Fiem MG 316 Accessories and Spare Parts

Original FIEM Spare Parts for the MG 316H Incubator

Did your FIEM MG 316H stop working at just the wrong time? We understand how frustrating it is when your incubator stops working mid-cycle, especially if you're hatching valuable eggs. That's why we sell only original FIEM spare parts: each component is designed specifically for this model and guarantees immediate restoration of your machine's original performance. Not sure which part to order or have doubts about the fault? Write us on WhatsApp at 📱 +39 3518819586 Send us four photos: the complete incubator, the technical data plate, the part to be replaced, and a description of the fault. We'll help you identify the correct spare part and let you know if it's available in FIEM's warehouse.
⚠️ FIEM MG 316H Compatibility – NOT interchangeable unless indicated
Spare parts for the MG 316H are designed specifically for this model and are NOT interchangeable with other FIEM incubators (MG 200, MG 244, MG 576, etc.), unless specifically indicated on the individual product sheet. Always check the spare part code on your incubator's data plate or contact us on WhatsApp to verify.

🔧 Spare Parts for MG 316H Component

🌡️ Temperature and Humidity Control

⚡ Before replacing electrical or electronic components: Turn the incubator off completely, wait 60 seconds, then turn it back on. Many apparent problems (frozen display, unread sensors, stopped fan) can be resolved with this simple power cycle, which resets the system. If the problem persists after this operation, proceed with replacing the component.
  • Complete EVO PLUS control unit with T/H sensors: Digital control unit with LCD display, temperature and humidity management, accuracy 0.1°C. Includes integrated temperature probe and humidity sensor. Code EVO PLUS UNIT CONTROL + T/H SENSORS
  • EVO PLUS/ML temperature probe: Decimal precision sensor for PID thermoregulation. Code EVOPLUS/ML T/H PROBE
  • SHT31 Humidity Sensor: Electronic board with case for detecting ambient humidity. Code SHT31
  • Column thermometer °F: Alcohol thermometer in degrees Fahrenheit for visual temperature control. Code 05/A
  • Column hygrometer °F: Alcohol hygrometer for monitoring relative humidity. Code 25/A
  • ABS Thermometer/Hygrometer Holder: Plastic fixing clip for analog instruments. Code T/H clip

🔄 Egg Turning System

  • Complete egg turning gearmotor 117/B: Electric motor with gearbox for automatic egg rotation (compatible with MG 244-316). Code 117/B NEW COMPLETE EGG-TURNING MOTOR (MG244-316)
  • Egg holder frame MG316: Internal metal structure for incubation trays. Code TEL.MG316
  • Egg turning rod with crosspiece: Metal crosspiece support for rotation mechanism. Code T VOLT.AST

🔥 Heating and Ventilation

  • R75H silicone resistance cable: Heating element 2.00 m / 143 W / 170 OHM/MT, coated in SILASTIC type silicone rubber. Code R75H SILICON HEATING CABLE 2.00 m/143W 170 OHM/MT
  • Resistance holder curl: metal fixing bracket for heating cable. Code CURLS
  • Electronic fan 36/D: 220 V ventilation motor with impeller. Code 36/D ELECTRONIC FAN MOTOR 220V
  • V254-28° aluminum fan blade: aluminum impeller Ø 254 mm with 28° blade angle. Code V254-28° ASP. ALUMINUM FAN BLADE D.mm254-28°
  • F13 fan protection grille: Q12 safety wire mesh (compatible with MG244-316). Code F13 Q12 FAN PROTECTION NET (MG244-316)

💡 Practical fan tip: Before replacing a fan that isn't spinning or is making noise, try cleaning it with compressed air and lubricating the crankshaft with a few drops of lubricating oil. In many cases, this fixes unusual noises or irregular rotation, saving you the expense of a replacement.

