Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Bipolar Switch
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Original spare parts for Fiem incubators from Padovan Avicoltura : 500 W armored heating element - (MG800H). Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Original Fiem Spare Parts from Padovan Avicoltura : Plate for 170 eggs, professional quail and partridge for Fiem incubators, astral series MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and VICTORIA SERIES
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.
See other breeders' reviews by clicking HERE BREEDERS' OPINIONS
Spare Parts and Exotic Options Fiem Timer Light Programming + Twilight Sensor
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🚪 The invisible pin that holds everything in place.
Hinges are the small hinges that allow the transparent door to open and close properly. They seem insignificant, but if they break or become loose, the door won't close properly, and you lose heat and humidity.
Quick diagnosis: door that doesn't close properly, excessive play, broken or bent hinge, door that "falls" to one side.
Solution: Original FIEM door hinge for COSMO, COSMO EVO, and COSMO ML incubators. Price each.
📌 Real case: A customer in Bari with COSMO ML had a door that wouldn't close properly. He thought the door needed replacing, but it was just a broken hinge. Replaced in 5 minutes for less than 2 euros, problem solved.
⚠️ When to replace it: If the door no longer closes properly or you notice excessive play, check the hinges immediately. Improper closure causes heat and humidity to escape, compromising hatching.
Essential data:
💶 Price: €1.47 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: HINGES COS.
📋 Exploded view ref.: n. 3
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
💬 Minimum order €20 (VAT included)
For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.
Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.
📌 Scroll below for full compatibility, fitment, and related parts.
Original Spare Parts for Fiem Incubators : Mesh Lid for Plastic Hatchery Tray suitable for Fiem MG100/150 Incubators, Fiem MG140/200 Incubators. See usage example in second photo.
Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.
Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.
Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.
⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.
Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
⌨️ The keyboard membrane is not just a sticker: it is the interface between you and the electronic brain of your incubator, allowing you to precisely control temperature and humidity!
At just €2.80 (excluding VAT) , the MEMB.TAST.DIG membrane is the touch control panel for the Smart digital thermostat. This thin film with printed buttons is what allows you to set the vital parameters: temperature at 100°F, humidity at 47-62%, and sensor calibration.
🎯 As specified in the FIEM manual, pressing the SET buttons accesses the reference values, and using the up/down arrow keys changes the temperature and humidity. Without a functioning membrane, you cannot control the digital incubator!
⚠️ When should you replace it? If the keys no longer respond to pressure, if the surface is worn and the symbols are no longer legible, if it has cuts or tears, if the adhesive has peeled off the panel, or if liquids have penetrated the contacts.
💡 A common problem: after years of use, the membrane loses sensitivity. Press SET but nothing happens. Before you think the entire thermostat is broken, often all you need to do is replace this inexpensive membrane!
✅ Compatible only with Smart Digital Thermostats . Make sure you have the model with a 3-digit digital display.
📱 Is your thermostat no longer responding? Send us photos of the control panel on WhatsApp and we'll confirm if the membrane is sufficient.
🚚 Ships from Como in 1 day. Minimum order €20 - add thermometer, clips, or other useful spare parts. FIEM since 1975 , Padovan Avicoltura always has membranes and digital components in stock. 24-month warranty for private individuals, 12 VAT numbers.
🛡️ Two vital functions in one piece: protecting the electrical terminals and holding the thermometer. The terminal cover is not just a cover, but an essential multifunctional component!
At just €1.90 (excluding VAT) , this component of the Smart model plays a fundamental role in two ways. As you can see in the exploded view (component no. 3), the MORS. cover protects the electrical terminals from humidity and accidental contact, but also serves as a support base for the 17A clip where the 05/A thermometer is inserted.
⚡ This dual function makes it critical: without it, you not only risk short circuits due to the exposed terminals, but you also lose the anchoring point for the temperature reading system. The incubator's constant humidity can seep into the exposed electrical connections, causing malfunctions or worse.
