Fiem Cosmo: Accessories and Spare Parts

Fiem Cosmo Esploso Ricambi

Original FIEM Spare Parts for Cosmo Incubators

Has your FIEM Cosmo stopped during an important incubation? We understand how frustrating it is to lose weeks of work due to a worn component. With over 45 years of experience supporting small-scale farmers, we know exactly what you need: original FIEM spare parts delivered quickly, ensuring you're ready to go again right away. 📱 Not sure which component is right for you? Write to us on WhatsApp at +39 351 881 9586 Send us four photos: the complete incubator, the model data plate, the part to be replaced, and a description of the fault. We'll help you identify the correct replacement part.

⚠️ FIEM Cosmo Compatibility – Spare parts are specifically designed for the Cosmo (standard), Cosmo ML (with MINILED ADVANCED control unit), and Cosmo EVO (with EVO PLUS LCD touchscreen control unit) models. They are NOT interchangeable with other FIEM models unless expressly indicated in the product sheet.

🔧 Spare Parts for Cosmo Components

🌡️ Temperature and Humidity Control

⚡ Before replacing electronic components: Turn off the incubator, wait 60 seconds, then turn it back on. This simple "power cycle" resolves over 70% of apparent control unit or sensor problems, avoiding unnecessary replacements.

MINILED ADVANCED control unit (reference code pos. 20) – 3-digit backlit LCD display with temperature and humidity control. 0.1°C resolution, latest-generation self-calibrating sensors. Complete with integrated temperature and humidity probes. For basic Cosmo ML models.
EVO PLUS LCD control unit (reference code pos. 20) – 2.4-inch TFT color touchscreen display with incubation calendar, preset programs for 8 poultry species, and high-temperature audible alarm. Automatic temperature/humidity management with ±0.1°C accuracy. For top-of-the-range Cosmo EVO models.
EVOPLUS/ML Temperature/Humidity probe (code SONDA T/H EVOPLUS/ML, pos. 19) – Professional combined sensor with ±0.1 °C and ±1.5% RH precision. Self-calibrating, compatible with both MINILED ADVANCED and EVO PLUS control units.
MINILED control unit front panel (code FRONT.LCD.E., pos. 16B) – Front cover complete with graphic membrane for MINILED ADVANCED control unit. Includes control label and display protection.
EVO PLUS control unit front panel (code FRONT.LCD E., pos. 16A) – Complete front cover with keypad membrane for EVO PLUS touchscreen control unit. Ergonomic design with integrated screen protector.
Probe support clip (T/H clip code) – ABS holder for attaching analog hair thermometers (older models) or for optimal positioning of digital sensors. Tool-free assembly on the egg turning rack.
Alcohol thermometer °F (code 05/A, item 23) – Precision analog thermometer with Fahrenheit scale (range 80-105°F), used as a backup control for digital models. Length 15 cm with protected bulb.

🔄 Automatic Egg Turning System

Professional adjustable egg turning grid (code 1/3/5, pos. 1+7) – Complete grid with 12 removable and adjustable metal inserts. FIEM patented system for the simultaneous incubation of chicken (70-72), pheasant (96-104), quail (150-180), or turkey (62-64) eggs. Dimensions: 530×380 mm.
Adjustable metal egg turning rod (code ASTA.VOLT.COSMO, item 2) – Transmission bar from gearmotor to grid. Adjustable length 420-460 mm in stainless steel. Essential for synchronizing egg rotation across the entire surface.
Single egg turning gear motor (code 117/F, pos. 24+6) – Electric motor 220 V ~ 50-60 Hz with 1:60 reduction gear. Power 1.5 W, full rotation every 2 hours. Independent power supply can be deactivated during hatching. Also compatible with Smart Digital, Inca and Cip Cip 28/40.
Plastic coupling for gearmotor (code F117M, item 25) – Technical plastic cross-connection for connecting the egg turning rod to the cylindrical motor pin. Subject to wear after 8-10 intensive incubation cycles (annual inspection recommended). Compatible with all FIEM models equipped with the 117/F gearmotor.
Egg turning motor cover (cod. COPER.MOT.COS, pos. 4) – Protective plastic box for external gearmotor housing. Includes cable glands and quick-release system for attaching to the Cosmo lower valve.

🔥 Heating and Ventilation

Double silicone heating cable (code R75F, pos. 22+14) – Flexible electric heating element 210 W, 245 Ohm/m, food-grade silicone coating. Total length 1.8 m with distribution optimized for Cosmo volume.
Resistance ring curl (code RICCIOLI, item 34) – Spiral metal bracket for attaching heating cable to the upper cap. Allows thermal expansion without mechanical stress on the cable. Kit of 4 pieces.
Complete fan 10/20 W single phase (code 36, pos. 26+13) – Axial fan motor 220 V ~ 50-60 Hz, flow rate 180 m³/h. Silent-run technology with self-lubricating bearings. Includes IP44 protection against dust and splashes.
Aluminum fan blade Ø 230 mm (code 67, item 27) – Dynamically balanced 4-blade propeller with an optimized 18° angle for maximum efficiency and silence. Direct mounting on Ø 8 mm crankshaft. Compatible with MG100, MG140, and MG316H.
Q12 fan protection net (code: RETE PROT.COS, pos. 9+4) – Electro-welded metal grille with 12x12 mm square mesh. Prevents accidental contact with rotating blades while maintaining optimal airflow. Dimensions: 250x250 mm.