🛠️ Plastic Structure and Components

  • FIEM-COP.SC14 electrical panel cover: plastic control unit protection cover. Code FIEM-COP.SC14
  • EVO PLUS front panel + keyboard membrane: Plastic front panel with graphics and key membrane. Code LCD FRONT E.
  • Complete plastic porthole 96/A: Transparent inspection hatch with gasket. Code 96/A PORTHOLE/COMPLETE PLASTIC PORTHOLE
  • 3mm monofoam gasket (per metre): thermal insulation cord for doors. Code 240
  • Door hinge 204: Metal door fixing hinge. Code 204 HINGE
  • Door lock clip 2.03.00.04/6: plastic closing clip. Code 2.03.00.04/6 DOOR CLOSING CLIPS
  • S.P. door support: metal door reinforcement bracket. Code S.P.
  • V284 support foot: anti-vibration rubber support. Code V284
  • Adjustable air shutter S/11: Plastic valve for ventilation control. Code S/11 ABS ADJUSTABLE AIR SHUTTER
  • Rubberized air intake ring 96/B: Rubber gasket for air vent. Code 96/B RUBBER RING FOR AIR INLET

⚡ Electronics and Wiring

  • SCHUCKO power cable: 230 V electric cord with European plug. Code SCHUCKO
  • IEC + SCHUCKO cable for humidifier: Automatic humidification system connection cable. Code IEC+SCKH CABLE
  • IEC panel socket: Female connector for accessory power supply. Code IEC PANEL
  • E14 ceramic lamp holder with bracket 0095/A: LED bulb socket with fixing bracket. Code 0095/A
  • 4W E14 LED bulb: 230 V LED lamp for interior lighting. Code LED 4W230 LAMP
  • Single-pole switch RL 34: on/off switch for LCD thermostat. Code RL 34 UNIPOLAR SWITCH FOR LCD THERMOSTAT
  • ITWHK52001 Fuse Holder: protection fuse box container. Code ITWHK52001 BOX FUSE
  • Fuse 2A CF521220: overload safety fuse. Code CF521220 FUSE 2A
  • REISTPG16 cable gland: Skintop type cable gland for panel. Code REISTPG16 CABLE GLAND SKINTOP

💧 Humidification System

  • UM.US Ultrasonic Nebulizer: Automatic humidifier for MG244-316-576-720. Code UM.US ULTRASOUNDS NEBULIZER for MG244-316-576-720
  • Plastic bushing for pipe inlet BOCC.148662: UB-1500 nebulizer tube fitting. Code BOCC.148662
  • BAC.10/45 float tank: water basin with semi-automatic constant level system. Code BAC.10/45 WATER BASIN WITH FLOATER
  • Metal lid for tray 109: Protective cover for BAC.10/45. Code 109 METAL COVER FOR BASIN BAC.10/45
  • Red float 97G: Plastic buoy for semi-automatic humidity system. Code 97G RED WATER FLOATER
  • 11900GAUN Ball Float: Horizontal inlet float valve. Code 11900GAUN FLOATER BALLCOCK horizontal entry
  • 5 litre water can 0083: External tank for automatic humidification kit. Code 0083 WATER TANK 5LT
  • Water pipe Ø 10 mm (per meter): flexible hose for water connection. Code TUB. WATER PIPE D.mm10 (1MT)
  • Tray F02 cm 14.2x9.7x10.5: alternative water container. Code F02 WATER BASIN
  • Plastic tray lid COP.PLAST.F02: F02 tray cover. Code COP.PLAST.F02
  • 100cc hygrometer bottle: cylindrical container for wick. Code BOTTLE 100cc FOR HYGROMETER
  • S.S.B. metal bottle support: hygrometer container fixing bracket. Code S.S.B. WATER BOTTLE METAL SUPPORT
  • Hygrometer wick (per meter): absorbent cord for evaporation system. Code WICK FOR HYGROMETER (1MT)

