FIEM MG 720-1300-2500-6100 Accessories and Spare Parts

FIEM MG 720-1300-2500-6100 Accessories and Spare Parts

Original FIEM Spare Parts and Accessories for the MG 720 - MG 1300 - MG 2500 Professional Series

Need a part for your FIEM professional incubator? We sell only original FIEM spare parts for the MG 720 Pegaso, MG 1300 S ECO, and MG 2500 S ECO models. Each part has been developed by the manufacturer to ensure the proper functioning of your machine. Not sure which component to order? Contact us on WhatsApp at 📱 +39 3518819586 Send us four photos: a complete view of the incubator, the identification plate, the damaged component, and an explanation of the problem. We'll verify the correct code and immediate availability together.
⚠️ Attention Model Compatibility
Spare parts for the MG 720, MG 1300, and MG 2500 have different technical specifications. A component designed for the MG 720 may not be compatible with the MG 2500, and vice versa. Before ordering, always check the exact model on the nameplate of your incubator or contact us to confirm compatibility.

🔧 Spare Parts Available by Category

🌡️ Temperature and Humidity Regulation

⚡ Electronic Troubleshooting
Before purchasing expensive electronic components: unplug the power supply, wait at least 60 seconds, reconnect, and restart. This complete reset procedure resolves many temporary ECU lockouts without the need for replacement.
  • EVO PLUS control unit with integrated temperature/humidity sensors: Digital control unit with 2.4-inch TFT color display, advanced parameter management and time slot programming
  • Professional self-calibrating temperature sensor: ±0.1°C accuracy for high-quality PID thermoregulation
  • Professional humidity sensor: Accurate sensing with ±1.5% RH accuracy for optimal climate control
  • Analog thermometer °F: visual temperature control using an alcohol column, Fahrenheit graduation
  • Wet Bulb Hygrometer °F: relative humidity measurement with controlled evaporation system
  • Electromechanical thermostat maximum alarm: Over-temperature protection with acoustic and visual signal, automatic heating lock

🔄 Automatic Egg Turning Mechanism

  • Professional electric egg turning actuator: Timed gearmotor for programmed rotation of incubation trays
  • Metal tray holder structures: Steel frames for housing baskets on multiple levels (model-specific configuration)

🔥 Heating and Ventilation System

  • Silicone resistance cable: heating element protected by silicone rubber, different power levels available (710 W for MG 720/1300, 1000 W for MG 2500)
  • Self-cooling bearing fan (MG 720 / MG 1300): Professional fan motor with speed regulation, long-lasting bearings
  • GreenTech EC electronic fan (MG 2500): new generation energy-saving technology, higher efficiency and longer lifespan
  • Aluminum fan blades: metal impellers with calibrated blade angle for uniform air distribution

💡 Preventive ventilation maintenance: Clean the fan and blades regularly with compressed air to remove lint and debris. If you notice unusual noises, spray the bearings with lubricant before considering a complete replacement.

🛠️ Structural Components

  • Thermal insulating panels: pre-painted galvanized sheet metal walls with 20 mm polystyrene insulation
  • Doors and inspection windows: doors with thermal seals and transparent windows for internal control
  • Thermal seals: insulating cords for thermal sealing of doors and joints
  • Hinges and closures: metal hardware for anchoring and locking doors
  • Ventilation regulation shutters: adjustable valves for air exchange control and CO₂ expulsion

⚡ Electrical Components

  • Single-phase power cables: 220-240 V ~ 50/60 Hz electrical cords with SCHUCKO plugs
  • Panel connectors and sockets: IEC connections for connecting accessories and humidifier
  • LED interior lighting: 3-4 W energy saving light bulbs with E14 fitting
  • Fuse holders and protection fuses: electrical safety devices for circuit overload
  • Acoustic alarm battery: autonomous power supply, fault reporting system
  • Cable glands for wiring passage: Skintop rings for cable entry on panels

💧 Humidification and Water Supply

  • Ultrasonic humidifier 1 membrane (MG 720 / MG 1300): Automatic digital nebulizer with RH% 20-99% adjustment
  • 3-membrane ultrasonic humidifier (MG 2500): professional high-capacity system for large volumes
  • Constant level stainless steel humidity tanks: containers with automatic float and protective lids
  • External water reserve tanks: storage tanks for continuous water system supply
  • Floats and constant flow valves: automatic water level regulators
  • Flexible water connection pipes: Ø 10 mm pipes for water distribution