🛠️ Plastic Structure and Components

ABS Cosmo lower valve (code FONDO COSMO, item 5) – Complete lower body in ABS plastic compound reinforced with structural ribs. Includes housings for 3 modular humidity trays and FIEM patented external filling system. Dimensions: 640×530×180 mm.
ABS Cosmo upper valve (code SOPRA COSMO, item 10) – Aerodynamic ABS upper shell with optimized profile for even heat distribution. Includes control unit compartment, fan housing, and internal lighting system. Dimensions: 640×530×220 mm.
Transparent polycarbonate door (code PORTA COSMO, pos. 7+16) – Front door made of 3 mm thick shockproof polycarbonate with anti-UV treatment. Ensures perfect internal visibility and calibrated air exchange through lateral micro-perforations. Dimensions: 480x360 mm.
Cosmo door hinges (cod. CERNIERE COS., pos. 3) – Kit of 2 stainless steel hinges with self-lubricating pins. Resistance to 50,000 opening/closing cycles. Tool-free assembly on snap-in fittings.
Assembly hooks with threaded insert (code GACOS, item 6) – Set of 4 galvanized steel hooks for joining the upper and lower valves. Patented hermetic sealing system without external screws. Includes a food-grade silicone perimeter gasket.
Internal lower valve caps (code TAPPINI, item 11) – Set of 6 plastic caps for closing structural holes and cable glands. Aesthetic and safety features to prevent dirt buildup.
Control panel front cover (code: FRONT CAP COS, pos. 12) – ABS front cover for control unit circuit protection. Includes switch housing and sensor cable routing.
Rear control panel cover (cod. TAPPO POS.COS, pos. 13) – Rear cover with snap-on fastening system. Includes PG cable gland for power cable and humidifier outlet.

⚡ Electronics and Wiring

Schuko power cable (code SCIUCKO, item 15) – Electric cable 220-240 V ~ 50-60 Hz, cross-section 3×1.5 mm², length 2 m. 16 A two-pole Schuko plug with earthing. Complies with CEI 23-50 regulation.
P67 cable gland (code P67, item 14) – IP67 hermetic nylon cable gland for power cable entry in the lower valve. Compatible cable diameter: 8-13 mm. Mounting on a 20 mm diameter hole.
LCD single pole switch (code RL 34, pos. 32+33) – On/off switch for power and internal lighting control. 10 A – 250 V rating, V0 self-extinguishing plastic body. Compatible with MINILED and EVO PLUS control units.
Schuko 16 A flying socket (code PRESA SCKH, pos. 29) – Two-pole service socket for connecting an automatic ultrasonic humidifier (optional accessory). Includes a protective cap when not in use.
4W E14 LED bulb (code LAMP.LED4W230, pos. 28+17) – Energy-saving LED lamp, small E14 socket, color temperature 3,000 K (warm light). Lifespan 15,000 hours. Replaces old 15 W incandescent lamps, guaranteeing 73% less energy consumption.
E14 ceramic lamp holder (code 0095/A, item 35) – Porcelain lamp holder with metal mounting bracket. Thermal resistance up to 250°C, class II insulation. Wiring with screw terminal block.

🌊 Humidification System

Bottom metal mesh (cod. RETE BASE COS, pos. 8) – Electro-welded expanded mesh surface for resting eggs during hatching (last 2 days without egg turning grid). 10×10 mm mesh, dimensions 600×500 mm. AISI 304 stainless steel, dishwasher-safe.
Modular humidity trays (integrated in the lower valve pos. 5+9) – System with 3 independent trays with a total capacity of 1.2 liters. Filling from the outside without opening the incubator via a communicating vessel tank. Total evaporating surface: 1,200 cm².

