💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)
The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.
🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.
⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.
💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!
✅ Compatible with FIEM humidity probes .
📱 Problems with humidity readings? Send photos on WhatsApp
🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Replace the case when: cracks compromise protection, heat deformations, openings blocked by limescale/deposits, it no longer fits properly, after aggressive cleaning, together with probe replacement.
If humidity is a concern: check the case is intact, clean any obstructed openings, and check that the probe is properly inserted. If the case is damaged, replace it before damaging the probe.
| Code | CUST.S.UMID |
| Description | CASE/PROTECTION HUMIDITY SENSOR |
| Function | Humidity probe protection |
| Compatibility | FIEM humidity probes |
Carefully remove the old case. Do not touch the humidity sensor directly. Insert the probe into the new case. Make sure it is well protected but with openings clear. Place it in the incubator according to the manual.
The case guarantees: protection from direct water splashes, reduction of excessive condensation, mechanical protection from impacts, maintenance of reading accuracy, longer probe life.
With case consider: Complete humidity probe if that is also damaged, DIG.SMART Thermostat (€57.00) for T/H control.
Periodically clean the openings with gentle compressed air. Do not use aggressive liquids. Check the integrity of the incubator each time you clean it.
Is it really necessary?
Yes, without a case the probe will quickly damage.
Universal for all probes?
Specification for FIEM humidity probes.
The openings are blocked, what to do?
Gentle compressed air or replacement if too compromised.
© 2025 Padovan Avicoltura. FIEM distributor. Protection for delicate sensors. Prices exclude VAT, 24-month warranty for private individuals/12 VAT numbers.
230mm DIAM. ALUMINUM FAN (MG100-COSMO-140-316H)
Original spare parts for Fiem incubators from Padovan Avicoltura : 500 W armored heating element - (MG800H). Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
ATTENTION: PRODUCT DISCONTINUED
The original Fiem control unit is no longer available. It has been replaced by the manufacturer with an upgrade kit that includes the new control unit and specific wiring harness for the adaptation.
[Link to the new replacement kit]
ADVICE BEFORE PURCHASE
Since this is a repair on incubators that have been in service for many years, we recommend carefully evaluating the overall condition of the machine. Consider whether repair costs are the most cost-effective option in the long run, or whether investing in replacing the entire incubator is more cost-effective.
NEW FAN complete with fan (MG300/316/320/316H)
The rubber air inlet ring is a component designed to ensure optimal airflow regulation in Fiem incubators. This replacement part ensures a perfect fit, preventing leaks and ensuring a stable environment for proper egg incubation. Made of resistant and durable rubber , it ensures long life and easy installation.
By purchasing this product, you choose original Fiem spare parts , compatible with your incubator to maintain high performance and reliability.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
The FIEM 85–110°F precision thermometer, made in Germany, is designed to provide a clearer, simpler, and more immediate temperature reading in incubators. Ideal for everyday use in both professional and amateur settings, it guarantees accuracy and ease of use. Compatible with all FIEM incubators with analog readout, it is a reliable and long-lasting accessory.
✔ Simplified and intuitive temperature reading
✔ Ideal incubation range: 85–110°F
✔ Made in Germany: highest quality and readability
✔ Original Fiem spare part, ready to use
By purchasing this item, you choose reliability, precision, and practicality, improving environmental control in your incubators.
ATTENTION: Please check carefully that the spare part matches the image.
The 5W-34 220V fan motor is an essential component for ensuring uniform air circulation inside Fiem MG50, MG70, and Maya incubators. This spare part ensures even temperature and humidity distribution, improving incubation conditions for optimal hatching.
✔ Compatible with Fiem MG50, MG70 and Maya incubators
✔ 5W power and 220V power supply for optimal performance
✔ Ensures constant and effective ventilation
✔ Easy installation and long life
By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.
Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.
Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.
⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.
Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.
📌 Scroll below for compatibility and fitment.
Original Spare Parts for Fiem Incubators : Mesh Lid for Plastic Hatchery Tray suitable for Fiem MG100/150 Incubators, Fiem MG140/200 Incubators. See usage example in second photo.
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
💧 The Smart base is not just a simple base: it is an intelligent humidification system with 4 independent sectors which, combined with the KIT.UM.SMART, guarantees perfect hatching!
At €20.48 (excluding VAT) , this plastic base (part no. 4 in the exploded view) is the heart of your Smart incubator's humidity control. Its four separate sectors allow you to precisely adjust the humidity: one sector for basic incubation, two for medium humidity, and all four for 62% hatching.
🎯 Expert advice: always pair the base with the KIT.UM.SMART (component no. 15 - €26.50) for optimal automatic humidification. The base + kit combination eliminates manual water management and maintains consistent levels, dramatically improving hatching rates. After 45 years in the industry, I can assure you that this combo really makes a difference!
📊 As the FIEM manual indicates, correct humidity is crucial: 47-52% for incubation, 62% for hatching. The four compartments of the base, especially when integrated with the automatic kit, give you the precise control that separates professionals from amateurs.
⚠️ When should you replace it? If you notice cracks with water leaks, if the seals are no longer sealed, or if the plastic is warped from heat.
✅ Compatible only with Smart and prepared for KIT.UM.SMART. CipCip uses a different system with separate trays.
📱 Want to optimize your incubator? Contact us on WhatsApp for advice on the base + humidity kit.
🚚 Ships from Como in 1 business day. No minimum order for this item. FIEM since 1975 , Padovan Avicoltura always has base and humidity kits available. 24-month warranty for private individuals, 12 VAT numbers.
COMPACT FAN DIAM.250 ASP (MG300/316)
The protective net for the Fiem Cip Cip 28 incubator fan is a crucial accessory for ensuring safety and optimal performance. Designed to protect the fan from dust, feathers, and debris , it prevents possible obstructions that could compromise proper air circulation. Made of resistant and durable material , it ensures a constant flow of air, improving the uniform distribution of temperature and humidity within the incubator. Its simple installation keeps the fan efficient for longer , reducing wear and maintenance. Buy now at Padovan Avicoltura and ensure maximum performance for your incubator! (PART.N-2)
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions, please contact us via WhatsApp:
When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.
Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.
Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.
Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.
💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.
Compatibility: Universal - works with any forced-air or still-air incubator
📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.
FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK
200W nickel-chrome heating element (Fiem original spare parts)
Italiano
Deutsch
Español
Français
