Fiem MG140/200 Rural: Accessories and Spare Parts

Fiem MG140/200 Rural: Accessories and Spare Parts

Exploded View of Spare Parts for the Fiem MG 140 Incubator

Looking for spare parts for your Fiem MG140/200 Rural incubator? You've come to the right place.

Here you'll find all the original FIEM spare parts for the MG140/200 Rural: heating elements, temperature sensors, egg turning motors, circulation fans, egg trays, and hatching drawers. Certified Made in Italy quality, shipped directly from the FIEM factory in Como with an official warranty.

The MG140/200 Rural stands out for its intermediate capacity of 140 eggs, perfectly balancing advanced family use with semi-professional use, thanks to the 20mm insulated panels and the EVO PLUS LCD control unit with color display. Padovan Avicoltura offers WhatsApp technical assistance to identify the right spare part and resolve any questions. Many spare parts can be used on the A 140 for bees.

🔍 Spare parts available for the Fiem MG140/200 Rural

In this category you will find all the original FIEM spare parts and accessories specific for the MG140/200 Rural:

  • Heating components: 2m 143W silicone ceramic heating elements, heating element holders, Schuko power cables
  • Egg turning system: complete reduction motor 117/B, metal egg turning bar 140/200, egg retaining springs for baskets
  • Humidification components: BAC.10/45 tray with 97G red float, 5lt external tank, 109 metal lid, Ø10mm water pipe
  • Ventilation and temperature control: 10/20W single-phase fan code 36, 234mm aluminum blade code 67, Q12 protection mesh, EVO PLUS control unit with T/H sensors, LCD temperature probe, SHT31 humidity sensor
  • Various accessories and spare parts: universal incubation baskets 38x35cm cod.42, plastic hatching drawer cod.CASS.PLAST.100-140, disposable paper mats CBUL30X40, complete plastic porthole 96/A, thermometer °F cod.05/A, hygrometer °F cod.25/A, cotton wick 1m, thermo-hygrometer cases cod.27, 3mm monofoam gasket cod.240, hinges cod.204, closing hooks cod.2.03.00.04/6
⚠️ FIEM MG140/200 Rural Compatibility: Spare parts for the MG140/200 Rural are designed specifically for this model and are NOT interchangeable with other FIEM models. The intermediate 140-egg capacity and 20mm insulated panels require components with precise dimensions, connectors, and electrical specifications. Always check the serial number on your incubator's nameplate. Contact us on WhatsApp for confirmation before purchasing.

✅ Why choose original FIEM MG140/200 Rural spare parts?

  • Certified compatibility: each piece is designed by FIEM specifically for MG140/200 Rural with 140 egg capacity, guaranteed installation without adaptations or modifications
  • Unaltered efficiency: vital parameters (temperature 37.7°C, humidity 47-62%, automatic rotation) maintained with the same precision as the first day
  • Longer lifespan: 5-8 years vs. 2-3 years for generic compatible spare parts, an investment that pays off over time for semi-professional incubators
  • CE certified safety: materials tested for 24/7 continuous use with 220W absorption, safe operation certified according to European regulations
  • Italian assistance: FIEM and Padovan Avicoltura technical support with 45 years of experience since 1980, specialized in Rural models
  • Guaranteed availability: FIEM keeps spare parts for the MG140/200 Rural available for over 10 years after the model's end of production.

📦 Shipping and warranty for MG140/200 Rural spare parts

All original FIEM spare parts for the MG140/200 Rural leave directly from the FIEM factory in Como with:

  • Fast 24-48h shipping: tracked express courier throughout Italy
  • 24-month warranty: full coverage against manufacturing defects for electrical and mechanical spare parts
  • Free returns within 14 days: if the replacement part is not compatible or you ordered by mistake
  • Professional packaging: shockproof protection for delicate components such as control units and sensors
  • Invoice and certificate: complete documentation for each order, guaranteed tax deductibility
Free shipping on orders over €50 for MG140/200 Rural spare parts. Shipping costs for orders under this amount are €6.90.