🔧 When should you replace it? If it's cracked or broken, if it's no longer securely attached, if the thermometer clip is no longer securely attached, or if you see signs of overheating on the plastic. A damaged casing compromises both electrical safety and the accuracy of temperature readings.
⚠️ Installation requires care: always unplug the unit before working on electrical parts! The cover is placed over the terminals and snapped on, making sure the thermometer clip seat is properly aligned.
✅ Compatible only with the Smart model (not for use with CipCip, which has a different structure). Given its critical dual function and low price, it's wise to keep a spare in the drawer.
📱 Not sure which part you're interested in? Send us photos of the incubator, the current housing, and the terminal area on WhatsApp . We'll confirm compatibility and availability promptly.
🚚 Ships from Como in 1 business day, delivery 2-4 days. Minimum order €20. FIEM since 1975 , Padovan Avicoltura always has the entire range of spare parts. 24-month warranty for private individuals, 12 months for VAT number.
Ultrasonic humidifier with 3 membranes. It is immersed in the incubator's humidity tray and creates a very fine mist. Thanks to the special socket provided in the incubator/hatcher, the system automatically activates when needed. Perfect for MG 316, MG 400, MG 800, MG 1150 hatchers and SEROIE MAXI PRO incubators.
Optimize bee incubation with the mesh shelf and stainless steel frame for the Fiem A-100/A-140 incubator. High quality and durability for your beekeeping.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Original Fiem spare parts from Padovan Avicoltura : Digital thermostat for Fiem Smart incubator + sensor. Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.
A customer from Vicenza called me worried: he could hear a metallic rattling noise from his CIP CIP 40 incubator on the 12th day of incubating pheasant eggs. After checking, we discovered that one of the fan's metal supports had come loose. Once fixed, the machine went silent again, and the hatching was successful.
When are they needed? If you hear abnormal vibrations, metallic noises, or rattling coming from the fan compartment, or if you notice that the fan isn't perfectly centered, the bearings probably need replacing. Even during preventative maintenance , when you replace the fan motor, it's good practice to check the condition of the bearings.
⚠️ Before ordering: Unplug the fan, open the control panel, and visually inspect the brackets for damage, rust, or missing parts. Sometimes, a thorough cleaning of the fan is enough to eliminate the noise.
📸 Not sure? Send us a photo on WhatsApp (incubator open, fan visible): we'll help you determine if the supports are the problem or if there's something else.
📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private customers / 12 months for VAT number. Since 1975, FIEM has been synonymous with reliability in the poultry sector.
The FIEM EVO PLUS Control Unit is the perfect choice for those who want maximum control over incubation. Its 2.4" color display with multilingual graphic menu makes management intuitive and modern, while the advanced microprocessor and self-calibrating digital probe ensure constant precision (±0.1°C and ±1.5% RH).
Ideal for professional breeders: It allows you to set preset or customized programs, manage specific phases such as hatching and germination, and control every parameter even remotely thanks to the optional WiFi module (available from 2025).
✅ It is perfect for those who want:
🔎 What customers say: Online reviews praise the accuracy, ease of use, and versatility, especially for complex and professional incubations. The ability to customize each parameter to your needs is also highly appreciated.
⚠️ Reported criticisms: Some users report that to upgrade from previous control units (e.g. Mini LED) it is necessary to rewire the inc
The door locking clips are an essential component for ensuring a perfect seal on the door of Fiem incubators . Designed to provide a secure and stable lock , they prevent heat and humidity loss, helping to maintain ideal incubation conditions.
✔ Compatible with various Fiem incubators
✔ Lever lock for stable and secure fastening
✔ Easy installation and long life
✔ Durable materials for long-lasting use
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Fiem temperature probe for ELPT2 thermostat: precise temperature measurement for correct incubation.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Italiano
Deutsch
Español
Français