🥚 Hatching and Incubation Accessories

  • Hatching basket CASS.56020001: perforated plastic basket without lid (compatible with MG200-320-244-316). Code CASS.56020001
  • Black PLT metal mesh cover: top cover for hatching basket (compatible with MG200-320-244-316). Code BLACK PLT COPPER
  • Incubation tray 106 cm 30x50: plastic container for eggs in the incubator phase. Code 106 PLASTIC SETTING TRAY cm30x50
  • Paper for hatching basket CBUL40X60: Disposable absorbent sheets. Code CBUL40X60 PAPER FOR HATCHING BASKETBALL
  • Internal metal structure INC.244: 2-tier tray holder frame for incubation. Code INC.244
  • Rear metal support F222: structural reinforcement at the back. Code F222 BACK SUPPORT FOR
  • Metal crosspiece F/273/5: cross support bar. Code F/273/5 METAL SUPPORT CROSSBAR
  • Vertical rod with 3 pins 242/1: metal upright with adjustment holes. Code 242/1 METAL VERTICAL ROD WITH 3 PIN

⭐ Top Spare Parts for MG 316H – Quick Reference List

ComponentFIEM CodeWhen it's needed
EVO PLUS control unit + sensorsEVO PLUS UNITDisplay off, temperature not adjusted, sensor errors
EVO PLUS temperature probeEVOPLUS/ML T/H PROBEIncorrect temperature reading, sensor alarm
Egg turning gearmotor 117/B117/B NEW (MG244-316)Eggs not rotating, tic-tic noise from the motor
R75H silicone resistorR75H 2mt 143WTemperature does not rise, insufficient heating
220V electronic fan36/DAir does not circulate, uneven temperature, overheating
Aluminum fan bladeV254-28° ASP.Broken impeller, bent blades, abnormal noise
Ultrasonic nebulizerUM.US (MG244-316-576-720)Humidity does not rise, no visible fog
Plastic hatching basketCASS.56020001 (MG200-320-244-316)Broken basket, damaged holes
Thermometer °F05/AAlcohol column interrupted, glass broken
3mm door seal240 (per meter)Heat loss, door doesn't close properly
2A fuseCF521220Car won't turn on after power surge
SCHUCKO power cableSCHUCKO 230VDamaged cable, broken plug

✅ Why Choose Original FIEM MG 316H Spare Parts?

🎯 Specifically Designed for MG 316H
Each component is engineered to the exact technical specifications of this model: from the EVO PLUS control unit with 0.1°C accuracy to the 117/B gearmotor with torque calibrated for the weight of the MG 316 trays. These are not generic adaptations, but spare parts with unique part numbers tested by FIEM on this model since 1975.

🎚️ Guaranteed Original Performance Restoration
The 143W R75H silicone heating element accurately restores the original heat output, eliminating the risk of overheating or underheating. The 36/D fan with V254-28° blades delivers the airflow calibrated by the manufacturer for uniform temperatures throughout the interior.

💪 Longer Lasting Than Compatible Spare Parts
FIEM components pass repeated test cycles: the 117/B gearmotor is tested for over 10,000 consecutive rotations, and the EVO PLUS control unit withstands 5,000 on/off cycles. The plastic materials maintain their mechanical properties even after 500 sanitization cycles with disinfectants.

🛡️ Compliance with Applicable CE Regulations
Where required by European regulations for household electrical appliances, the components comply with EC directives on electrical safety, electromagnetic compatibility, and hazardous substances. Technical documentation is available from FIEM for inspection purposes.

👨‍🔧 FIEM Direct Technical Assistance
By ordering original spare parts, you gain access to the manufacturer's technical support: FIEM has been manufacturing incubators since 1975 (50 years of experience) and knows every detail of the MG 316H. Padovan Avicoltura has been operating in this sector since 1980 and translates FIEM's experience into practical solutions for you.

📅 Extended Spare Parts Availability
FIEM guarantees the availability of critical components for several years after the model's end of production, allowing you to repair your MG 316H even when it's no longer in stock. This is a deliberate industrial choice that protects your investment over time.

📦 Shipping and Support for MG 316H Spare Parts

🚚 Tracked Shipping from FIEM Guanzate (Como)
All original spare parts ship exclusively from the FIEM factory in Guanzate, in the province of Como, via tracked courier. Typical delivery times are 2-4 business days in Italy. You will receive a shipping confirmation email with a tracking number to track your package in real time until delivery.