❓ Frequently asked questions about MG140/200 Rural spare parts

How do I know what resistor I need for the MG140/200 Rural?

The MG140/200 Rural uses only the 2-meter silicone heating element code R75H, 143W, 170 OHM/MT. Never use other models or generic heating elements: the 220W total power of the machine requires this specific heating element. Check the code on the heating element or contact us on WhatsApp with a photo of the label.

The egg turning motor is making a strange noise, should I replace it?

The complete gearmotor code 117/B for MG70-100-140-200-320 may develop noise after 3-4 years of heavy use. Before replacing it, check: gear lubrication, cleaning of organic residues, correct engagement of the egg turning bar code BAR140/200. If the noise persists with the bar disengaged, the motor should be replaced. Average lifespan: 5-7 years with semi-professional use.

Can I fit the EVO PLUS control unit to an old MG140/200 Rural?

Yes, the EVO PLUS control unit with 2.4" TFT color display is compatible with MG140/200 Rural models of any year, including previous versions with analog thermostats. Requires a complete kit: control unit code EVO PLUS + T/H probe code 27 + plastic front panel code FRONT.LCD E. + power cable. Professional installation recommended. Upgrade improves temperature accuracy ±0.1°C and automatic humidity management 20-99%.

How often should I replace the hygrometer wick?

The cotton wick (code 28) for the wet-bulb hygrometer should be replaced every 2-3 incubation cycles (about 60-90 days) for accurate humidity readings. Hard water hardens the wick, reducing absorption. Cut it into 10-12cm pieces and wet it thoroughly before fitting it onto the bulb. You can regenerate used wicks by soaking them for 2-3 hours in hot water mixed with 30% white vinegar, then rinse and reuse.

How long does the fan on the MG140/200 Rural last with weekly use?

The professional fan code 36 (10/20W 220V single-phase motor) + aluminum blade code 67 (234mm) lasts 8-12 years with weekly cycles. MG140/200 Rural allows speed adjustment: V3 maximum (incubation), V2 intermediate (hatching). Always use V3 when incubating 140 eggs. Maintenance: clean the blade every 3 months, check the self-cooling bearings, replace if abnormal vibrations occur. The protective net code V114F protects the fan from objects.

The float is leaking water, is this normal after 2 years?

No, water leaks from the red float (code 97G) indicate a malfunction. The MG140/200 Rural semi-automatic humidification system (BAC.10/45 tank + 5-liter tank (code 0083)) requires a functioning float to maintain a constant level. Common cause: limescale buildup blocks the mechanism. Solution: Remove the float, soak it for 2-3 hours in water plus 30% white vinegar, rinse, and reassemble. If the leak persists, replace the float. Preventive maintenance at the end of each cycle extends its lifespan to 5-7 years.

📞 WhatsApp technical support for the MG140/200 Rural

Not sure which spare part you need? The Padovan Avicoltura team has specialized in FIEM MG140/200 Rural incubators for 15 years.

Contact us on WhatsApp: +39 349 123 4567

We help you:

  • Identify the correct spare part by sending photos of the faulty component
  • Check compatibility with your MG140/200 Rural serial number
  • Receive video tutorials on installing complex spare parts (control unit, engine)
  • Diagnose incubation problems: unstable temperature, low humidity, eggs not turning
  • Customized quote for routine maintenance spare parts kits

🛒 Order your original FIEM spare parts for the MG140/200 Rural

Fast shipping from the Como factory • 24-month warranty • WhatsApp support included

Contact us now on WhatsApp or browse the spare parts catalog below ⬇️

Active filters

Power Cable for Automatic Humidification of Fiem Incubators
    FIEM

    Power Cable for Automatic Humidification of...

    €14.23
    Availability: 1000 In Stock

    🔌 The Automatic Humidification IEC Cable is the bridge that transforms your CipCip into a professional system with automatic humidity control!

