Plato carries 96 EGGS OF GUINEA FOWL PHAGGIANA Professional Fiem Victoria

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

🔗 The lock that holds the entire incubator together.
The GACOS is the hook with a threaded insert that connects the lower shell to the upper shell. If it breaks or loosens, the two shells will no longer seal properly, and you lose heat and moisture.

Quick diagnosis: shells that do not engage, broken or bent hook, stripped threaded insert, closure that does not hold.

Solution: Original FIEM GACOS for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Treviso with a COSMO EVO had a car that wouldn't close properly and was losing heat. He thought it was an electrical problem, but it was just a broken GACOS. It was replaced in 2 minutes, and the problem was solved for less than 3 euros.

⚠️ When to replace: If the two shells no longer fit securely or you notice any play between the parts, check the GACOS immediately. An imperfect seal disperses heat and moisture.

Essential data:
💶 Price: €2.84 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: GACOS
📋 Exploded view ref.: n. 6
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.

Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.

Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.

⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.

Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📡 The digital sentinel that monitors every percentage point of humidity.
When the sensor is faulty, the control unit no longer detects humidity correctly, causing disastrous hatching due to dehydration or drowning of the embryos.

Quick diagnosis: Display showing incorrect values (stuck at 0% or 99%), humidity not responding to real changes, unstable readings that constantly jump. It's often thought to be the control unit, but the culprit is actually the sensor.

Solution: Original FIEM SHT31 humidity sensor complete with circuit board and protective case. Accuracy ±2%, fast response. Lifespan: 5–7 years in normal use.

📋 Exploded view ref.: n. 14

📌 Real case: Bologna breeder with INCA, sensor stuck at 45%. Actual humidity was 70%, chicks drowned in their shells. Sensor replaced, readings accurate, and hatchability returned to 85%.

⚠️ When to replace it: at the first signs of incorrect readings. Waiting means losing entire broods due to incorrect parameters.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: FIEM incubators with older, non-Advanced ML/LCD control units
🏷️ Code: SHT31 (OLD)
📋 Exploded view ref.: n. 14
📦 Contents: Electronic board + protective case
🎯 Accuracy: ±2% RH
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Have questions about compatibility? Send a photo of the control unit to WhatsApp: 351 881 9586