⭐ Top Cosmo Spare Parts – Quick Table

Component	Reference Code	When to Replace	Compatibility
MINILED ADVANCED control unit	Pos. 20 (with T/H sensors)	Display unreadable, sensor error	Cosmo ML
EVO PLUS LCD control unit	Pos. 20 (with T/H sensors)	Touchscreen not responding	Cosmo EVO
EVOPLUS/ML T/H probe	EVOPLUS/ML T/H PROBE	Reading ** on the display	Cosmo ML/EVO
Double heating cable	R75F (210 W, 245 Ohm/mt)	Unstable temperature, no heating	Only Cosmo
Egg turning gear motor	117/F (1.5 W)	Absent or irregular rotation	Smart/Inca/Cip/Cosmo
Plastic engine joint	F117M	Loud tic-tic, obvious game	Smart/Inca/Cip/Cosmo
Complete fan 10/20 W	36 (220 V ~ single phase)	Abnormal noise, slow rotation	Cosmo/MG100/MG140
Aluminum fan blade	67 (Ø 230 mm)	Deformed blade, vibrations	Cosmo/MG100/MG140
Adjustable egg turning grid	1/3/5 (+ 12 inserts)	Rotation blocked, deformations	Only Cosmo
Transparent door	COSMO DOOR (polycarbonate)	Cracks, dullness, loss of seal	Only Cosmo
Complete lower valve	COSMO FUND (ABS)	Structural breaks, deformations	Only Cosmo
4W LED bulb	LED LAMP 4W230 (E14)	Light off or flashing	All FIEM E14 models

✅ Why Choose Original FIEM Cosmo Spare Parts?

🎯 Certified dimensional accuracy
The plastic compound components of the Cosmo (lower valve code FONDO COSMO, upper valve code SOPRA COSMO) are made with precision injection molds with tolerances of ±0.2 mm. This guarantees perfect coupling of the two valves and a hermetic seal without heat loss.

🎛️ Electronics with self-calibrating sensors
The MINILED ADVANCED and EVO PLUS control units use latest-generation combined temperature/humidity sensors (code SONDA T/H EVOPLUS/ML) with a self-calibration algorithm that compensates for temperature drift over time. Accuracy maintained at ±0.1°C for at least 3 years of continuous use. Aftermarket control units with economical DHT22 sensors lose accuracy after 6-12 months, requiring manual calibration.

🛡️ Electrical and safety compliance
All original FIEM electrical components (R75F heating cable, 36 fan, 117/F gear motor) are certified according to EN 60335-2-71 standards for agricultural equipment. They include protection against overheating, short circuits, and overvoltages. The food-grade silicone heating cable withstands temperatures up to 250°C without releasing toxic fumes, essential for the safety of newly hatched animals.

📅 Multi-year guaranteed spare parts availability
FIEM maintains strategic stocks of all critical components for at least 10 years after the end of model production. The Cosmo, launched in 2018 and still in the catalog, has spare parts availability guaranteed until 2033 at the latest. This protects your investment in the long term: with routine maintenance (heating cable replacement every 5,000 hours, motor coupling every 10 cycles), the Cosmo can operate for over 15 years.

📦 Cosmo Spare Parts Shipping and Support

🚚 Direct shipping from the FIEM Guanzate factory
All original spare parts are shipped exclusively from the FIEM factory in Guanzate, in the province of Como, via tracked BRT or GLS courier. Typical delivery times are 2-4 business days in Italy and 5-7 days in Europe. Each shipment includes:

Professional shockproof packaging with bubble wrap and reinforced boxes for delicate components (control units, sensors, polycarbonate door)
Full tracking via email and SMS with real-time shipment tracking link
Declared value insurance included on all orders over €100
Official FIEM DDT attached to the goods as a tax and guarantee document

🔒 Differentiated warranty and certification
Original FIEM spare parts are covered by a warranty against manufacturing defects in accordance with current legislation:

12 months for VAT numbers (professional/semi-professional use) from the invoice date
24 months for private individuals (domestic/hobby use) from the invoice date

Please retain the FIEM transport document as an official warranty document. The warranty covers the free replacement of defective components, excluding labor and return shipping costs. It does not cover normal wear and tear (e.g., plastic engine gaskets, light bulbs) or damage caused by improper use.

💬 Minimum Order: Transparency on Logistics Costs

We apply a minimum order of €20 (VAT excluded, shipping excluded) To offset the operating costs of spare parts management. This limit reflects the actual costs incurred for each order:

Search and collection time of the specific component in FIEM Guanzate warehouse (catalogue 2,500+ active codes)
Cost and time of shockproof packaging customized for each type of spare part (control units require double bubble wrap + cardboard reinforcement, metal components require scratch protection)
Administrative order management: issuing invoices, delivery notes, customs documents for non-EU countries, updating batch traceability
Retreat organization and tracked courier notification with assignment of a unique tracking number

💡 Practical advice: If you only need to replace a single, low-cost component (e.g., F117M plastic seal, €1.58), consider ordering a spare part (e.g., LED bulb, backup thermometer) to meet the threshold and avoid future downtime. Many customers order the heating cable, motor seal, and LED bulb together, ensuring 2-3 years of battery life.

🧰 Best Practices for Cosmo Spare Parts Maintenance

🔍 Pre-season check-up (annual)
Before the breeding season, spend 30 minutes doing a thorough visual inspection: check the integrity of the heating cable (no silicone cracks, no overheating points), smooth rotation of the gear motor without ticking, cleanliness of the fan blades from accumulated dust, transparency of the polycarbonate door (opacity indicates UV degradation), tightness of the valve gaskets.