🥚 Incubation and Hatching Accessories

  • Professional high density cellular baskets: Stackable plastic trays for different types of eggs (72 chicken, 98 pheasant, 126 partridge, 170 quail, 50 turkey, 50 duck, 28 goose)
  • Pull-out trolleys with hatching baskets: mobile structures with stackable perforated baskets and metal mesh lids
  • Disposable absorbent paper baskets: bottom protection sheets during hatching

⭐ Recommended Professional Accessories

AccessoryUsageCompatibility
Power Lux Egg Candling MachineEgg fertility check with cold light, magnifying glass and adapter ringAll models
Modular artificial breederWeaning of newborn chicks with adjustable heating, modular up to 4 levelsPost-hatching use
Additional thermometers and hygrometersCross-check temperatures and humidity for greater precisionAll models
Water mains connection kitDirect water supply from tap with pressure reducerMG 1300 / MG 2500

✅ Advantages of Original FIEM Spare Parts

🎯 Manufacturer Certified Compatibility
Each FIEM spare part has a unique code verified for your specific model. FIEM has been manufacturing incubators since 1975 and maintains comprehensive technical archives for every component used in the various production series.

🎚️ Technical Specifications Identical to the Original
A 710W heating element for the MG 1300 delivers the exact heat output designed for the heater, without the risk of underheating or excessive consumption. The GreenTech EC fan for the MG 2500 delivers the same factory-calibrated airflow.

💪 Reliability Tested in Real-World Conditions
FIEM components pass continuous cycle endurance tests: EVO PLUS control units validated for thousands of starts, fans tested for continuous seasonal operation, sensors verified in high-humidity environments.

🛡️ Compliance with Applicable Regulations
Where required by European regulations for electrical devices, spare parts comply with current CE directives. Technical documentation is kept at FIEM for inspection.

👨‍🔧 Manufacturer Technical Support
By purchasing original FIEM products, you gain access to direct assistance from the Guanzate factory: 50 years of experience in designing professional incubators. Padovan Avicoltura has been working with FIEM since 1980.

📅 Extended Component Availability
FIEM guarantees the supply of key spare parts for several years after a model is discontinued, allowing you to keep your incubator operational even after a long period of time.

📦 Logistics and Commercial Conditions

🚚 Direct Shipping from FIEM Factory
All original components are collected from the FIEM warehouse in Guanzate (Como) and shipped via tracked courier. Average delivery times in Italy are 2-4 business days from collection. You will receive an email notification with a tracking number to track your package.

🔒 Differentiated Warranty on Manufacturing Defects
FIEM spare parts are guaranteed against manufacturing defects: 12 months for VAT numbers, 24 months for private consumers from the invoice date. Keep the FIEM transport document, which is the official document for activating the warranty in the event of a defective component.

💬 Minimum Order and Logistics Management

We request a Minimum order of €20 (excluding shipping) to cover the fixed costs of each individual order:

  • Targeted warehouse search: Locate the specific component among thousands of available spare parts codes
  • Professional shockproof packaging: adequate protection for delicate components such as electronic control units and sensors
  • Complete administrative management: issuing invoices, guarantee delivery notes, tax registration
  • Shipping coordination: Booking of courier collection and sending of tracking to the customer

💡 Operational tip: If you plan on future maintenance or have multiple components to replace, order all the necessary parts together. For example, a thermometer, temperature sensor, and spare fuses easily exceed the minimum threshold, and you'll have everything available for quick repairs.

🧰 Recommended Preventive Maintenance

  • 🌡️ Check sensor calibration: Compare the temperature detected by the EVO PLUS control unit with the analog thermometer every start of the season. If the deviation exceeds 0.5°C, access the settings menu and correct the offset as indicated in the user manual.
  • 💧 Cleaning the humidification circuit: Every 10-15 incubation cycles, completely empty the tanks and clean them with water and white vinegar to remove limescale deposits. Rinse thoroughly before reusing.
  • 🔄 Egg turning actuator lubrication: If the electric actuator begins to slow down or makes noises, apply a few drops of technical lubricant to the visible moving parts. Rotate it by hand to distribute the product before restarting.
  • 🔥 Heating element inspection: Visually inspect the silicone cable for abrasions, cuts, or blackened areas. A damaged cable can cause electrical leakage or malfunctions and should be replaced immediately.
  • ⚡ Electrical protection tests: Before starting the incubation season, check that the protection fuse and the maximum temperature alarm thermostat are working correctly by following the procedures in the manual.

