⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!
At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.
🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!
⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.
💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!
✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.
📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.
🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Replace the membrane when: the keys do not respond even when pressed hard, some keys work, others do not, the surface is worn or illegible, there are cuts/tears/holes, the adhesive is peeling off, liquid seepage under the membrane, after years of intensive use to restore sensitivity.
If the keys aren't responding: gently clean with a damp (not wet!) cloth, press firmly in the center of the key, and check that the display is on. If the problem persists, the membrane needs to be replaced.
| Code | DIG KEY MEMBER |
| Description | KEYBOARD PANEL |
| Compatibility | Smart Digital Thermostat |
| Keys present | SET, Up Arrow, Down Arrow |
| Controlled functions | Temperature, Humidity, Calibration |
| Price | €2.80 excluding VAT |
Always unplug the power cord! Carefully remove the old membrane. Clean the surface thoroughly with alcohol. Remove the adhesive backing from the new membrane. Apply starting from one side, avoiding air bubbles. Press firmly over the entire surface. Reconnect and test all the keys.
Add: 05/A Thermometer (€22.05) already exceeds the minimum, 17A Clip (€0.53) , F/SMART Faceplate (€7.50) , P67 Cable Gland (€0.63) . Or get more spare membranes.
Required to cover: component sourcing, testing, anti-static packaging for electronics, order management, tracked shipping.
Is it compatible with analog thermostat?
No, only for the digital version with display.
Can I clean it instead of replacing it?
You can try, but often the problem is wear on the internal contacts.
Difficult to install?
No, it's a sticker. Important: clean surface and no bubbles.
How long does it last on average?
2-3 years with normal use, less if you press the keys frequently.
© 2025 Padovan Avicoltura. FIEM Distributor. Verified data. Prices exclude VAT, 24-month warranty for private individuals/12 VAT numbers.
42.5x41cm stainless steel pollen drying tray with stainless steel mesh for Fiem bee incubators. Top quality for your beekeeping.
Fiem Exotic Spare Parts and Options Electromechanical Maximum Temperature Alarm
New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).
Spare Parts and Exotic Options Fiem 12/230v power supply for Jolly and transport nest
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.
Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.
Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.
⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.
Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
Original Fiem spare parts from Padovan Avicoltura : Digital thermostat for Fiem Smart incubator + sensor. Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
🌀 The fan is not an optional extra: it is the incubator's lung that evenly distributes heat and oxygen, determining the life or death of the embryos!
At €32.03 (excluding VAT) , the 80mm diameter UF80B23STH fan is the heart of the ventilation system in Smart and Easy incubators. Without its constant action, you would have lethal hot and cold zones, a disaster for hatching!
💨 This specific FIEM fan ensures optimal air circulation, designed for the size of the incubation chamber. Warm air is evenly distributed, fresh oxygen reaches each egg, and CO2 is expelled. It's this constant ventilation that keeps embryos alive!
⚠️ When should you replace it? If it makes unusual noises (worn bearings), if it turns slower than normal, if it stops intermittently, if the blades are dirty or damaged, or if it loses efficiency after years of continuous use.
💡 A malfunctioning ventilator causes: embryonic mortality due to asphyxiation, irregular development, dead zones in the incubator, drastically reduced hatching rates.
✅ Compatible with Smart and Easy as specified in the FIEM price list.
📱 Is your fan making a noise or not spinning properly? Send us a WhatsApp video for immediate diagnosis.
🚚 Secure shipping from Como in 1 day. No minimum order for this item. FIEM since 1975 , vital components for professional results. 24-month warranty for private individuals, 12 VAT numbers.
Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Spare Parts and Exotic Options Fiem Wet Bulb Hygrometer for Humidity Reading complete with: clip + wick + bottle + support
Padovan Poultry Farming 360° Service
90th Professional Consulting Pre-sale for a targeted purchase.
180° Specialist Post-Sales Consultancy for correct use.
360° Spare Parts Assistance to keep your purchase running efficiently.
Original Fiem Spare Parts : Pheasant Incubation Basket, 38x35 cm
Suitable for Fiem MG200 incubator.
The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).
Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.
See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).
A customer from Vicenza called me worried: he could hear a metallic rattling noise from his CIP CIP 40 incubator on the 12th day of incubating pheasant eggs. After checking, we discovered that one of the fan's metal supports had come loose. Once fixed, the machine went silent again, and the hatching was successful.
When are they needed? If you hear abnormal vibrations, metallic noises, or rattling coming from the fan compartment, or if you notice that the fan isn't perfectly centered, the bearings probably need replacing. Even during preventative maintenance , when you replace the fan motor, it's good practice to check the condition of the bearings.
⚠️ Before ordering: Unplug the fan, open the control panel, and visually inspect the brackets for damage, rust, or missing parts. Sometimes, a thorough cleaning of the fan is enough to eliminate the noise.
📸 Not sure? Send us a photo on WhatsApp (incubator open, fan visible): we'll help you determine if the supports are the problem or if there's something else.
📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private customers / 12 months for VAT number. Since 1975, FIEM has been synonymous with reliability in the poultry sector.
A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.
When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.
💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).
Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Spare Parts and Exotic Options Fiem set of cylindrical inserts (10 pcs.) egg voltage + aluminum trolley MG50 COLIBRI
The new professional and versatile incubation and hatching tray for the MG50 BIRD/COLIBRÌ incubators is specifically designed for incubating exotic and ornamental animal eggs and, thanks to its removable and adjustable segments, can accommodate eggs of a wide variety of sizes. Also available in a professional version.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Italiano
Deutsch
Español
Français