🧼 Post-incubation cleaning with biosafety protocol
After each hatching cycle, disinfect with Glutarsan (a specific virucidal/bactericidal disinfectant for poultry, available from FIEM). Remove the egg turning grid and bottom mesh, wash with neutral detergent and a soft brush, and rinse thoroughly. Clean the humidity trays with white vinegar to remove limescale deposits. Dry completely before storage to prevent mold.

⚙️ Weekly control unit check
Every week, if possible, every day, check the temperature accuracy by comparing the control unit reading with a certified reference thermometer (e.g., digital clinical thermometer ±0.1°C). If the deviation is >0.3°C, recalibrate via the technical menu (for MINILED: simultaneous ▲+▼ keys → t.CAL; for EVO PLUS: Settings → Calibration). Detailed procedure included in the downloadable user manual.

🔄 Preventive replacement of the engine joint
The F117M plastic joint is subject to wear from repeated torsional stress. Replace it preventively every 10 complete incubation cycles (approximately 200 days of continuous operation) or at the first sign of a ticking noise during rotation. Cost: €1.58, 5-minute intervention without tools. Avoid the risk of egg rotation jamming mid-incubation.

🌀 Quarterly fan maintenance
Every 3 months, with the incubator turned off and unplugged, remove the fan guard (4 Phillips screws), clean the blades with a damp cloth, and check for axial play on the motor shaft. Apply 1-2 drops of bearing lubricating oil (such as Singer or 3-in-1) to the fan bearings only if the noise increases. Do not over-lubricate to avoid dust accumulation.

💼 Practical case study from the field (Veneto breeding, 2024): A Cosmo EVO customer reported an abnormal noise from the gearmotor on the 18th day of pheasant incubation. Telephone diagnosis: F117M joint worn with 2-3 mm play. Express delivery of replacement joint (delivery within 48 hours), customer's own replacement in 5 minutes. Incubation completed successfully, 94% hatching rate. Avoided purchase of complete gearmotor €41.90 and incubation stop.

❓ Frequently Asked Questions about Cosmo Spare Parts

My MINILED control unit displays asterisks ** instead of the temperature. Should I replace the control unit or just the sensor?
The display ** indicates a probe reading error. In 90% of cases, the problem is with the EVOPLUS/ML T/H PROBE sensor (item code 19, €42.50) and not the control unit. Before ordering, try power cycling: turn off, wait 60 seconds, and turn back on. If the problem persists, check the physical connection between the sensor and the control unit (cable not severed, connector fully inserted). Only if a new sensor does not solve the problem, consider replacing the entire control unit (€176.00 MINILED ADVANCED or €320.00 EVO PLUS).

The Cosmo's fan is making increasing noise. Should I lubricate it or replace it?
If the noise is a constant hissing sound (not a high-pitched whistle), try conservative maintenance first: turn off the incubator, remove the protective mesh, blow compressed air on the blades to remove accumulated dust, and apply 1-2 drops of bearing lubricating oil. Turn the propeller manually: if it rotates smoothly and silently, the problem is solved. If the noise persists or you notice play on the motor shaft, replace the entire fan (code 36, €42.55). Lubrication extends the lifespan by 2-3 years if done correctly every 6 months.

I have a 2019 Cosmo with an older-style analog control unit. Are current spare parts compatible?
The Cosmo underwent an evolution in 2020, switching from an analog thermostat to the MINILED ADVANCED. The structural spare parts (valves, grille, gearmotor, fan, heating cable) are 100% backwards compatible. The control unit is NOT backwards compatible: if you need to replace it, you need to upgrade to the MINILED ADVANCED (€176.00) or EVO PLUS (€320.00), which requires modifying the control panel hole (available from FIEM with detailed instructions). All other mechanical/electrical components are standard and interchangeable between all Cosmo models.

💬 Not sure which part is right for your Cosmo? Write to us on WhatsApp at +39 351 881 9586 by sending us four photos: complete incubator (front and side view to identify the exact version), technical data plate (on the back of the lower valve with serial number and year of production), part to be replaced (maximum detail) and description of the fault encountered. We'll confirm availability and compatibility for you on the same day.

Sources: FIEM New Generation 2025 catalog, pages 6-7; Cosmo 2024 Incubator User Manual, pages 1-12; Cosmo technical exploded view, items 1-35; Updated FIEM Cosmo ML/EVO 2025 spare parts list; Padovan Avicoltura customer service experience 2020-2025 (database of 340+ interventions on Cosmo models).

There are 21 products.

Sort by:

FIEM

Cable Gland for Power Cable Fiem Smart and Cosmo

€0.77

Availability: 1000 In Stock

🔒 The P67 cable gland is not just a gasket: it is the guardian that protects electrical cables from wear and tear and prevents water infiltration at critical points!