💼 Field Experience: A breeder in Lombardy reported unstable temperatures on his MG 2500. Before suggesting costly replacements, we advised him to check the ventilation shutters: they were partially blocked by dust and fluff. After a thorough cleaning with compressed air, the temperature stabilized perfectly. This type of preventive diagnosis is part of the service we offer: finding the simplest and most cost-effective solution first.

❓ Frequently Asked Questions

How can I identify the model of my FIEM incubator with certainty?
The identification plate is located on the side of the machine and lists the exact model (e.g., MG 720 Pegaso), serial number, power supply voltage, and total power. If the plate is illegible, measure the incubator's external dimensions and compare them with the specifications: MG 720 is 880x885x1420H mm, MG 1300 is 880x885x1700H mm, MG 2500 is 1450x860x1800H mm.

My incubator's fan is noisy but still works: should I replace it immediately?
It depends on the type of noise. A slight hum is normal. If you hear progressively louder squeaking or metallic grinding, the bearings are worn and should be replaced before the fan stops completely. In the meantime, clean with compressed air and lubricate: this often temporarily reduces the noise.

Can I install components from different models on my incubator to save money?
We strongly advise against this practice. A MG 1300 fan may have insufficient airflow for a MG 2500, resulting in inadequate heat distribution. An incorrect resistor can lead to underheating or excessive power consumption. Always use components specified for your specific model.

💬 Need help finding the right part? Avoid order errors that cause wasted time. Message us on WhatsApp at 📱 +39 3518819586 Send us four photos: the complete incubator, the identification plate, the component to be replaced, and a description of the problem. We will confirm the correct spare part code and verify its immediate availability in the FIEM warehouse within a few hours.

Sources: FIEM catalog "ASTRALE - The Sureness to Rely Upon Experience" February 2025 edition, pages 4-11 (technical specifications MG 720 Pegaso, MG 1300 S ECO, MG 2500 S ECO); FIEM spare parts list 2025 (common component codes for professional series); Padovan Avicoltura operating experience in the FIEM incubator assistance sector (1980-2025).

Active filters

Fiem Pro Hatch / Remote Control / Remote Control
  • -€70.00
FIEM

Fiem Pro Hatch / Remote Control / Remote Control

€189.00 €119.00 -€70.00
Availability: 29 In Stock

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

🛑 Imagine this: you're at work, traveling, or just on the couch... and you get a notification:
"Temperature dropped to 36.8°C – intervention required."

Rushing home? No. You open the app, see that the heating has restarted automatically after a micro-blackout, everything returning to 37.5°C in 3 minutes. You get back to what you were doing.

This isn't science fiction. It's the new FIEM PRO-HATCH 2025, and as part of the launch offer, you can get it for just €119 instead of €189 .

🔥 Only 30 pieces available at this price . When they run out (and they will run out very soon), the price goes back to €189.

Why thousands of farmers will no longer be able to do without it

  • 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
  • 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
  • ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
  • 🏠 Manage multiple incubators – One app for your entire fleet of machines
  • 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

FIEM PRO-HATCH WiFi Module + Lifetime App Access
€119.00 €189.00

🔥 ONLY 30 PIECES AT THIS PRICE 🔥
ABS Cover for Fiem Control Panel

    ABS Cover for Fiem Control Panel

    €21.35
    Availability: 1000 In Stock

    ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

    🛡️ The protective shield of the electronic brain.
    When it has cracks, damaged screw seats or deformations, the control unit is exposed to dust and impacts that compromise incubation.

    Quick diagnosis: enlarged screw holes, yellowed plastic, loose cover, or heat deformation. Mechanical protection is often overlooked, but even dust or a single impact can damage expensive electronics.

    Solution: Original FIEM gray ABS cover for MiniLED, MiniLED Advanced, and EVO Plus. Fixing with 4 screws. Lifespan: 8–10 years in normal use.

    📌 Real case: Breeder from Padua with an MG100, cover with two broken screw holes. Dust was getting into the circuits. Replaced in 5 minutes, problem solved.

    ⚠️ When to replace it: at the first signs of damage. Waiting risks leaks that damage the control unit (costing 10 times more).

