ABS CO2 EXPULSION SHUTTER ((MG 50-70-100-140-200)

A customer from Padua called me on the 10th day of incubation: the temperature was constantly fluctuating between 36°C and 36.2°C. After checking, the heating element had lost electrical continuity in one spot. I urgently replaced it with the original FIEM R75E, the temperature stabilized immediately, and the eggs hatched successfully.

When is it needed? If your incubator never reaches the set temperature , or takes too long to heat up, or if the thermostat is always on but the heat doesn't increase, the heating element is probably faulty. Abnormal temperature fluctuations can also indicate a damaged heating element.

⚠️ Before ordering: Unplug the power cord, disconnect the resistor, and measure the electrical resistance with a tester : it should read approximately 505 Ohms (2.06 m × 245 Ohms/m). If it reads "infinity" or significantly different values, the resistor is broken. Also check that there are no cuts, burns, or blackened spots on the wire.

📸 Don't have a tester? Send us a photo of the installed resistor on WhatsApp and describe the incubator's behavior: we'll help you diagnose it before purchasing.

Installation: Electrical work that requires care. Always unplug the appliance and, if you are unfamiliar with electrical connections, consult a qualified technician.

💰 Price: €12.18 (VAT excluded, shipping excluded) – FIEM WAREHOUSE COMO

Compatibility: Both the CIP CIP 28 and CIP CIP 40 models use the same R75E resistor.

Minimum order €20: Add other useful spare parts (fuse, fixing collars, thermometer) to complete the order.

📦 Logistics: Ships in 1 business day, delivery 2-4 days. Warranty: 24 months for private individuals / 12 months for VAT numbers.

When is it needed? If the trays move, wobble, or don't stay in place , the metal support is probably warped or bent. Even when replacing the trays themselves, always check the condition of the support.

💰 Price: €4.50 (excluding VAT, shipping) – FIEM WAREHOUSE COMO

⚠️ ATTENTION: This support is specific for CIP CIP 28. The CIP CIP 40 model has a different support (SUPP.BAC.CIP40).

Minimum order €20: Add 350 TOP trays (€1.30 × 2), thermometer (€22.05) or other spare parts.

📦 Logistics: 1-day shipping, 2-4 day delivery. Warranty: 24 months for private individuals / 12 months for VAT numbers.

✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

📌 Scroll below for full compatibility, fitment, and related parts.

Spare Parts and Exotic Options Fiem set of cylindrical inserts (10 pcs.) egg voltage + aluminum trolley MG50 COLIBRI

The new professional and versatile incubation and hatching tray for the MG50 BIRD/COLIBRÌ incubators is specifically designed for incubating exotic and ornamental animal eggs and, thanks to its removable and adjustable segments, can accommodate eggs of a wide variety of sizes. Also available in a professional version.

Please make sure to check if the part you need matches the image. If you have any doubts or can't find the part you're looking for, please send us a photo of the part you need via WhatsApp. Thank you.

Original spare parts for Fiem incubators from Padovan Avicoltura : Single-pole switch. Only at Padovan Avicoltura can you find efficient pre- and post-sales service and guaranteed spare parts.

Original Fiem spare parts : Plastic cover for hatching drawer Fiem MG244-316-300-320 incubator S316 hatching

To be combined with plastic hatching drawer (code CASS.56020001)

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

Kit to convert your Fiem mg 100/150 incubator from weekly to single-batch. You can choose the specific incubation tray for each breed during the purchase process by specifying in the notes. (Universal, geese, quail, pheasant).

Only at Padovan Avicoltura can you find all original Fiem spare parts.

Emu egg tray for FIEM's Ostrich series. Available in a 9-seater version.

One special removable drawer for Fiem beekeeping incubators: easy replacement, maximum hygiene and safety. (Cell holders not included)

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.

The 3mm thick x 1m MONOFOAM gasket is an essential component for ensuring a perfect hermetic seal in Fiem incubators. Thanks to its foam structure, it helps prevent heat loss , improving incubation efficiency and maintaining optimal environmental conditions.

✔ 3mm thickness for excellent grip
✔ Easy to install and fit
✔ Prevents heat and humidity loss
✔ Compatible with various Fiem incubator models

By purchasing this product, you choose original Fiem spare parts , perfectly compatible with your incubator.

ATTENTION: Please carefully check that the spare part matches the image. If you have any questions or don't find the part you're looking for, please contact us via WhatsApp :
✅ A photo of the required spare part
✅ A photo of the incubator
✅ A photo of the label on the back of the incubator
This way we can help you more quickly. Thank you!

New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).

Original spare parts for Fiem incubators from Padovan Avicoltura : Kit with 3 20 mm membranes + key for ultrasonic membrane humidifier . Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

Discover the Q10 mesh shelf with stainless steel frame for the G316 germinator: resistant, practical and perfect for growing sprouts optimally.

Please make sure to check if the part you require matches the image. If you have any doubts or cannot find the part you are looking for, please send us a photo of the part you need via WhatsApp. Thank you.