At just €0.63 (excluding VAT) , this small component plays a vital safety role. The P67 cable gland (GLAND for POWER CABLE in the price list) blocks and protects the power cable where it enters the incubator, preventing dangerous kinks, accidental tears, and moisture infiltration that could cause short circuits.

⚡ As every electrician knows, the most vulnerable point of any cable is where it passes through a wall or panel. Without a strain relief, the cable rubs against sharp edges, the insulation deteriorates, and moisture penetrates. With the P67, the cable is securely clamped and protected from mechanical stress.

⚠️ When should you replace it? If the cable gland is cracked or broken, if it no longer grips the cable and allows it to move freely, if the rubber is hardened and no longer seals, or if it's missing completely after maintenance.

💡 A missing or damaged cable gland poses serious risks: the cable can tear, moisture can enter the circuitry, and short circuits can occur. For €0.63, it's not worth the risk!

✅ Compatible with Smart and Cosmo , standard for power cable passage.

📱 Not sure about the condition of your cable gland? Send us a WhatsApp photo of the cable entry point.

🚚 Shipping from Como. Minimum order €20 - add other small spare parts. FIEM since 1975 , even the details count for safety. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Power Cable for Automatic Humidification of...

€14.23

Availability: 1000 In Stock

🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

FIEM

Plastic Cams for Fiem Smart, Easy, Cip, Inca,...

€1.93

Availability: 1000 In Stock

SMART/EASY/CIP/INCA/COSMO Gear Motor Cams / Plastic Joint for Turning Motor – The connecting component between the electric motor and the egg turning grid. This plastic joint transmits the motor's rotary motion to the grid, allowing the eggs to turn automatically.

A customer from Udine called me: "The motor turns but the rack no longer moves, the eggs aren't turning." Upon checking over the phone, the plastic cam had cracked, and the motor was spinning without moving. After replacing the F117M cam, the turning function was back to normal.

When is it needed? If the motor turns but the grid doesn't rotate , or the turning is irregular, with jerks or jams. Even if you hear the motor working but see that the eggs don't move. The plastic cam is a component subject to mechanical wear and can break or wear out after years of continuous cycles.

Symptoms of a damaged cam: Noisy motor, grille that sticks mid-stroke, incomplete cam turn, visibly cracked cam

💰 Price: €1.58 each (excluding VAT, excluding shipping) – FIEM WAREHOUSE IN COMO – Original FIEM quality guaranteed by Padovan Avicoltura for your incubator.

Universal compatibility FIEM: SMART, EASY, CIP (CIP CIP 28, CIP CIP 40), INCA, COSMO – always check your model.

⚠️ Critical component: Without a functioning cam, the automatic turning does not work and you must manually turn the eggs 3-5 times a day (a delicate and risky operation).

Minimum order €20: Consider adding other spare parts (fuse €0.42, thermometer €22.05, trays €1.30).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

Temperature Probe for Old Fiem LCD Control Unit

€16.72

Availability: 1000 In Stock

LCD Thermostat Temperature Sensor (old) – The sensor that detects the incubator's internal temperature and allows the LCD thermostat to regulate the heating. This critical component constantly transmits temperature data to the thermostat to maintain the incubator at 37.5-37.7°C.

When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

FIEM

Wet Bulb Hygrometer / Incubation Hygrometer

€24.50

Availability: 1000 In Stock

Portable Wet Bulb Hygrometer / Incubation Hygrometer – Precision analog instrument for measuring relative humidity in incubators. Based on the psychrometric method, considered one of the most accurate.

When is it needed? To check the accuracy of digital sensors in control units, as an independent monitoring tool during critical cycles, to diagnose problems when hatching is not going well, or as the primary tool in incubators without a built-in hygrometer. Essential for breeders seeking a reliable, battery-free monitoring system.

Why the wet bulb method? This principle uses the evaporation of water from a damp cloth to determine relative humidity. It is considered one of the most accurate and reliable methods, with an accuracy of ±3% RH. Unlike digital hygrometers, it does not require power or frequent calibration.

Exclusive Benefits: Specifically calibrated for 37.8°C (incubation temperature), direct reading in %RH without tables, low measurement inertia, no batteries required, extremely accurate for the incubator environment. The set includes a ready-to-use humidifying cloth.

Comparison with a hair hygrometer: The wet bulb hygrometer offers faster response and greater accuracy (±3% vs. ±5-10% for hair). Hair hygrometers are sensitive to wear, dirt, and temperature, require periodic regeneration, and have slow response. For professional incubation, the wet bulb is the more reliable choice.

💰 Price: €24.50 (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Poultry Farming: professional tools for successful incubation.

Compatibility: Universal - works with any forced-air or still-air incubator

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

💡+ Info? Read the full description below.