    Essential data:
    💶 Price: €17.50 + VAT
    🔧 Compatibility: FIEM with MiniLED/MiniLED Advanced/EVO Plus (CIP CIP 28/40, INCA, MG50-140, hatches)
    🏷️ Code: FIEM-COP.SC14
    📦 Availability: IN STOCK – 24-hour shipping (railway) from Como

    Any questions? Send me 3 photos (incubator, tag, painting) on WhatsApp: 351 881 9586

    💬 Minimum order €20 (VAT excl.)

    Why this threshold? Lower prices don't allow us to cover the out-of-pocket costs of quality we guarantee for every single piece.

    • ✓ 🔍 Precise search for spare parts
    • ✓ ✅ Check component integrity before departure
    • ✓ 📦 Reinforced protective packaging
    • ✓ 📝 Accounting management and tracking

    📌 Scroll below for a complete guide, compatibility, and installation.

    Fiem Anti-Condensation Humidity Probe Protection Case
      FIEM

      Fiem Anti-Condensation Humidity Probe...

      €3.54
      Availability: 999 In Stock

      💧 The humidity sensor cover is essential protection that keeps the humidity sensor safe from the harsh incubator environment! (dust, washing, etc.)

      The CUST.S.UMID protects the delicate humidity probe from the extreme conditions inside the incubator: constant high humidity, heat, and possible splashes of water when filling the trays. Without this protective case, the probe rapidly deteriorates, compromising the vital 47-62% humidity readings required for the various phases.

      🛡️ This case allows the sensor to properly detect humidity while protecting it from physical damage and excessive condensation. It is designed with calibrated openings that allow humid air to pass through for measurement, but prevent direct water from entering.

      ⚠️ When should you replace it? If it has cracks or breaks, if it no longer protects the probe adequately, if it is deformed by heat, if the openings are blocked by deposits, or if it is missing after humidity probe maintenance.

      💡 A damaged case exposes your expensive humidity probe to premature failure. It's better to invest in a new case than to have to replace the entire probe!

      ✅ Compatible with FIEM humidity probes .

      📱 Problems with humidity readings? Send photos on WhatsApp

      🚚 Shipping from Como in 1 day. FIEM since 1975 , protection for sensitive components. 24-month warranty for private individuals, 12 VAT numbers.

      Fiem cable gland
        FIEM

        Fiem cable gland

        €2.93
        Availability: 1000 In Stock

        ✅ Original FIEM 🚚 24h Shipping 🇮🇹 Italian assistance ⭐ 45 years of experience

        🔒 The safe passage that protects cables from tension and humidity.
        When damaged, broken, or missing, cables are exposed to water and dust ingress, causing short circuits.

        Quick diagnosis: broken cable gland, damaged thread, hardened gasket that no longer holds watertight. A small but essential component for electrical safety.

        Solution: Original FIEM PG16 Skintop cable gland in reinforced nylon with IP65 gasket. Guarantees watertightness and mechanical protection for cables. Lifespan: 10+ years.

        ⚠️ When to replace it: If you notice a hardened gasket, damaged threads, or a loss of watertightness.

        Essential data:
        💶 Price: €2.40 + VAT (each)
        🔧 Compatibility: All FIEM models with PG16 hole
        🏷️ Code: REISTPG16
        📏 Specifications: PG16, IP65, nylon, cable Ø 6-12mm
        📦 Availability: IN STOCK – Shipping within 24 hours (railways)

        Questions? WhatsApp: 351 881 9586

        💬 Minimum order €20 (VAT included)

        For orders under €20 including VAT, reach the minimum amount by adding additional items to your cart.

        Why? Lower prices don't cover: finding replacement parts, quality control, reinforced packaging, and order processing.

        📌 Scroll below for compatibility and fitment.

        Mg 100/150 Buon rapporto qualità/prezzo
        Incubatrice Fiem MG100/150 B. Family Mini Led Advantage + OMAGGIO Umidificatore Automatico (Carica Unica)

        Senza esagerare, si può dire che la MG100/150 B. Family è un prodotto ben progettato, pensato per offrire buone prestazioni con un’interfaccia facile Non è la più economica sul mercato, ma il rapporto tra dotazioni e qualità costruttiva la rende una proposta interessante

        By Temistocle M. the 06/26/2025 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
        Report an abuse
        Qualità
        Qualità

        Qualità prodotti ottima

        By Salvatore C. the 06/04/2025 - This review was helpful 0 - 0 You've already voted
        Report an abuse
        Guida calibrazione e ordini
        🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

        Azienda consigliatissima, puntualità e cortesia nel gestire gli ordini. La guida per la calibrazione molto chiara e utile.