🔒 12/24 Month Warranty + FIEM DDT
Original FIEM spare parts are covered by a warranty against manufacturing defects: 12 months for VAT numbers, 24 months for private individuals from the invoice date. Keep the FIEM transport document as an official warranty document: in the event of a manufacturing defect within the covered period, FIEM will replace the component at no additional cost.

💬 Minimum Order: Transparency on Logistics Costs

Let's apply a Minimum order of €20 (excluding shipping) to amortize the fixed costs of managing each individual order:

  • Search and collection time of the specific component in FIEM warehouse among thousands of codes
  • Cost and time of professional shockproof packaging to protect delicate components (electronic control units, glass thermometers, sensors)
  • Order Management: issuing invoices, tax documents, registration of guarantee delivery notes
  • Organization of collection and notification to the tracked courier with email confirmation to the customer

💡 Practical advice: If you have multiple components to replace or plan future maintenance, order all the necessary parts together. For example, a thermometer, door gasket, and spare fuse can easily reach the €20 threshold, providing you with everything you need for quick repairs.

🧰 Best Practices for Maintenance of MG 316H Spare Parts

  • 🌡️ EVO PLUS thermostat calibration: Compare the digital reading with the °F column thermometer at the beginning of each season. If the difference is greater than 0.5 °C, access the control unit's SET-UP menu and correct the necessary tenths of a degree following the MG 316H manual (section "EvoPlus Operation and Calibration").
  • 💧 Cleaning the temperature/humidity sensors: Every 3-4 incubation cycles, gently clean the SHT31 temperature probe and humidity sensor with a dry cloth. Do not use solvents or harsh detergents that could damage the sensitive electronic components.
  • 🔄 Egg turner gear motor lubrication: If the 117/B starts to make noise or slows to rotate, apply 2-3 drops of spray lubricating oil to the motor shaft (not the gearbox!). Rotate by hand to distribute the lubricant before restarting.
  • 🔥 Visual check of silicone resistance: Periodically inspect the R75H cable for black spots, cuts, or abrasions in the sheathing. If you notice any damage, replace the resistor immediately: a damaged cable can cause electrical leakage or short circuits.
  • ⚡ Test the fuse before replacing components: If the MG 316H won't turn on, always check the 2A CF521220 fuse in the ITWHK52001 fuse holder first. A blown fuse costs just a few cents and can be replaced in 30 seconds, saving you a complex diagnosis.

💼 Practical case from the field: A farmer from Veneto contacted us because the 117/B gearmotor was making a rhythmic ticking noise and the eggs were no longer rotating. Before ordering the replacement part (€77), we suggested checking the mechanical play of the pin: all he had to do was tighten a screw loosened by the vibrations. The problem was solved in 5 minutes, free of charge, saving him the cost of purchasing a new gearmotor. This is the type of assistance we offer: first, we look for simple solutions, then we propose replacement if truly necessary.

❓ Frequently Asked Questions about MG 316H Spare Parts

My MG 316H does not maintain the set temperature: do I need to change the EVO PLUS control unit?
Not necessarily. Before replacing the control unit (which costs over €300), check these points: 1) Turn off the incubator, wait 60 seconds, and then turn it back on (power cycle); 2) Check that the R75H silicone heating element is intact and warm to the touch when the incubator is on; 3) Check that the 36/D fan is rotating smoothly, distributing the air; 4) Check the 2A fuse. If after these checks the problem persists, then it could be the temperature probe or the control unit itself.

The fan is making noise but still spinning: can I continue using it or should I replace it immediately?
It depends on the type of noise. If it's a light metallic hum, try cleaning the fan with compressed air and lubricating the motor shaft with spray lubricant. If you hear high-pitched squeaks or strong vibrations that worsen over time, the fan has worn bearings and should be replaced before it stops completely, risking overheating the incubator.