-€70.00

FIEM

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00

Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
🏠 Manage multiple incubators – One app for your entire fleet of machines
🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥

FIEM

Cip Cip 28/40 MG50 COSMO Egg Turning Grid Insert

€1.46

Availability: 237 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The tracks that make the eggs rotate like a chicken does in nature.
When the insert is broken, bent, or missing, the eggs do not rotate properly, compromising hatching.

Quick diagnosis: bent, broken, or rusted metal insert. Small but essential component for smooth rotation.

Solution: original FIEM insert in galvanized metal for CIP CIP 28/40 MG50 COSMO.

⚠️ When to replace it: if it is bent, broken, or the eggs don't sit properly.

Essential data:
💶 Price:
• CIP CIP 28: €1.20 + VAT (each)
• CIP CIP 40: €1.26 + VAT (each)
🔧 Compatibility: CIP CIP 28-40 MG50, Cosmo (Exploded 2)
🏷️ Code: INSERT.CIP28-40-MG50-COSMO
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for compatibility and fitment.

FIEM

2 Amp Glass Fuse for Fiem Incubators

€0.51

Availability: 986 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The fuse that sacrifices itself to save the control unit.
When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

Essential data:
💶 Price: €0.42 + VAT (each)
🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
🏷️ Code: CF521220
⚡ Specifications: 2 Ampere, 250V, 5x20mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

FIEM

FIEM 5x20 panel fuse holder

€0.77

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The fuse holder that keeps the contacts always clean and safe.
When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.

Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.

Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.

⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.

Essential data:
💶 Price: €0.63 + VAT (each)
🔧 Compatibility: All FIEM models with standard fuse holder
🏷️ Code: ITWHK52001
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and replacements.

FIEM

Fiem cable gland

€2.93

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔒 The safe passage that protects cables from tension and humidity.
When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

Essential data:
💶 Price: €2.40 + VAT (each)
🔧 Compatibility: All FIEM models with PG16 hole
🏷️ Code: REISTPG16
📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
📦 Availability: IN STOCK – Shipping within 24 hours (railways)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

📌 Scroll below for compatibility and fitment.

FIEM

Adjustable egg turning grid for Fiem Cosmo...

€64.05

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔄 The automatic hand that imitates a hen.
This grid is the heart of the turning system: it houses the inserts that separate the eggs into neat rows and, connected to the gearmotor, makes them roll gently back and forth, just like a hen in her nest.

Quick diagnosis: eggs that do not rotate, bent or deformed grid, inserts that do not stay in place, jerky or incomplete movement.

Solution: Original FIEM Adjustable Insert Egg Turning Grid, specifically for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Brescia with a COSMO EVO had the original grid warped after 6 years of intensive use. The eggs no longer rolled evenly, and hatching rates had dropped. He replaced the grid in 10 minutes, and the next cycle brought the hatching rate back to 85%.

⚠️ When to replace it: If you notice warping, cracks, or the inserts no longer staying in place, it's time to replace it. A damaged grid compromises the voltage and drastically reduces hatching rates.

Essential data:
💶 Price: €52.50 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: 1/3/5
📋 Exploded view ref.: n. 1
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

FIEM Cosmo Incubator Door Hinge

€1.80

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🚪 The invisible pin that holds everything in place.
Hinges are the small hinges that allow the transparent door to open and close properly. They seem insignificant, but if they break or become loose, the door won't close properly, and you lose heat and humidity.

Quick diagnosis: door that doesn't close properly, excessive play, broken or bent hinge, door that "falls" to one side.

Solution: Original FIEM door hinge for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Bari with COSMO ML had a door that wouldn't close properly. He thought the door needed replacing, but it was just a broken hinge. Replaced in 5 minutes for less than 2 euros, problem solved.

⚠️ When to replace it: If the door no longer closes properly or you notice excessive play, check the hinges immediately. Improper closure causes heat and humidity to escape, compromising hatching.

Essential data:
💶 Price: €1.47 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: HINGES COS.
📋 Exploded view ref.: n. 3
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

ABS Lower Body for Fiem Cosmo Incubator

€61.88

Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🏠 The foundation on which the entire incubator rests.
The COSMO base is the lower ABS shell that contains the humidity trays, supports the support mesh, and holds up the entire structure. If it cracks or breaks, you lose its watertightness, moisture retention, and stability.

Quick diagnosis: visible cracks, water leaks from the trays, body deformed by heat, breaks at the corners or attachment points.

Solution: Original FIEM COSMO primer in high-strength ABS. Compatible with COSMO, COSMO EVO, and COSMO ML.

📌 Real case: A customer in Vicenza with a COSMO incubator had a cracked bottom after 8 years of use. Water leaked from the trays, and the humidity never rose above 40%. After replacing the bottom, the incubator returned to working perfectly with stable humidity.

⚠️ When to replace it: If you notice cracks, warping, or water leaks, the bottom should be replaced. A damaged shell compromises airtightness and humidity, ruining entire broods.

Essential data:
💶 Price: €50.72 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FONDO COSMO
📋 Exploded view ref.: n. 5
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Hook + Threaded Insert for Anchoring Lower to...