    At €11.66 (excluding VAT) , the CAVO IEC+SCKH cable is the key element for connecting the automatic humidifier to your CipCip incubator. Equipped with a professional male IEC plug, it ensures a secure and stable connection between the ultrasonic nebulization system and the female IEC socket on the control unit.

    ⚠️ When do you need it? If you already have an ultrasonic humidifier but don't have a connection, if the existing cable is damaged, or if you're upgrading to a professional system.

    💡 *"A Treviso breeder with CipCip 40 has installed the automatic system: from 77 to 84% hatching rate! The secret? Constant humidity without continuous openings that previously caused fluctuations of 3-4°C!"*

    ✅ Compatible with all FIEM models with a female IEC socket suitable for connecting a humidifier. NOT compatible with Smart (different system).

    📱 ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't see the part you're looking for, please send us via WhatsApp : ✅A photo of the spare part you need ✅A photo of the incubator ✅A photo of the label on the back of the incubator ✅A description of the problem. This way we can help you more quickly. Thank you!

    🚚 Shipping from Como in 1 day. Minimum order €20. FIEM since 1975. 24-month warranty for private individuals, 12 VAT numbers.

    Fiem CIP Semi-Automatic Red Moisture Float CIP 40-MG50-MG70-MG100-MG140-MG200-MG320
      FIEM

      Fiem CIP Semi-Automatic Red Moisture Float CIP...

      €6.15
      Availability: 994 In Stock
      Red Water Float for Fiem Semi-Automatic Humidity Systems CIP 40-MG50-MG70-MG100-MG140-MG200-MG320 The automatic water level controller. This float regulates the flow of water into the humidity trays, maintaining the optimal level without manual intervention during incubation.

      When is it needed? If your float is stuck, no longer floats properly , or leaks water, it needs to be replaced. Even if you want to convert your CIP CIP from manual to automatic , this component is part of the automatic humidification kit.

      💰 Price: €5.04 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

      Minimum order €20: Complete with 5L tank (€8.82), water hose (€1.89/m) and other spare parts for a complete automatic humidity system.

      📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

      5 lt water tank for Fiem semi-automatic humidity kit for CipCip40-MG50-MG70-MG100-MG140-MG200-MG320
        FIEM

        5 lt water tank for Fiem semi-automatic...

        €10.76
        Availability: 998 In Stock
        5-Liter Tank for FIEM Semi-Automatic Humidity Kit – The external tank that frees you from the hassle of manual refilling. With a 5-liter water reserve, it ensures constant humidity for days without having to constantly open the incubator.

        A customer in Verona incubated pheasant eggs but worked away from home all day: "I come home in the evening and the water has evaporated, I have to open the door every day and lower the temperature." She installed the semi-automatic kit with this 5L tank, and the problem was solved: "Now I fill it once a week."

        When do you need it? If you want to convert your incubator from manual to semi-automatic , this tank is the heart of the system. It can also be used to replace a damaged, cracked, or lost tank .

        💰 Price: €8.82 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

        Complete system: Tank (€8.82) + 97G Float (€5.04) + 10mm Tube (€1.89/m) + Bushing (€0.84) = Automatic humidity kit.

        Minimum order €20: Perfect for ordering the complete semi-automatic kit.

        📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

        Fiem Semi-Automatic Humidity System Connection Pipe
          FIEM

          Semi-automatic Humidity System Connection Tube...

          €2.31
          Availability: 998 In Stock
          Semi-Automatic Humidity System Connection Tube – The vital link between the external tank and the incubator. This food-grade PVC tube transports water from the tank to the trays, ensuring constant humidity without manual intervention.

          A customer had installed the automatic kit with a hose from the hardware store: after a short time, it hardened, lost its grip, and water began to drip. Replaced with the original FIEM hose, no problems in 3 years of intensive use.

          When do you need it? To install the semi-automatic humidity kit or to replace an old, hardened, or leaky hose . Even if you want to extend the connection to position the tank further away.

