Fiem MG50 Junior Special: Accessories and Spare Parts

Original FIEM Spare Parts for the MG50 Junior Special Incubator

Has your FIEM MG50 Junior Special stopped at just the right time? We understand how frustrating it is when your small family incubator isn't working as it should. Whether it's a stuck turning drawer, a damaged thermometer, or a heating element that's no longer heating, we're here to help you get your incubator back up and running quickly. With over 45 years of experience in the poultry industry, we know exactly what replacement part you need for your MG50 model. 💬 Not sure which part is right for you? Contact us on WhatsApp at 📱 +39 3518819586. Send us four photos: the complete incubator, the data plate, the part to be replaced, and a description of the fault. We'll help you identify the correct component.

🔧 Spare Parts for MG50 Junior Special Components

🌡️ Temperature Control

⚡ Before replacing electrical components: turn off → 60 sec → turn on again Many apparent problems with the MINILED thermostat or heating element can be resolved with a simple power reset. Turn off the incubator at the main switch, wait 60 seconds, then turn it back on. If the problem persists after this procedure, proceed with checking or replacing the component.
  • MINILED ADVANCED (Complete control unit with 230V T/H probe) – For precise temperature regulation and humidity readings. Includes self-calibrating temperature/humidity sensor.
  • Thermometer °F (cod. 05/A) – Alcohol thermometer with Fahrenheit scale for visual reading of internal temperature.
  • Plastic thermometer case (code 27) – Transparent thermometer cover, makes cleaning easy and prevents accidental breakage.
  • LCD temperature probe – Digital sensor for MINILED thermostat, ensures accurate reading for automatic heating control.
  • R75H silicone resistor (143W, 2 meters) – Main heating element for incubation temperature maintenance. Highly reliable flexible silicone cable.
  • Resistance ring curl – Metal support for securely fixing the heating element inside the incubator.

🔄 Manual Egg Turning System

  • Complete gearmotor 117/C – Complete gearmotor assembly with metal support, cams, and pin for manual egg turning. Compatible with MG50 only.
  • Gearmotor 117/E (engine with cams and pin only) – Economical version without metal support, for quick engine replacement.
  • Adjustable egg turning grid CAR.MG50 – Metal grid with inserts for horizontal egg positioning, manual activation via drawer.
  • Metal inserts INSERT.MG50 – Individual elements for egg turning grid, allow adaptation to different sized eggs.
  • Galvanized sheet metal drawer 56/1 – Complete egg tray in galvanized sheet metal, for combined incubation and hatching in the MG50.

💡 How the MG50 egg turner works: Pushing the drawer all the way in activates the automatic egg turning mechanism via a gear motor. During the last two days before hatching, slide the drawer back about 1 cm to deactivate the movement and leave the eggs still, or insert it with the handle facing the door.

🔥 Ventilation and Air Conditioning

  • Fan motor 37 (5/13W, 220V single-phase) – Professional fan with self-cooling bearings for uniform air circulation.
  • Aluminum blade Ø 200 mm (code 59) – Aluminum fan blade for MG50, guarantees optimal air flow.
  • Q12 V114D fan protection net – Protective metal grille for safety and protection of fan blades.
  • Adjustable ventilation damper S/11 – Variable closure in ABS for ventilation holes, allows fine adjustment of air exchange.

⚠️ Fan maintenance: Before replacing a noisy fan, try cleaning it with compressed air and lubricating the bearings with specific lubricating oil. Often, the problem can be solved without replacing it.

💧 Natural Humidification System

  • Basin with float BAC.10/45 – Humidification tank with constant water level system, includes integrated red float.
  • Red float 97G – Single component for automatic water level maintenance in the humidification basin.
  • Metal lid for basin code 109 – Cover for regulating evaporation surface, increases or decreases humidity.
  • External tank 0083 (5 litres) – External water reserve tank connectable to a basin for extended autonomy.
  • Rubber hose Ø 10 mm – Pipe for connecting external tank to internal basin (sold by the metre).
  • SHT31 Humidity Sensor – Electronic component for reading relative humidity on MINILED thermostat (board + case).
  • Humidity sensor case – Plastic protection for humidity sensor, mounted on the inside wall of the incubator.

