When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility and fitment.

When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

Why thousands of farmers will no longer be able to do without it

• 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
• 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
• ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
• 🏠 Manage multiple incubators – One app for your entire fleet of machines
• 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for compatibility and fitment.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for a complete guide, compatibility, and installation.

The Fiem plastic case for thermometers/hygrometers is an essential accessory for protecting temperature and humidity sensors from impacts, dust, and external humidity. Designed to ensure maximum safety for measuring devices, this case is made of resistant and durable material , perfect for prolonged use in incubators.

✔ Compatible with Fiem thermometers and hygrometers
✔ Effective protection against impacts and external agents
✔ Durable plastic material for long life
✔ Easy installation and removal

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

The transparent door window with gray support is an essential spare part for Fiem incubators, designed to ensure optimal visibility inside the machine without compromising its thermal insulation . The gray support ensures stable attachment, while the transparent material allows you to easily monitor the incubation process.

✔ Compatible with Fiem incubators
✔ Transparent material for immediate incubation control
✔ Sturdy grey stand for stable fixing
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and optimal performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

The FIEM Mini LED control unit is an advanced incubator control system, designed to ensure precise temperature and humidity management. Equipped with a large seven-segment display, it offers clear and immediate readings. Thanks to the connection to the FIEM Limpia automatic humidifier, it allows direct humidity control.

Main features:

• ✔ Bright display with decimal units for accurate reading
• ✔ Humidity display and adjustment with humidifier connection
• ✔ °C/°F conversion to suit different needs
• ✔ PID/ON-OFF temperature control mode
• ✔ Digital sensor calibration for optimal accuracy
• ✔ Dual temperature and humidity sensor for greater reliability

⚠️ OLD VERSION: This is the previous version of the MiniLED control unit. For newer incubators, the MiniLED Advanced (NEW) is available with a green LED display and improved features.

💰 Price: €110.30 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO – Padovan Avicoltura: only original FIEM components for reliable and long-lasting performance of your incubator.

Compatibility: CIP CIP, MG50, MG70, MG100, API Series (check specific model)

Includes: Complete control unit with double temperature and humidity sensor

By purchasing this product, you choose original FIEM spare parts, guaranteeing high performance for your incubator.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

The single egg turning bar for the Fiem MG70/100 incubator is a fundamental component for ensuring the correct movement of eggs during incubation. Designed to be compatible with the Fiem MG70 and MG100 models, it ensures smooth and uniform rotation , preventing the risk of the embryo adhering to the shell.

✔ Compatible with Fiem MG70 and MG100 incubators
✔ Ensures uniform rotation for optimal hatching
✔ Strong and durable materials
✔ Easy to install and replace

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!