          💰 Price: €1.89 per meter (excluding VAT, shipping) – FIEM WAREHOUSE COMO

          Universal Compatibility:

          Recommended installation length: 1-1.5 meters for standard installation (close to tank). 3 meters for more distant installations.

          Minimum order €20: Order the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84 for 1.5m) + Bushing (€0.84).

          📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

          Fiem Control Unit Single Pole Switch (General, Light, Egg Turner)
            FIEM

            Single-Pole Switch for Fiem Control Unit -...

            €0.65
            Availability: 1000 In Stock
            RL 34 Single-Pole Switch for FIEM Control Units – The on/off switch for control units. This switch allows you to manually turn the control unit on and off, ensuring direct control over the system's power supply.

            A customer from Verona called me: "The control unit no longer turns on, the LED remains off." Upon checking, the switch had become stuck in the middle position and was no longer making contact. I replaced the RL 34 switch within 10 minutes, and the control unit was fully functional again.

            When is it needed? If the switch is stuck, no longer makes contact, produces sparks , or you have to press it several times before it works, it should be replaced. Even if it's visibly damaged, broken, or burned.

            💰 Price: [INFORMATION TO BE VERIFIED] (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

            Compatibility: FIEM control units (MiniLED, Advanced and digital models).

            Minimum order €20: Add other electrical spare parts (fuse €0.42, resistor €12.18, thermometer €22.05).

            📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

            UB-1500 Plastic Bushing for Fiem Ultrasonic Humidifier Inlet Tube - Original Fiem Spare Parts
              FIEM

              UB-1500 Plastic Bushing for Fiem Ultrasonic...

              €1.02
              Availability: 1000 In Stock
              FIEM UB-1500 Plastic Bushing for Humidity System Pipe Inlet – A safe passage for the water pipe. This plastic bushing fits into the incubator's hole, allowing the humidity system pipe to pass from the outside to the inside, protecting the pipe from wear and ensuring a proper seal.

              When is it needed? To correctly install the semi-automatic humidity kit , to replace a broken or lost bushing , or if the tube passes through the hole without protection, risking abrasion.

              💰 Price: €0.84 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

              Compatibility: All FIEM incubators with semi-automatic humidity system (CIP CIP 28/40, MG series). Also compatible with FIEM ultrasonic humidifiers.

              Minimum order €20: Perfect in the complete kit: 5L tank (€8.82) + Float (€5.04) + Tube (€2.84) + Bushing (€0.84) = €17.54.

              📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

              Temperature Probe for Old Fiem LCD Control Unit

                Temperature Probe for Old Fiem LCD Control Unit

                €16.72
                Availability: 1000 In Stock
                LCD Thermostat Temperature Sensor (old) – The sensor that detects the incubator's internal temperature and allows the LCD thermostat to regulate the heating. This critical component constantly transmits temperature data to the thermostat to maintain the incubator at 37.5-37.7°C.

                When is it needed? If the LCD control unit displays an incorrect or fixed temperature , or the internal temperature fluctuates too much . Even if you see "Err" or "---" on the display, or if the heating element remains always on or always off, ignoring the actual temperature.

                Symptoms of a faulty probe: Displayed temperature stuck on one value, impossible readings, resistor that never turns on or off, sudden temperature fluctuations.

                💰 Price: €13.70 each (excluding VAT, excluding transport) – FIEM WAREHOUSE COMO – Only original FIEM components from Padovan Avicoltura for guaranteed efficiency over time.

                ⚠️ OLD Version: This probe is for older models with LCD control units. Newer models with MiniLED Advanced or other modern control units use different probes (T/H PROBE).

                Compatibility: MG Series (older LCD models) and CIP CIP (older LCD models). Please check that your incubator has the old LCD control unit before ordering.

                Minimum order €20: Consider ordering at least 14 probes (€20.58) as a backup for future replacements, or supplement with other spares (fuse, thermometer, trays).

                📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT number. FIEM since 1975.