🛠️ Structure and Various Components

  • Complete porthole 96/A – Transparent inspection window with gasket, allows internal inspection without opening the door.
  • Hinge 204 – Pair of metal hinges for fixing the incubator door.
  • Door lock clip 2.03.00.04/6 – Metal hooks for hermetic door closure.
  • S.P. door support – Internal metal reinforcement for door support and alignment.
  • Monofoam gasket 240 (3 mm thick, sold by the metre) – Door perimeter insulation for optimal thermal insulation.
  • V284 support feet – Adjustable plastic feet for leveling the incubator on a support surface.

⚡ Electronics and Wiring

  • RL 34 single-pole switch – On/off control for LCD thermostat or lighting.
  • 3P+T CON4 angular connector – Male socket for connecting electrical components with grounding.
  • SCHUCKO power cord – Main power cable for connecting the incubator to the 220-240V mains.
  • IEC cable for automatic humidification – Power cable for connecting external ultrasonic humidifier (optional).
  • IEC panel socket – Standard connector for powering humidifiers or external accessories.
  • ITWHK52001 Fuse Holder – 2A fuse protection box for incubator electrical circuit.
  • Fuse 2A CF521220 – 2 Amp replacement fuse for electrical overload protection.
  • FIEM-COP.SC14 plastic cover for electrical panel – ABS protection for control unit and electrical components.
  • REISTPG16 cable gland – Skintop cable gland for cable entry into the electrical panel, IP protected seal.
  • Plastic bushing BOCC.148662 (UB-1500) – Ultrasonic humidification tube input for external nebulizer connection.

⭐ Top Spare Parts for the MG50 Junior Special – Quick Reference List

ComponentFIEM CodeWhen to Replace
Complete egg turning gearmotor117/CAbnormal noise, drawer does not move, egg turner blocked
°F Thermometer with Case05/A + 27Fragmented alcohol meter, inaccurate reading, broken case
143W silicone resistanceR75HIncubator does not heat, insufficient temperature, broken heating element
Basin with floatBAC.10/45Water leaks, inconsistent level, stuck float, limescale
Single red float97GIrregular humidity, overflowing or insufficient water
Egg turning grid with insertsCAR.MG50Grid deformation, missing inserts, mechanical wear
Galvanized sheet metal drawer56/1Rust, deformation, difficulty inserting/removing
5/13W fan motor37Fan stopped, excessive noise, engine overheating
Complete MINILED control unitMINILED ADVANCEDDisplay not working, probe error, thermostat not regulating
4W E14 LED bulbLED 4W230 LAMPInterior light does not turn on (after checking the switch)
Full porthole96/ACloudy plastic, cracks, deteriorated seal
Door seal (per meter)240Heat loss, insufficient humidity, compressed seal

✅ Why Choose Original FIEM Spare Parts for the MG50 Junior Special

🎯 Specifically designed for MG50
Each spare part is custom-developed for this family model with manual drawer egg turner.

🎛️ Electrical compatibility verified
The MG50 electrical components operate at 220-240 V ~ 50-60 Hz with a total power of 185 W. The 143 W R75H resistor is sized for this specific absorption, ensuring uniform heating without overloading. The MINILED thermostat manages temperatures from 20°C to 45°C with decimal precision, ideal for family incubation that requires a constant 38.3°C (101°F).

💪 Durability tested in real-world conditions
FIEM has been manufacturing incubators since 1975, backed by 50 years of field testing. The self-cooling bearings of the 37 fan motor withstand continuous cycles of 21-35 days, the 97G red float maintains precision even in hard water, and the 56/1 galvanized sheet metal drawer withstands high humidity without oxidation. Components tested over thousands of real-world incubation cycles on farms.

🛡️ Compliance with applicable CE regulations
Where required by the Machinery Directive 2006/42/EC and subsequent amendments, electrical spare parts comply with harmonized standards EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3. The wiring includes mandatory earthing, a 2A fuse for overload protection, and insulating materials certified for operating temperatures up to 45°C.

