Original Fiem Spare Parts : Single Egg Turning Bar for Fiem MG100/150 Incubator
Trust Padovan Avicoltura: Only Made in Italy incubators and original spare parts.
SECURE PAYMENT METHODS
Cash on delivery, PayPal, credit card, in 3 installments, Satispay, bank transfer, Postepay top-up.
SHIPPING COSTS
Italy offers free shipping on orders over €190. For smaller orders, shipping is €14.70 (place one order per Fiem-Borotto-River brand). European Union shipping is always €30.
Free Consultation
Pre-purchase assistance to help you choose the product best suited to your needs, post-purchase support with usage advice and help finding spare parts.
Con ordini superiori a 190 euro, la spedizione è gratuita! Per importi inferiori, la tariffa fissa di una singola spedizione è solo 14,70 euro.
Egg tray for the FIEM Struzzi series, available in 6 or 8-seater versions.
Original Fiem spare parts : 30x50 cm mesh lid for hatching drawer in the incubation section of the Fiem MG244-316-432-576-720 incubator
To be combined with hatching drawer (code 0087)
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.
See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).
MESH LID cm30X50 HATCHING DRAWER (MG244-316-432-576-720)
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛡️ The protective cap that seals the structure from humidity.
When it is broken or missing, moisture and dirt enter the incubator structure through the air passage holes, damaging it from the inside.
Quick diagnosis: broken or missing bushing, exposed hole allowing moisture to enter, signs of condensation or dirt in the structure. A small but essential component for protection.
Solution: Original FIEM hole cover made of BPA-free plastic. Seals the hole, protecting the structure from infiltrations while maintaining airflow. Lifespan: 10+ years.
⚠️ When to replace it: if it's broken, missing, or if you notice moisture infiltration into the structure.
Essential data:
💶 Price: €1.16 + VAT (each)
🔧 Compatibility: CIP CIP 28 and CIP CIP 40
🏷️ Code: 338574
📏 Material: BPA-free neutral plastic
📦 Availability: IN STOCK – Shipping within 24 hours (railways)
Questions? WhatsApp: 351 881 9586
The MG 70-100-140-200-320 gearmotor is an essential component of the automatic egg rotation system in Fiem incubators. Designed to ensure smooth and constant movement, it ensures optimal incubation management , improving hatching rates.
✔ Compatible with MG 70-100-140-200-320 Fiem incubators
✔ Automatic rotation system for perfect incubation
✔ Durable materials for long life and reliable performance
✔ Easy to install and replace
By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!
Spare parts for Fiem breeders: metal legs
Choose Original Fiem Spare Parts for your livestock breeder's metal legs: they guarantee strength and reliability for long-lasting support. Please check that the required spare part matches the image provided. If you have any questions or are having trouble finding the part you need, please send us a photo of the spare part you need via WhatsApp. Thank you.
✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience
🛏️ The floor that lets the eggs breathe from below.
The COSMO base mesh is the perforated surface on which the eggs rest. It allows warm air and humidity to rise from the trays below, ensuring even distribution throughout the incubation chamber.
Quick diagnosis: rusty netting, broken or loosened meshes, bent or deformed netting, eggs that do not sit securely.
Solution: Original FIEM expanded mesh base for COSMO, COSMO EVO and COSMO ML incubators.
📌 Real case: A customer in Rovigo with a COSMO EVO had a rusty base net after 7 years. The eggs were no longer stable, and some had broken during the hatching process. The net was replaced, no broken eggs, and hatching was normal again.
⚠️ When to replace it: If the mesh is rusty, warped, or has broken links, the eggs will no longer sit securely and may be damaged during turning. It's best to replace it immediately.
Essential data:
💶 Price: €16.59 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: BASE NETWORK COS
📋 Exploded view ref.: n. 8
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)
Questions? WhatsApp: 351 881 9586
📌 Scroll below for full compatibility, fitment, and related parts.
Original Fiem Spare Parts : 3P+T Power Connector Female + Male MG50
Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts. 40 years of experience at your service.
A breeder in Treviso contacted me about a strange noise from his CIP 28 incubator: "It sounds like something is scratching the fan blades." Upon opening the incubator, we found the protective mesh was deformed and touching the fan with each rotation. After replacing the mesh, the problem went away, and incubation continued without a hitch.
When is it needed? If you notice rubbing noises, the mesh probably needs replacing. Even after aggressive cleaning with corrosive products , or if the mesh appears visibly rusted, deformed, or has loosened meshes, it's time to replace it.
⚠️ ATTENTION WHEN ORDERING: There are two versions – always specify whether you need it for CIP CIP 28 or CIP CIP 40 when ordering. The dimensions are different and are not interchangeable.
📸 Not sure which model you have? Send us a photo of the incubator's identification plate (located on the back) on WhatsApp – we'll immediately confirm which network you need.
Installation: Quick and easy. Always unplug before opening. The net is attached with just a few screws; no electrician required.
💰 Price CIP CIP 28 and 40: €10.50 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO
Minimum order €20: Consider adding other maintenance parts (fuse, thermometer, humidity trays) to complete your order and reach the minimum threshold.
📦 Logistics: Ships within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM, leader in artificial incubation since 1975.
A customer in Rovigo was having strange problems: the drain was constantly shifting, water was pouring out of one side, and the humidity was unstable. Upon inspection, the metal support had warped and was no longer holding the tray in place. The support was replaced, and the problem was solved in 5 minutes.
When is it needed? If the channel moves, wobbles, or doesn't stay in place , the metal support is probably warped, bent, or missing. Even when replacing the channel itself, always check the condition of the support.
💰 Price: €5.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO
⚠️ ATTENTION: This support is specific for CIP CIP 40. The CIP CIP 28 model has a different support (SUPP.BAC.CIP28).
Minimum order €20: Add the channel (€6.50), thermometer (€22.05) or other spare parts.
📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.
Original Spare Parts for Fiem Incubators from Padovan Avicoltura : Digital Thermostat 1 + Probe (Fiem Spare Parts) . Only at Padovan Avicoltura will you find an efficient spare parts service guaranteed over time to keep your incubator always in working order, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to get the most out of your incubator.
Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.
The 5W-34 220V fan motor is an essential component for ensuring uniform air circulation inside Fiem MG50, MG70, and Maya incubators. This spare part ensures even temperature and humidity distribution, improving incubation conditions for optimal hatching.
✔ Compatible with Fiem MG50, MG70 and Maya incubators
✔ 5W power and 220V power supply for optimal performance
✔ Ensures constant and effective ventilation
✔ Easy installation and long life
By purchasing this product, you choose original Fiem spare parts , guaranteeing maximum compatibility and excellent performance for your incubator.
ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
POWER SUPPLY 7.0 A-12/220V + cigarette lighter plug (JOLLY25 + PORTABLE NEST): the original spare part for your incubator.
Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.
Original Fiem Spare Parts: Protective Net for Q10 Fan, Fiem MG50 Incubator
Only at Padovan Avicoltura can you find an efficient, long-term spare parts service to keep your incubator running efficiently, as well as an important and appreciated pre-sales and post-sales consultancy service, and user assistance to help you get the most out of your incubator.
Italiano
Deutsch
Español
Français