        By Salvatore C. the 06/04/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 0 You've already voted
        Report an abuse
        Buona incubatrice familiare!
        Qualità

        Buona capienza per un utilizzo di un allevatore familiare, per circa 100 uova! Qualità dei materiali molto buona! Mi raccomando seguite bene le istruzioni!!

        By the 01/24/2025 - This review was helpful 0 - 1 You've already voted
        Report an abuse
        ncubatrice per Allevatori Seri
        Incubatrice FIEM MG200/300 Super Rural Lcd Evo Plus Carica Settimanale

        lncubatrice FIEM MG200 e devo dire che sono estremamente soddisfatto del mio acquisto. Questo modello è perfetto per chi, come me, è seriamente interessato all'allevamento di uova di diverse specie. è un investimento sicuro per chi desidera ottenere risultati eccellenti nell'allevamento.

        By Paolo C. the 01/23/2025 - Incubatrice FIEM.. This review was helpful 0 - 0 You've already voted
        Report an abuse
        Giuda interessantissima
        🎁OMAGGIO🎁Controllo e Calibrazione Incubatrice Fiem con Termometro Check-up

        Guida molto utile e da acquistare consigliamo un approfondimento su come effettuare la calibrazione dell'incubatrice.

        By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁Controllo e.. This review was helpful 1 - 1 You've already voted
        Report an abuse
        Giuda indispensabile
        🎁OMAGGIO🎁 L'arte dell'incubazione, guida completa per incubatrici Fiem

        Si tratta di una guida non teorica ma fundata sull'esperienza e pertanto non solo utile ma indispensabile

        By Carlo G. the 01/19/2025 - 🎁OMAGGIO🎁 L'arte.. This review was helpful 0 - 1 You've already voted
        Report an abuse
        Incubatrice Fiem MG 140/200: Qualità e Affidabilità
        Qualità

        Ho acquistato in primavera l’incubatrice Fiem MG 140/200 Rural LCD Evo Plus e sono molto soddisfatto. La costruzione è eccellente e la centralina LCD Evo Plus facilita il monitoraggio.Il servizio di consulenza di Padovan Avicoltura è stato impeccabile, con supporto rapido e competente. Consiglio vivamente questo prodotto e questa azienda.

        By the 09/19/2024 - This review was helpful 0 - 0 You've already voted
        Report an abuse
        Incubatrice Fiem MG100/150 ottimo prodotto e ottima assistenza
        Incubatrice Fiem MG100/150 B. F. Mini Led Advantage + Omaggio Umidificatore Automatico (Carica Settimanale)

        Ho acquistato l'incubatrice Fiem MG100/150 circa sei mesi fa e ne sono estremamente soddisfatto. L'incubatrice offre prestazioni eccellenti e un controllo preciso della temperatura e dell'umidità, garantendo risultati ottimali. Inoltre, il servizio di assistenza clienti è eccezionale, disponibile anche durante i giorni festivi, il che dimostra un vero impegno verso la soddisfazione del cliente. Consiglio vivamente questo prodotto a chiunque cerchi un'incubatrice affidabile e di alta qualità.

        By Antonio F. the 09/15/2024 - Incubatrice Fiem.. This review was helpful 0 - 0 You've already voted
        Report an abuse
        Ottimo omaggio

        Ho ricevuto in omaggio il Kit del Buon Incubatore Cip 40 completo di Termometro Check Up, fogli di carta bulinata e i manuali: guida all’incubazione, agenda giornaliera e controllo e calibrazione. Non potrei essere più soddisfatto!Il kit è davvero utile. L'omaggio del Termometro Check Up è stato un valore aggiunto molto apprezzato. Questo termometro di precisione mi ha permesso di monitorare con estrema accuratezza la temperatura all'interno dell'incubatrice, garantendo così un ambiente ottimale per lo sviluppo delle uova.L'assistenza clienti di Padovan Avicoltura è stata impeccabile: professionale, disponibile e pronta a rispondere a tutte le mie domande.Consiglio vivamente questo kit a chiunque sia appassionato di avicoltura, sia principianti che esperti.

        By the 09/13/2024 - This review was helpful 0 - 0 You've already voted
        Report an abuse

        Questo sito utilizza cookie per garantire una navigazione ottimale.