👨‍🔧 Specialized MG50 technical support
By purchasing original spare parts, you have access to FIEM technical support, which knows every detail of your model. We'll guide you via WhatsApp to identify the fault (e.g., distinguishing the gear motor from the thermostat).

📅 Extended spare parts availability
FIEM keeps MG50 spare parts available for several years after production, ensuring that you can repair your family incubator even after a long time.

📦 Shipping and Support for Spare Parts for the MG50 Junior Special

🚚 FIEM Guanzate Shipping
All spare parts are shipped exclusively from the FIEM factory in Guanzate, in the province of Como, via tracked courier. Typical delivery times are 2-4 business days in Italy. You will receive a shipping notification with a tracking code to monitor your package in real time. Professional shockproof packaging protects delicate components such as thermometers, portholes, and electronic control units during transport.

🔒 12/24 month warranty + DDT
Original FIEM spare parts are covered by a warranty against manufacturing defects: 12 months for VAT-registered customers, 24 months for private customers from the invoice date. Please retain the FIEM transport document as an official warranty document. Excluded from the warranty: normal wear and tear (gaskets, bulbs), damage from incorrect installation or improper use, and tampered components.

💬 Minimum Order: Transparency on Logistics Costs

To ensure the quality of our MG50 spare parts service, we apply a minimum order of €20 (excluding shipping). This threshold covers actual operating costs:

  • Search and collection time for the specific component from the FIEM Guanzate warehouse (catalogued spare parts for 15+ incubator models)
  • Cost and time for professional shockproof packaging (shaped box, bubble wrap, corner protection for fragile components)
  • Order management, invoice issuance, and tax documents compliant with Italian law
  • Organizing collection and notification to the tracked courier with delivery confirmation

💡 Practical advice: If you need to replace a small component (e.g., a 2A fuse for €0.42), take the opportunity to also order useful spare materials.

🧰 Best Practices for Maintenance of Spare Parts for the MG50 Junior Special

  • 🌡️ Check the thermometer before each cycle – Check that the alcohol column is intact and free of fragments. If you see even the slightest fragmentation, the thermometer is unreliable. Always store the thermometer upright at 10-30°C when the incubator is not in use.
  • 💧 Floating cleaning every 3 cycles – After every third incubation cycle, place a solution of water + 30% white vinegar in the BAC.10/45 basin for 2-3 hours. Then remove the red float 97G, rinse it thoroughly, and reassemble it, checking that it moves freely. This prevents limescale blockages and sudden water leaks.
  • 🔄 Lubricate the gear motor annually – Once a year, apply 2-3 drops of specific lubricating oil to the bearings of the 117/C gearmotor. Manually activate the drawer to distribute the lubricant. This reduces noise and extends the life of the most stressed mechanical component of the MG50.
  • 🔥 Cleaning the fan with compressed air – Before replacing a noisy fan, turn off the incubator and blow compressed air on the blades and in the Q12 grill. This removes dust buildup that causes imbalances and noise. If the noise persists after cleaning, replace motor 37.
  • ⚡ MINILED thermostat test with reset – If the temperature fluctuates or the display shows "ERR," before ordering the MINILED control unit, try a power reset: turn off → 60 seconds → turn back on. Many temporary malfunctions are resolved this way. If the error persists, check the probe or replace the control unit.

💼 Practical case from the field: A breeder in Treviso contacted us about an MG50 that wasn't maintaining a stable temperature. Instead of immediately replacing the heating element or thermostat, we suggested checking the door gasket (code 240). It had compressed after 5 years of use, causing heat loss. We replaced 2 meters of monofoam gasket (cost €5.68), and the temperature stabilized perfectly. We saved €150 on unnecessary electrical spare parts.

❓ Frequently Asked Questions about MG50 Junior Special Spare Parts

The egg turning drawer on my MG50 no longer moves. Do I need to replace the 117/C gear motor?
Not necessarily. First check: 1) Drawer fully inserted (activates gearmotor), 2) No obstacles blocking drawer movement, 3) Try an electrical reset (turn off → 60 seconds → turn back on). If after these checks the drawer remains stationary, then yes, the 117/C gearmotor needs to be replaced. Often, the problem is simply a misaligned drawer that is not engaging the activation pin.

