80mm Diameter Fan for Fiem Smart and Easy / Fan Motor mm80

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem Spare Parts : 3P+T Power Connector Female + Male MG50

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts. 40 years of experience at your service.

The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).

Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).

✅ It is perfect for those who want:

• Advanced temperature management (dual settings and time slots)
• Complete automation with error reduction
• Digital remote control via WiFi app
• 8 preset programs for poultry species

🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.

⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc

The 5W-34 220V fan motor is an essential component for ensuring uniform air circulation inside Fiem MG50, MG70, and Maya incubators. This spare part ensures even temperature and humidity distribution, improving incubation conditions for optimal hatching.

✔ Compatible with Fiem MG50, MG70 and Maya incubators
✔ 5W power and 220V power supply for optimal performance
✔ Ensures constant and effective ventilation
✔ Easy installation and long life

By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator

Original Spare Parts from Padovan Avicoltura: Hygrometer Bottle, Original Fiem Spare Part

ABS CO2 EXPULSION DAMPER Original Fiem spare parts (MG 50-70-100-140-200)

A customer from Rovigo called me: "The Limpia humidifier is constantly turning on and off, the humidity fluctuates, and the pheasant eggs are drying out." The IEC socket on the panel had oxidized contacts and was making poor contact. Simply moving the cable would shut off the humidifier. I replaced the socket, and it's been working perfectly for 18 months.

When is it needed? If the humidifier doesn't turn on even when plugged in , it turns on and off intermittently, or you see sparks when you plug it in. If the socket has burnt plastic or oxidized contacts, it should be replaced immediately to avoid a fire risk.

What is an IEC socket? It's an international standard (type C14 female)—the same connector found on PCs, monitors, and professional appliances. It guarantees safe connections up to 250V and 10A.

⚠️ Before ordering: Unplug everything, visually inspect the socket (are the contacts shiny or oxidized/black?), test the IEC cable on another device to rule out the cable as the problem.

📸 Not sure? Send us a photo of the IEC socket (focus on the inside) on WhatsApp and describe the symptoms.

Installation: 230V electrical work – Qualified technicians ONLY . If you're not an electrician, hire a professional.

💰 Price: €1.47 – FIEM WAREHOUSE COMO

Compatibility: FIEM Limpia humidifier and other FIEM devices with standard IEC connection.

Minimum order €20: Complete with 5L tank (€8.82) + Tube (€1.89/m) + Bushing (€0.84) + Float (€5.04).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

FLOAT VALVE MOD. C HORIZONTAL WATER INLET FOR INCUBATOR TANK

Spare Parts and Exotic Options Fiem Wet Bulb Hygrometer for Humidity Reading complete with: clip + wick + bottle + support

Padovan Poultry Farming 360° Service

90th Professional Consulting Pre-sale for a targeted purchase.

180° Specialist Post-Sales Consultancy for correct use.

360° Spare Parts Assistance to keep your purchase running efficiently.

Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Incubation and hatching drawer + adjustable inserts for Fiem MG50 incubator without egg turner.

Capacity approximately 50 chicken eggs, 67 pheasant eggs, 80 red-legged partridge eggs, 96 grey partridge eggs, 96 quail eggs, 40 turkey eggs and 20/25 goose eggs

Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.

Trust Padovan Avicoltura, 40 years of experience at your service.

See reviews from other breeders by clicking HERE REVIEWS

EGG TURNING TROLLEY (MG50) + ADJUSTABLE INSERTS

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.

When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.

💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).

Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Mesh door for Fiem artificial breeder

Original Fiem Spare Parts from Padovan Avicoltura : Plate for 72 Professional Hen Eggs for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS