Quail Incubation Basket INCUBATION BASKET cm 43x58 (MG320 Maxi Pro)

Complete tank with floating group for artificial breeder

One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

A customer from Bassano del Grappa wrote to me: "The quail eggs are drying out, the chicks can't hatch." Checking the photos, the trays were too small (not original). I replaced both with original FIEM 350 TOP trays, and the next hatching went perfectly.

When is it needed? If the tray is cracked, leaking, warped , or too hardened to be cleaned, it should be replaced. The CIP CIP 28 uses two trays : normally one for incubation and both for hatching.

💰 Price: €1.30 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This tray is specific for CIP CIP 28. The CIP CIP 40 model uses the 2-compartment channel.

Minimum order €20: Consider getting at least 2 trays + other spare parts (thermometer €22.05, heating element €12.18) to complete.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Original Fiem spare parts from Padovan Avicoltura : Prismatic °F hygrometer for Fiem incubators

Original Fiem spare parts from Padovan Avicoltura : Complete Digital Thermostat DIG1 Fiem spare parts. We rely exclusively on original spare parts from the manufacturers of each product, so you don't have to resort to non-original parts that could compromise the proper functioning of your product and consequently cause irreparable damage and risks to your safety.

The 38x35 cm metal hatching tray is designed for the incubation and hatching section of the Fiem MG70/100 incubators, and for the incubation section of the MG100/150 and MG140/200 incubators . Thanks to its sturdy structure, it is ideal for handling large quantities of eggs, ensuring an optimal environment for hatching. Approximate capacity: 45 chicken eggs, 50 pheasant eggs, 150 red-legged partridge eggs, 150 grey partridge eggs, 150 quail eggs, 40 turkey eggs, 12 goose eggs .

✔ Compatible with Fiem MG70/100/150/140/200 incubators
✔ High capacity for different types of eggs
✔ Metal construction for strength and durability
✔ Easy to install and clean

For the hatching department of MG100/150 and MG140/200, purchase the 38x45 cm model (code 38) for older incubators, or the plastic model (cass.plast100-) for incubators from 2020 onwards.

⚠ If placed on the first floor at the top, add the lid (code 207/2) .

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

A pheasant farmer from Vicenza wrote to me: "I have an old MG70 without integrated humidity control. With the hair hygrometer installed, I can finally monitor humidity throughout the cycle. Hatching has improved significantly since I started monitoring this parameter."

When is it needed? For incubators without a built-in hygrometer , as a visual check in addition to the control unit sensor, for continuous monitoring without replacing batteries. The dimensions are designed for the MG and Astrale series holes.

How it works: The hair hygrometer exploits the property of hair (natural or synthetic) to stretch as humidity increases. A system of levers transmits this variation to a hand with a graduated scale in %RH. It requires no electrical power.

Comparison with a wet bulb hygrometer: A hair hygrometer is easier to install (just insert it into the hole) and requires no water or sock maintenance. However, it has a slower response (5-25 minutes vs. a few minutes) and lower accuracy (±5% vs. ±3%). The wet bulb is specifically calibrated for 37.8°C, while the hair hygrometer is generic. For precise professional monitoring, we recommend the wet bulb; for practical, maintenance-free monitoring, the hair hygrometer is excellent.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡 More info? Read the description below.

The 2.00 m / 143W 170 OHM/MT silicone heating cable is an essential component for the correct functioning of the Fiem MG50, MG70, MG100, MG140, MG320 incubators. This heating element ensures uniform heat distribution, ensuring a stable incubation environment for optimal embryo development.

✔ Compatible with Fiem MG50, MG70, MG100, MG140, MG320 incubators
✔ Length 2 meters, power 143W, resistance 170 OHM/MT
✔ Even heating for a constant temperature
✔ Silicone construction for high strength and durability

By purchasing this product, you choose original Fiem spare parts , guaranteeing reliability and compatibility with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, send us photos via WhatsApp :

Original Fiem Spare Parts : Incubation basket for quail measuring 38x35 cm.

Capacity approximately 70 quail eggs suitable for Fiem MG70/100 Incubator, Fiem MG 100/150 Incubator, Fiem MG 140/200 Incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to ask for information or clarification directly via WhatsApp? Click WHATSAPP

The 40x40 brass flat hinge is an essential component for the proper functioning of Fiem incubator doors. Made of durable brass , it ensures a secure and long-lasting closure, preventing deformation and wear over time. Ideal for replacing damaged hinges and restoring full functionality to your incubator.

✔ 40x40mm dimensions for perfect compatibility
✔ Corrosion-resistant brass material
✔ Smooth movement for optimal opening and closing
✔ Easy installation with stable fixing

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator

Original Fiem Spare Parts : Incubation basket for quail measuring 38x50 cm.

Capacity approximately 112 quail eggs suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

Only at Padovan Avicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

Want to request information or clarification directly via WhatsApp? Click WHATSAPP

Potentiometer for Fiem breeder Original spare parts

Spare Parts and Exotic Options Fiem Incubation Tray Complete with Inserts and Segments mg50 and Colibri

Mesh door for Fiem artificial breeder