The MG50 fan is making noise. Can I fix it or do I need to replace motor 37?
Try the repair first: turn off the incubator, remove the Q12 protection mesh, blow compressed air on the blades and bearings, and apply 2-3 drops of lubricating oil to the bearings. Reassemble and test. If the noise persists or the fan vibrates, replace the entire 37 motor. Do not attempt internal repairs to the motor (worn bearings cannot be replaced individually).

💬 Not sure which spare part is right for your FIEM MG50 Junior Special?

Write us on WhatsApp at 📱 +39 3518819586. Please send us four photos: the complete incubator, the data plate (with model and serial number), the part to be replaced, and a description of the fault or malfunction.

Our specialized FIEM technical team will respond within a few hours with: exact spare part identification, component code, updated price, Guanzate warehouse availability check, and delivery times. If the problem can be solved without replacing the part, we'll let you know immediately with a free troubleshooting procedure.

Sources: FIEM New Generation MG 2025 catalog, pages 2-3 (MG50 Junior Special technical specifications, egg capacity, manual egg turning specifications); MG50/MG70/MG100 2025 user manual, pages 1-9 (operating procedures, operating temperature 101°F/38.3°C, MINILED calibration, troubleshooting); FIEM MG50 2025 spare parts list with photographed codes (36 components verified, updated prices); Padovan Avicoltura customer service operating experience 2020-2025.

Active filters

Egg Turning Gear Motor for Fiem Smart, Cosmo,...

€53.68
Availability: 198 In Stock

The single egg turning gearmotor is a key component of the egg turning system in Fiem Smart, Cosmo, Inca, Cip Cip, and MG50 incubators. Designed to ensure smooth, consistent movement of the egg trays, it helps maintain optimal conditions for embryo development, preventing them from sticking to the eggshell.
Made of high-quality materials, it ensures reliable operation and a long lifespan. Installation is simple and guarantees maximum compatibility with the models listed.
By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

Power Cable for Automatic Humidification of...

€14.23
Availability: 1000 In Stock

🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

Fiem CIP Semi-Automatic Red Moisture Float CIP...

€6.15
Availability: 994 In Stock
Red Water Float for Fiem Semi-Automatic Humidity Systems CIP 40-MG50-MG70-MG100-MG140-MG200-MG320 The automatic water level controller. This float regulates the flow of water into the humidity trays, maintaining the optimal level without manual intervention during incubation.

When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

5 lt water tank for Fiem semi-automatic...

€10.76
Availability: 998 In Stock
5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Semi-automatic Humidity System Connection Tube...

€2.31
Availability: 998 In Stock
Semi-Automatic Humidity System Connection Tube – The vital link between the external tank and the incubator. This food-grade PVC tube transports water from the tank to the trays, ensuring constant humidity without manual intervention.

A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

Universal Compatibility:

Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Single-Pole Switch for Fiem Control Unit -...

€0.65
Availability: 1000 In Stock
RL 34 Single-Pole Switch for FIEM Control Units – The on/off switch for control units. This switch allows you to manually turn the control unit on and off, ensuring direct control over the system's power supply.

A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: FIEM control units (MiniLED, Advanced and digital models).

Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

UB-1500 Plastic Bushing for Fiem Ultrasonic...

€1.02
Availability: 1000 In Stock
FIEM UB-1500 Plastic Bushing for Humidity System Pipe Inlet – A safe passage for the water pipe. This plastic bushing fits into the incubator's hole, allowing the humidity system pipe to pass from the outside to the inside, protecting the pipe from wear and ensuring a proper seal.

When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Adjustable Rotating Grid for Inserts for Fiem...

€20.24
Availability: 1000 In Stock

Adjustable Rotating Grid 173 for FIEM Cip Cip 28-40 MG50 Incubators (please specify the model it should be attached to when ordering) – The heart of the automatic turning system. This adjustable insert holder allows you to incubate eggs of different sizes (hen, pheasant, quail) by rotating them as a hen does in nature.

