individuals, 12 VAT numbers.

🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!

At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.

⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.

🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.

⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.

✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.

📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.

🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.

🥚 The Smart net is not a simple shelf: it is the perforated technical floor that supports the eggs allowing perfect circulation of air and humidity from below!

At €9.70 (excluding VAT) , the SMART PL. NET (component no. 11 in the exploded view) is the support grid where you place your eggs. Its perforated structure is not random: it allows warm air to circulate evenly from bottom to top and the humidity from the four sectors below to evaporate, reaching the eggs, creating the perfect microclimate essential for embryonic development.

💨 As the FIEM manual specifies, air circulation is as crucial as temperature. Hot air rises through the mesh, enveloping each egg evenly, while the moisture evaporating from the trays at the base passes through the grill, maintaining the proper 47-62% ratio needed for the various stages.

⚠️ When should you replace it? If the mesh is broken or warped, compromising the egg holder, if the plastic is bent, creating unevenness, if it's clogged with debris blocking airflow, or after several cycles, when thorough cleaning is required.

💡 The mesh size is designed to hold eggs of various sizes (from quail to goose), always ensuring optimal airflow and humidity. Without this perforated grid, you wouldn't have the necessary ventilation!

✅ Compatible exclusively with the Smart model . Specific dimensions and design to fit perfectly into the structure.

📱 Not sure about your network conditions? Send photos on WhatsApp for instant verification.

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975 , components designed for professional results. 24-month warranty for private individuals, 12 VAT numbers.