                Fiem Pro Hatch / Remote Control / Remote Control
                • -€70.00
                FIEM

                Fiem Pro Hatch / Remote Control / Remote Control

                €189.00 €119.00 -€70.00
                Availability: 29 In Stock

                🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
                Only €119 instead of €189 – €70 savings

                🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
                "Temperature dropped to 36.8°C – intervention required."

                Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

                This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

                🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

                Why thousands of farmers will no longer be able to do without it

                • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
                • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
                • ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
                • 🏠 Manage multiple incubators – One app for your entire fleet of machines
                • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

                Compatibility

                ✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

                Launch offer – Valid until stocks last (30 pieces)

                MORE INFO? Read the description below

                FIEM PRO-HATCH WiFi Module + Lifetime App Access
                €119.00 €189.00

                🔥 ONLY 30 PIECES AT THIS PRICE 🔥
                Front Panel for Miniled, Miniled Advanced, Evo Plus + Graphic Membrane
                  FIEM

                  Front Panel for Miniled, Miniled Advanced, Evo...

                  €20.25
                  Availability: 1000 In Stock

                  ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                  🖥️ The communicative face of your incubator.
                  When the controls no longer respond, the writing is faded or the opaque plastic hides the functions, there is no need to change the entire control unit: just give it a new face: Front Panel For Miniled, Miniled Advanced, Evo Plus + Graphic Membrane

                  Quick diagnosis: If you notice worn buttons, scratches that make the displays illegible, or membranes that don't respond to touch, the problem is almost always this front panel. People often think they need to replace the entire control unit, but the internal "brain" works perfectly: it's just the external interface that has failed.

                  Complete solution: original FIEM kit with rigid plastic front panel + graphic membrane with conductive contacts. Compatible with MiniLED, MiniLED Advanced, and Evo Plud on all FIEM incubators equipped with these control units.

                  Check before ordering:
                  ✓ Display works but controls are unresponsive
                  ✓ MiniLED or MiniLED Advanced or Evo Plus control unit
                  ✓ intact rear hooks

                  ⚠️ When to replace it: at the first signs of wear. Waiting risks setting errors that compromise your hatching.

                  Essential data:
                  💶 Price: €16.60 + VAT
                  🔧 Compatibility: All FIEMs with MiniLED/MiniLED Advanced/Evo Plus (specify model in order)
                  🏷️ Code: FRONT.MINILED/ADVANCED/EVOPLUS
                  📦 Availability: IN STOCK – 24-hour shipping from Fiem warehouse in Como

                  Doubts about compatibility?
                  Send me 3 photos (incubator, panel, tag) on WhatsApp:
                  📱 351 881 9586

                  📌 Scroll below for technical guidance, compatibility chart, and assembly.

                  ABS Cover for Fiem Control Panel

                    ABS Cover for Fiem Control Panel

                    €21.35
                    Availability: 1000 In Stock

                    ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                    🛡️ The protective shield of the electronic brain.
                    When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

                    Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

                    Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

                    📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

                    ⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

                    Essential data:
                    💶 Price: €17.50 + VAT
                    🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
                    🏷️ Code: FIEM-COP.SC14
                    📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

                    Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

                    💬 Minimum order €20 (VAT excl.)

                    Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

                    • ✓ 🔍 Precise search for spare parts
                    • ✓ ✅ Check component integrity before departure
                    • ✓ 📦 Reinforced protective packaging
                    • ✓ 📝 Accounting management and tracking

                    📌 Scroll below for a complete guide, compatibility, and installation.

                    Support Foot for Fiem Incubators - Original Fiem Spare Parts
                      FIEM

                      Support Foot for Fiem Incubators

                      €0.73
                      Availability: 200 In Stock

                      ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                      🦶 The foot that keeps the machine stable and level.
                      When the foot is broken, worn or missing, the incubator no longer sits level causing abnormal vibrations and the fan gets damaged.

                      Quick diagnosis: unstable incubator, oscillations during the cycle, broken or worn foot. A small but essential component for proper operation.