Can I use non-original FIEM compatible spare parts to save money?
Technically, yes, for some generic components (fuses, power cables), but for critical parts like the EVO PLUS control unit, 117/B gearmotor, and temperature/humidity sensors, we strongly advise against using non-original spare parts. Mechanical and electrical tolerances must be precise to the nearest tenth of a degree or millimeter: even a slightly different component can compromise hatching or even damage other components of the MG 316H.

💬 Not sure which spare part is right for your MG 316H? Don't risk ordering the wrong part. WhatsApp us at 📱 +39 3518819586 Send us four photos: the complete incubator, the technical data plate, the part to be replaced, and a detailed description of the fault. We'll respond within a few hours with the correct spare part code and FIEM's stock availability.

Sources: FIEM MG 316H EVO PLUS User Manual (Spanish edition), sections "Technical Characteristics", "EvoPlus Operation", "Care and Maintenance"; FIEM 2025 Spare Parts List for Model MG244 (MG244-316 Compatibility Verified on Codes 117/B, F13, UM.US, CASS.56020001, COP.NERO PLT); Padovan Avicoltura operating experience in the FIEM incubator assistance sector (1980-2025).

Active filters

5 lt water tank for Fiem semi-automatic...

€10.76
Availability: 998 In Stock
5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

Minimum order €20: Perfect for ordering the complete semi-automatic kit.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Semi-automatic Humidity System Connection Tube...

€2.31
Availability: 998 In Stock
Semi-Automatic Humidity System Connection Tube – The vital link between the external tank and the incubator. This food-grade PVC tube transports water from the tank to the trays, ensuring constant humidity without manual intervention.

A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

Universal Compatibility:

Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

UB-1500 Plastic Bushing for Fiem Ultrasonic...

€1.02
Availability: 1000 In Stock
FIEM UB-1500 Plastic Bushing for Humidity System Pipe Inlet – A safe passage for the water pipe. This plastic bushing fits into the incubator's hole, allowing the humidity system pipe to pass from the outside to the inside, protecting the pipe from wear and ensuring a proper seal.

When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00
Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

  • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
  • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
  • Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
  • 🏠 Manage multiple incubators – One app for your entire fleet of machines
  • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥

ABS Cover for Fiem Control Panel

€21.35
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The protective shield of the electronic brain.
When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

Essential data:
💶 Price: €17.50 + VAT
🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
🏷️ Code: FIEM-COP.SC14
📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT excl.)

Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

  • 🔍 Precise search for spare parts
  • ✅ Check component integrity before departure
  • 📦 Reinforced protective packaging
  • 📝 Accounting management and tracking

📌 Scroll below for a complete guide, compatibility, and installation.

Fiem Anti-Condensation Humidity Probe...

€3.54
Availability: 999 In Stock

💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

Compatible with FIEM humidity probes .

📱 Problems with humidity readings? Send photos on WhatsApp

🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

Fiem cable gland

€2.93
Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and fitment.

Mg 100/150 Buon rapporto qualità/prezzo
Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

By Temistocle M. the 06/26/2025 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Qualità

Qualità

Qualità prodotti ottima

By Salvatore C. the 06/04/2025 - This review was helpful 0 - 0 You've already voted
Report an abuse
Guida calibrazione e ordini
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 0 You've already voted
Report an abuse
Buona incubatrice familiare!

Qualità

Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

By the 01/24/2025 - This review was helpful 0 - 1 You've already voted
Report an abuse
ncubatrice per Allevatori Seri
Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

By Paolo C. the 01/23/2025 - Incubatrice FIEM.. This review was helpful 0 - 0 You've already voted
Report an abuse
Giuda interessantissima
🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 1 You've already voted
Report an abuse
Giuda indispensabile
🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte.. This review was helpful 0 - 1 You've already voted
Report an abuse
Incubatrice Fiem MG 140/200: Qualità e Affidabilità

Qualità

Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

By the 09/19/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse
Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza
Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

By Antonio F. the 09/15/2024 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
Report an abuse
Ottimo omaggio

Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

By the 09/13/2024 - This review was helpful 0 - 0 You've already voted
Report an abuse

Questo sito utilizza cookie per garantire una navigazione ottimale.