When is it needed? If the grid is warped, broken, no longer rotates properly , or the inserts no longer fit securely. Even if it's completely missing (used incubator without grid).

💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: CIP CIP 28, CIP CIP 40, MG 50

Minimum order €20: Consider adding missing or worn inserts for a complete kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Plastic Cams for Fiem Smart, Easy, Cip, Inca,...

€1.93
Availability: 1000 In Stock
SMART/EASY/CIP/INCA/COSMO Gear Motor Cams / Plastic Joint for Turning Motor – The connecting component between the electric motor and the egg turning grid. This plastic joint transmits the motor's rotary motion to the grid, allowing the eggs to turn automatically.

A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.

When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.

Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam

💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.

Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.

⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).

Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Temperature Probe for Old Fiem LCD Control Unit

€16.72
Availability: 1000 In Stock
LCD Thermostat Temperature Sensor (old) – The sensor that detects the incubator's internal temperature and allows the LCD thermostat to regulate the heating. This critical component constantly transmits temperature data to the thermostat to maintain the incubator at 37.5-37.7°C.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Fiem Mini LED Advanced control unit with...

€214.72
Availability: 1000 In Stock
The MINILED ADVANCED is the standard digital control unit installed on many FIEM incubators. It is designed to ensure precise automatic temperature and humidity control, thanks to an intuitive LED system and self-calibrating sensors. It represents an evolution of the previous Mini LED model, improving efficiency, precision, and ease of use.

The FIEM Advanced Mini LED Control Unit is the perfect digital heart for those seeking precision, simplicity, and reliability in incubation. The self-calibrating digital sensor ensures accurate readings within ±0.1°C and ±1.5% RH, ensuring ideal conditions for hatching.

It is the ideal choice for hobbyists, small breeders, beekeepers and enthusiasts who want to improve their success rates without technical complications.

Why choose it?

  • Ease of use even for beginners
  • Reliable digital control
  • Compatibility with mid-range FIEM incubators

What customers say: Users praise its intuitive operation, precise climate control, and solid construction. One customer writes: "I use it on an MG50: precise, quiet, and reliable." Reviews on forums and e-commerce sites confirm its high popularity among breeders.

FIEM COMO WAREHOUSE – Only original FIEM spare parts to ensure the long-term efficiency of your incubator.

Compatibility: CIP CIP 28/40, MG50, MG70, MG100, API Series

Includes: Complete control unit + T/H (temperature/humidity) probe 230V

👉 Perfect for those looking for a simple yet precise digital control unit, for effective and worry-free incubation.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Fiem Mini LED Control Unit with Temperature and...

€183.57
Availability: 998 In Stock
MiniLED Thermostat (OLD) / MiniLED Control Unit (OLD) Complete with lid and front panel – The digital control unit for FIEM incubators (previous version). Advanced system for precise temperature and humidity management with a bright 7-segment display and dual sensors.

The FIEM Mini LED control unit is an advanced incubator control system, designed to ensure precise temperature and humidity management. Equipped with a large seven-segment display, it offers clear and immediate readings. Thanks to the connection to the FIEM Limpia automatic humidifier, it allows direct humidity control.

Main features:

  • ✔ Bright display with decimal units for accurate reading
  • ✔ Humidity display and adjustment with humidifier connection
  • ✔ °C/°F conversion to suit different needs
  • ✔ PID/ON-OFF temperature control mode
  • ✔ Digital sensor calibration for optimal accuracy
  • ✔ Dual temperature and humidity sensor for greater reliability

⚠️ OLD VERSION: This is the previous version of the MiniLED control unit. For newer incubators, the MiniLED Advanced (NEW) is available with a green LED display and improved features.

💰 Price: €110.30 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO – Padovan Avicoltura: only original FIEM components for reliable and long-lasting performance of your incubator.

Compatibility: CIP CIP, MG50, MG70, MG100, API Series (check specific model)

Includes: Complete control unit with double temperature and humidity sensor

By purchasing this product, you choose original FIEM spare parts, guaranteeing high performance for your incubator.