                      Solution: Original FIEM foot made of impact-resistant, non-slip plastic. Compatible with all FIEM models. Lifespan: 5–8 years with normal use. Replace all 4 for consistency.

                      ⚠️ When to replace it: if broken, worn out, or the incubator is no longer level.

                      Essential data:
                      💶 Price: €0.60 + VAT (single sale)
                      🔧 Compatibility: All FIEM models
                      🏷️ Code: V284
                      📦 Availability: IN STOCK – 24h shipping (railway) from Como, delivery 2/4 days.

                      Any questions? WhatsApp me: 351 881 9586

                      💬 Minimum order €20 (VAT excl.)

                      Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

                      • ✓ 🔍 Precise search for spare parts
                      • ✓ ✅ Check component integrity before departure
                      • ✓ 📦 Reinforced protective packaging
                      • ✓ 📝 Accounting management and tracking

                      📌 Scroll below for full compatibility and fitment.

                      2 Amp Glass Fuse for Fiem Incubators
                        FIEM

                        2 Amp Glass Fuse for Fiem Incubators

                        €0.51
                        Availability: 986 In Stock

                        ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                        🛡️ The fuse that sacrifices itself to save the control unit.
                        When it blows, it protects your board and expensive components from overloads or short circuits that could damage them beyond repair.

                        Quick diagnosis: Incubator completely off, black display, no power. Always check the fuse before considering more serious problems.

                        Solution: Original FIEM 2A (ampere) 5x20mm fuse. Replace only with a fuse of the same amperage for safety. Always keep spare fuses on hand.

                        ⚠️ When to replace it: if the incubator no longer turns on or if you notice the internal filament is broken.

                        Essential data:
                        💶 Price: €0.42 + VAT (each)
                        🔧 Compatibility: All FIEM models with 2A 5x20mm fuse
                        🏷️ Code: CF521220
                        ⚡ Specifications: 2 Ampere, 250V, 5x20mm
                        📦 Availability: IN STOCK – Shipping within 24 hours (railways)

                        Questions? WhatsApp: 351 881 9586

                        💬 Minimum order €20 (VAT included)

                        For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

                        Why? Lower prices do not cover: replacement part sourcing, quality control, packaging, order processing, and accounting. 📌 Scroll down for compatibility and replacements.

                        5x20 panel fuse holder
                          FIEM

                          FIEM 5x20 panel fuse holder

                          €0.77
                          Availability: 1000 In Stock

                          ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                          🔒 The fuse holder that keeps the contacts always clean and safe.
                          When broken, oxidized, or with loose contacts, the fuse no longer makes contact, causing intermittent malfunctions.

                          Quick diagnosis: incubator turning on and off by itself, fuse overheating, blackened or corroded contacts. Small but critical component for safe power supply.

                          Solution: Original FIEM fuse holder with nickel-plated brass contacts. Guarantees perfect sealing and optimal conduction. Lifespan: 10+ years in normal use.

                          ⚠️ When to replace it: if you notice oxidized contacts, a hot fuse, or intermittent operation of the incubator.

                          Essential data:
                          💶 Price: €0.63 + VAT (each)
                          🔧 Compatibility: All FIEM models with standard fuse holder
                          🏷️ Code: ITWHK52001
                          📦 Availability: IN STOCK – Shipping within 24 hours (railways)

                          Questions? WhatsApp: 351 881 9586

                          💬 Minimum order €20 (VAT included)

                          For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

                          Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

                          📌 Scroll below for compatibility and replacements.

                          Fiem Anti-Condensation Humidity Probe Protection Case
                            FIEM

                            Fiem Anti-Condensation Humidity Probe...

                            €3.54
                            Availability: 999 In Stock

                            💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

                            The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

                            🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

                            ⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

                            💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

                            ✅ Compatible with FIEM humidity probes .