€3.46

Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔗 The lock that holds the entire incubator together.
The GACOS is the hook with a threaded insert that connects the lower shell to the upper shell. If it breaks or loosens, the two shells will no longer seal properly, and you lose heat and moisture.

Quick diagnosis: shells that do not engage, broken or bent hook, stripped threaded insert, closure that does not hold.

Solution: Original FIEM GACOS for COSMO, COSMO EVO, and COSMO ML incubators. Price each.

📌 Real case: A customer in Treviso with a COSMO EVO had a car that wouldn't close properly and was losing heat. He thought it was an electrical problem, but it was just a broken GACOS. It was replaced in 2 minutes, and the problem was solved for less than 3 euros.

⚠️ When to replace: If the two shells no longer fit securely or you notice any play between the parts, check the GACOS immediately. An imperfect seal disperses heat and moisture.

Essential data:
💶 Price: €2.84 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: GACOS
📋 Exploded view ref.: n. 6
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Fiem Cosmo Incubator Plastic Door

€24.22

Availability: 200 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

👁️ The window that lets you see everything without opening it.
The COSMO transparent door lets you check your eggs, temperature, and humidity at a glance, without opening the machine and losing heat. If it's opaque, scratched, or cracked, you lose visibility and airtightness.

Quick diagnosis: dull or yellowed door, deep scratches that obscure vision, cracks or breaks, door that doesn't close properly.

Solution: Original FIEM Transparent Door for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Mantua with a COSMO ML had a door so opaque from using harsh detergents that he couldn't see the eggs. To check on the hatching, he had to open it every time, losing heat. After replacing the door, he was able to monitor everything again without touching the machine.

⚠️ When to replace it: If the door is cloudy, yellowed, scratched, or cracked, it's time to replace it. A damaged door forces you to open the car to check, dispersing heat and humidity.

Essential data:
💶 Price: €19.85 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: COSMO DOOR
📋 Exploded view ref.: n. 7
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

COSMO Base Network - Expanded Mesh Flooring

€20.24

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛏️ The floor that lets the eggs breathe from below.
The COSMO base mesh is the perforated surface on which the eggs rest. It allows warm air and humidity to rise from the trays below, ensuring even distribution throughout the incubation chamber.

Quick diagnosis: rusty netting, broken or loosened meshes, bent or deformed netting, eggs that do not sit securely.

Solution: Original FIEM expanded mesh base for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Rovigo with a COSMO EVO had a rusty base net after 7 years. The eggs were no longer stable, and some had broken during the hatching process. The net was replaced, no broken eggs, and hatching was normal again.

⚠️ When to replace it: If the mesh is rusty, warped, or has broken links, the eggs will no longer sit securely and may be damaged during turning. It's best to replace it immediately.

Essential data:
💶 Price: €16.59 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: BASE NETWORK COS
📋 Exploded view ref.: n. 8
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Fiem Cosmo Incubator Fan Protection Net

€29.60

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🛡️ The invisible barrier that protects the fan blades and your hands.
The COSMO fan guard prevents feathers, shells, and foreign objects from getting caught in the rotating blades. It protects the fan motor from damage and ensures a constant and safe airflow.

Quick diagnosis: broken or punctured mesh, loosened mesh, deformed mesh touching the blades, abnormal noises from the fan.

Solution: Original FIEM Q12 Fan Protection Net for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Brescia heard a rhythmic noise from his COSMO ML. He thought it was the engine that needed replacing. In reality, the safety net was warped and was touching the blades with every rotation. He replaced the net in 10 minutes, and the noise disappeared.

⚠️ When to replace it: If the mesh is broken, warped, or has loosened holes, you risk debris entering the fan, causing motor damage or sudden blockages.

Essential data:
💶 Price: €24.26 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: RETE PROT.COS
📋 Exploded view ref.: n. 9
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Upper ABS Shell for Fiem Cosmo Incubator

€63.90

Availability: 103 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🏠 The roof that protects the heart and brain of the incubator.
The COSMO upper body houses the control panel, fan motor, heating element, and heating cable. It is the supporting structure of the entire control and heating system.

Quick diagnosis: visible cracks on the body, breaks at the fixing points, heat deformations, damaged housings for the control unit or fan.

Solution: Original FIEM ABS Upper Body for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer in Vicenza had a cracked top cover near the fan after a fall. The temperature wouldn't stay stable because hot air was escaping from the crack. After replacing the cover, the incubator worked perfectly again.

⚠️ When to replace it: If the shell is cracked or warped, you lose thermal insulation and the incubator will struggle to maintain its temperature. Every crack is a source of heat loss.

Essential data:
💶 Price: €49.90 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: ABOVE COSMO
📋 Exploded view ref.: n. 10
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Fiem Cosmo Incubator Lower Body Inner Caps

€0.90

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🔌 The caps that close the internal holes and maintain insulation.
COSMO internal plugs are small plastic inserts that seal the fixing holes and openings in the bottom shell. They prevent heat and humidity loss, maintaining a stable incubation environment.