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Wet Bulb Hygrometer / Incubation Hygrometer

€24.50
Availability: 1000 In Stock
Portable Wet Bulb Hygrometer / Incubation Hygrometer – Precision analog instrument for measuring relative humidity in incubators. Based on the psychrometric method, considered one of the most accurate.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00
Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

  • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
  • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
  • Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
  • 🏠 Manage multiple incubators – One app for your entire fleet of machines
  • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥

Front Panel for Miniled, Miniled Advanced, Evo...

€20.25
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🖥️ The communicative face of your incubator.
When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

Check before ordering:
✓ Display works but controls are unresponsive
✓ MiniLED or MiniLED Advanced or Evo Plus control unit
✓ intact rear hooks

⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

Essential data:
💶 Price: €16.60 + VAT
🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

Doubts about compatibility?
Send me 3 photos (incubator, panel, tag) on WhatsApp:
📱 351 881 9586

📌 Scroll below for technical guidance, compatibility chart, and assembly.

ABS Cover for Fiem Control Panel

€21.35
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • 🔍 Precise search for spare parts
  • ✅ Check component integrity before departure
  • 📦 Reinforced protective packaging
  • 📝 Accounting management and tracking

📌 Scroll below for a complete guide, compatibility, and installation.

Support Foot for Fiem Incubators

€0.73
Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🦶 The foot that keeps the machine stable and level.
When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.

Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.

Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.

⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.

Essential data:
💶 Price: €0.60 + VAT (single sale)
🔧 Compatibility: All FIEM models
🏷️ Code: V284
📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.

Any questions? WhatsApp me: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • 🔍 Precise search for spare parts
  • ✅ Check component integrity before departure
  • 📦 Reinforced protective packaging
  • 📝 Accounting management and tracking

📌 Scroll below for full compatibility and fitment.

Cip Cip 28/40 MG50 COSMO Egg Turning Grid Insert

€1.46
Availability: 237 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.

Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.

Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.

⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.

Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for compatibility and fitment.

2 Amp Glass Fuse for Fiem Incubators

€0.51
Availability: 986 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

FIEM 5x20 panel fuse holder

€0.77
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The fuse holder that keeps the contacts always clean and safe.
When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.

Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.

Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.

⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.

Essential data:
💶 Price: €0.63 + VAT (each)
🔧 Compatibility: All FIEM models with standard fuse holder
🏷️ Code: ITWHK52001
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and replacements.

Fiem Anti-Condensation Humidity Probe...

€3.54
Availability: 999 In Stock

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

Fiem cable gland

€2.93
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and fitment.

Fiem ML-Advanced and EvoPlus Central...

€51.85
Availability: 499 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.

Available in the sensor-only version or complete with sensor + protection + cable

Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.

Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.

Slight decimal fluctuations are within the normal characteristics of this type of sensor.

⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
📋 Exploded view ref.: Varies depending on the model
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.


(5/5) out of 1 total ratings
Mg 100/150 Buon rapporto qualità/prezzo
Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

By Temistocle M. the 06/26/2025 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Qualità

Qualità

Qualità prodotti ottima

By Salvatore C. the 06/04/2025 - This review was helpful 0 - 0 You've already voted
Report an abuse
Guida calibrazione e ordini
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 0 You've already voted
Report an abuse
Buona incubatrice familiare!

Qualità

Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

By the 01/24/2025 - This review was helpful 0 - 1 You've already voted
Report an abuse
ncubatrice per Allevatori Seri
Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

By Paolo C. the 01/23/2025 - Incubatrice FIEM.. This review was helpful 0 - 0 You've already voted
Report an abuse
Giuda interessantissima
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 1 You've already voted
Report an abuse
Giuda indispensabile
🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte.. This review was helpful 0 - 1 You've already voted
Report an abuse
Incubatrice Fiem MG 140/200: Qualità e Affidabilità

Qualità

Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

By the 09/19/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse
Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza
Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

By Antonio F. the 09/15/2024 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Ottimo omaggio

Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

By the 09/13/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse

Questo sito utilizza cookie per garantire una navigazione ottimale.