                            📱 Problems with humidity readings? Send photos on WhatsApp

                            🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

                            Fiem cable gland
                              FIEM

                              Fiem cable gland

                              €2.93
                              Availability: 1000 In Stock

                              ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                              🔒 The safe passage that protects cables from tension and humidity.
                              When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

                              Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

                              Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

                              ⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

                              Essential data:
                              💶 Price: €2.40 + VAT (each)
                              🔧 Compatibility: All FIEM models with PG16 hole
                              🏷️ Code: REISTPG16
                              📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
                              📦 Availability: IN STOCK – Shipping within 24 hours (railways)

                              Questions? WhatsApp: 351 881 9586

                              💬 Minimum order €20 (VAT included)

                              For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

                              Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

                              📌 Scroll below for compatibility and fitment.

                              Fiem ML-Advanced and EvoPlus Central Temperature and Humidity Probe COMPLETE
                                FIEM

                                Fiem ML-Advanced and EvoPlus Central...

                                €51.85
                                Availability: 499 In Stock

                                ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

                                🌡️ Digital eyes that read temperature and humidity to the nearest tenth of a degree.
                                The T/H probe is the combined sensor that detects temperature and relative humidity inside the incubator. It sends the data to the EVO Plus or MiniLed Advanced control unit, which adjusts heating and humidification accordingly.

                                Available in the sensor-only version or complete with sensor + protection + cable

                                Quick diagnosis: display showing "ERR" or asterisks (**), incorrect readings, temperature or humidity not matching the control thermometer, frozen values.

                                Solution: Original FIEM Temperature/Humidity probe for EVO Plus and MiniLed Advanced control units.

                                Slight decimal fluctuations are within the normal characteristics of this type of sensor.

                                ⚠️ When to replace it: If the probe isn't working, the control unit can't properly regulate temperature and humidity. The incubator will operate "blind," and you risk losing the entire brood.

                                Essential data:
                                💶 Price: €42.50 + VAT
                                🔧 Compatibility: COSMO EVO Plus, COSMO ML (MiniLed Advanced)
                                🏷️ FIEM Code: EVOPLUS/ML T/H PROBE (sensor or complete)
                                📋 Exploded view ref.: Varies depending on the model
                                📦 Availability: IN STOCK – Shipping within 24 hours (weekdays)

                                Questions? WhatsApp: 351 881 9586

                                📌 Scroll below for full compatibility, fitment, and related parts.

                                Mg 100/150 Buon rapporto qualità/prezzo
                                Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

                                Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

                                By Temistocle M. the 06/26/2025 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
                                Report an abuse
                                Qualità
                                Qualità

                                Qualità prodotti ottima

                                By Salvatore C. the 06/04/2025 - This review was helpful 0 - 0 You've already voted
                                Report an abuse
                                Guida calibrazione e ordini
                                🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

                                Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

                                By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 0 You've already voted
                                Report an abuse
                                Buona incubatrice familiare!
                                Qualità

                                Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

                                By the 01/24/2025 - This review was helpful 0 - 1 You've already voted
                                Report an abuse
                                ncubatrice per Allevatori Seri
                                Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

                                lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

                                By Paolo C. the 01/23/2025 - Incubatrice FIEM.. This review was helpful 0 - 0 You've already voted
                                Report an abuse
                                Giuda interessantissima
                                🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

                                Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

                                By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 1 You've already voted
                                Report an abuse
                                Giuda indispensabile
                                🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

                                Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

                                By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte.. This review was helpful 0 - 1 You've already voted
                                Report an abuse
                                Incubatrice Fiem MG 140/200: Qualità e Affidabilità
                                Qualità

                                Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

                                By the 09/19/2024 - This review was helpful 0 - 0 You've already voted
                                Report an abuse
                                Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza
                                Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

                                Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

                                By Antonio F. the 09/15/2024 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
                                Report an abuse
                                Ottimo omaggio

                                Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

                                By the 09/13/2024 - This review was helpful 0 - 0 You've already voted
                                Report an abuse

                                Questo sito utilizza cookie per garantire una navigazione ottimale.