Quick diagnosis: missing, broken, or loose caps, open holes in the body, cold air drafts from below.

Solution: Original FIEM internal caps for the lower body of COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A customer from Rovigo noticed unstable temperatures in his COSMO EVO. After checking the control unit and heating element, he discovered that two caps on the bottom were missing. He replaced them and the problem was immediately solved.

⚠️ When to replace them: If the caps are missing or broken, cold air enters from the bottom and hot air escapes. These may seem like small details, but they make a difference in thermal stability.

Essential data:
💶 Price: €0.74 + VAT (each)
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: CAPS
📋 Exploded view ref.: n. 11
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Front Cover Control Panel Fiem Cosmo Incubator

€16.14

Availability: 1000 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🎛️ The frame that protects the electronic heart of the incubator.
The front cover of the COSMO control panel is the front bezel that covers and protects the power and light switches. It gives the panel a clean look and prevents dust and moisture from entering the electrical components.

Quick diagnosis: broken or cracked cover, loose connectors, missing bezel, exposed switches.

Solution: Original FIEM Control Panel Front Cover for COSMO, COSMO EVO and COSMO ML incubators.

📌 Real case: A farmer in Cuneo had his front cover broken after an accidental impact. The switches were exposed, and water leaked in during cleaning. He replaced the cover in 5 minutes, and the control panel was protected again.

⚠️ When to replace it: If the cover is broken or missing, the electrical components are exposed to dust, moisture, and shock. It's best to replace it immediately to avoid more serious problems.

Essential data:
💶 Price: €13.23 + VAT
🔧 Compatibility: COSMO, COSMO EVO, COSMO ML
🏷️ FIEM Code: FRONT CAP COS
📋 Exploded view ref.: n. 12
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

💬 Minimum order €20 (VAT included)

For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

Why? The lower amounts don't cover the time spent searching for replacement parts, checking quality, packaging, order processing, and accounting.

📌 Scroll below for full compatibility, fitment, and related parts.

FIEM

Fiem ML-Advanced and EvoPlus Central...

€51.85

Availability: 499 In Stock

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.

Available in the sensor-only version or complete with sensor + protection + cable

Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.

Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.

Slight decimal fluctuations are within the normal characteristics of this type of sensor.

⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.

Essential data:
💶 Price: €42.50 + VAT
🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
📋 Exploded view ref.: Varies depending on the model
📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

Questions? WhatsApp: 351 881 9586

📌 Scroll below for full compatibility, fitment, and related parts.

Mg 100/150 Buon rapporto qualità/prezzo

Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

By Temistocle M. the 06/26/2025 - Incubatrice Fiem..

Qualità

Qualità prodotti ottima

By Salvatore C. the 06/04/2025 -

Guida calibrazione e ordini

🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e..

Buona incubatrice familiare!

Qualità

Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

By the 01/24/2025 -

ncubatrice per Allevatori Seri

Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

By Paolo C. the 01/23/2025 - Incubatrice FIEM..

Giuda interessantissima

Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e..

Giuda indispensabile

🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte..

Incubatrice Fiem MG 140/200: Qualità e Affidabilità

Qualità

Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

By the 09/19/2024 -

Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza

Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

By Antonio F. the 09/15/2024 - Incubatrice Fiem..

Ottimo omaggio

Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

By the 09/13/2024 -

Pagamento: A RATE, Bonifico, PayPal, Carta di Credito, Ricarica PostePay, Pagamento alla Consegna, Satispay ecc.

tags

Fiem Cosmo: Accessories and Spare Parts

Original FIEM Spare Parts for Cosmo Incubators

🔧 Spare Parts for Cosmo Components

🌡️ Temperature and Humidity Control

🔄 Automatic Egg Turning System

🔥 Heating and Ventilation

🛠️ Plastic Structure and Components

⚡ Electronics and Wiring

🌊 Humidification System

⭐ Top Cosmo Spare Parts – Quick Table

✅ Why Choose Original FIEM Cosmo Spare Parts?

📦 Cosmo Spare Parts Shipping and Support

💬 Minimum Order: Transparency on Logistics Costs

🧰 Best Practices for Cosmo Spare Parts Maintenance

❓ Frequently Asked Questions about Cosmo Spare Parts

💡+ Info? Read the full description below.

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control Only €119 instead of €189 – €70 savings

Why thousands of farmers will no longer be able to do without it

Compatibility

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

Find the Ideal Incubator for Your Farm: Request Your Free Guide Now!

Request the Buying Guide

Are you a new customer?

Request a purchasing consultation

PADOVAN POULTRY FARMING

INFORMATION

INFORMATION  

ASSISTANCE

NEWSLETTER SUBSCRIPTION

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

INFORMATION