Original Spare Parts for Fiem Incubators : Mesh Lid for Plastic Hatchery Tray suitable for Fiem MG100/150 Incubators, Fiem MG140/200 Incubators. See usage example in second photo.

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura can you find efficient pre- and post-sales service and spare parts guaranteed over time.

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

New humidification system with immersion cartridge resistance: a gentle and constant humidification system with digital regulation through the evaporation of heated water. Available for multiple models. Automatic humidity with heating resistance. 2020 model. 15 x 30 h 4 tank . The system involves the use of a tank with constant-level water flow equipped with an external tank (see attached photos).

The 30x40 cm Fiem corrugated paper mat is an essential accessory for ensuring proper hatching of eggs in Fiem incubator trays. Made of absorbent and breathable material, it prevents moisture buildup and improves chick adhesion, promoting safe and uniform hatching. Designed for use with Fiem incubators, it ensures hygiene and comfort during the delicate moment of birth. Original Fiem spare parts guaranteed for quality and compatibility.
⚠️ Note: Please check compatibility with your incubator model before purchasing.

Minimum 20 pieces.

Original Fiem Spare Parts from Padovan Avicoltura : Professional Red Partridge Egg Holder for Fiem Astrale Series Incubators MG244 MG316 MG432 MG576 MG720 MG1150 MG2500 MG1300 MG2300 and Victoria Series

Being able to count on a spare parts supply service is essential and makes the difference and adds value to the service provided by PadovanAvicoltura.

Only at Padovan Avicoltura will you find an efficient pre- and post-sales service and guaranteed spare parts in your country.

See other breeders' reviews by clicking HERE BREEDERS' OPINIONS

A customer wrote to me: "The wet-bulb hygrometer always read 100% even when the incubator was dry. I replaced the sock, which was encrusted with limescale and dirt, and now it works perfectly again. My mistake: I was using tap water instead of distilled water."

⚠️ CAUTION - CRITICAL MAINTENANCE: The muslin sock is the most important component for the proper functioning of the wet bulb hygrometer. It MUST be replaced frequently and ALWAYS kept moist with distilled water. A dirty, dry, or mineral-encrusted sock will cause completely incorrect readings.

When to replace: With each new batch of eggs, when the sock appears dirty/yellowish, if there are white scale deposits, when the readings are unstable or stuck at 100%, or if the sock no longer absorbs water well. ALWAYS use distilled or demineralized water to avoid mineral deposits.

What's included: 1 meter of cotton muslin wick, enough for several refills. Cut to the length needed to completely wrap the thermometer bulb.

Basic rules: The sock must always be kept moist, use only distilled water, tighten it well around the bulb, make sure it sits properly in the water tank.

💰 Price: €2.00/meter (VAT excluded, shipping excluded) – FIEM COMO WAREHOUSE – Padovan Avicoltura: original spare parts for precision instruments.

Compatibility: FIEM HNB wet bulb hygrometer and Fiem thermohygrometer

📦 Logistics: Dispatch within 1 business day, delivery within 2-4 days. Warranty: Consumable product.

💡 More info? Read the description below.

FIXED COST SHIPPING

The egg retaining springs for Fiem MG series incubators are original spare parts designed to ensure the correct positioning of eggs in the egg holders, especially when a row is incomplete. If all the eggs are missing from a row, there's a risk that the eggs will tilt or tip over during automatic rotation. The springs solve this problem by firmly locking the eggs into the empty compartments, keeping them upright and stable throughout the incubation period.

Compatible with all Fiem MG series incubators (MG 50, MG 70, MG 100, MG 140, MG 200 and above), these springs are made of strong and durable spring steel , designed to fit perfectly into the supplied tilting baskets. They are easy to install without tools, improve incubation safety, and ensure a higher hatching rate, even when the machine is partially used.

Rely on original Fiem spare parts , available from Padovan Avicoltura , to maintain high quality standards and protect your eggs at every stage.

Semi-automatic humidifier with internal tray with float, external 5-liter rectangular tank (the round one is no longer included) + tube + lid. The new system uses a tray with a constant-level water flow regulated by a float and equipped with an external 5-liter tank. (See attached photos).

Original Fiem Spare Parts: Universal Incubation Basket, 38x50 cm

Suitable for Fiem MG200 incubator.

The quantity of eggs is indicative and varies depending on the size. To secure the eggs upright, we recommend purchasing the appropriate springs (see photo).

See reviews from other breeders by clicking HERE REVIEWS (a serious review service managed directly by Google with verified rated reviews).

 INFO-WHATSAPP

🚀 LAUNCH OFFER – LAST PIECES AVAILABLE FIEM PRO-HATCH | Wi-Fi Remote Control
Only €119 instead of €189 – €70 savings

Why thousands of farmers will no longer be able to do without it

• 📱 Full control from your mobile phone – Temperature, humidity, incubation days, heating/cooling/humidifier status
• 🚨 Instant notifications – Blackout, temperature out of range, low/high humidity – always arrive on time
• ⏰ Dual time programming – Set 4 different time bands (e.g. 37.5°C/55% during the day, 37.2°C/65% at night for ducks)
• 🏠 Manage multiple incubators – One app for your entire fleet of machines
• 🛠️ Ridiculous setup – just a few minutes: insert the P-MOD, connect to Wi-Fi with the Renesas app, scan the QR code... done.

Compatibility

✅ Plug & Play on all new FIEM incubators with EVO PLUS control unit (from April 2025 onwards)

Launch offer – Valid until stocks last (30 pieces)

MORE INFO? Read the description below

📘 Discover the Art of Incubation: The Complete Guide to FIEM Incubators

Do you want to turn your passion for poultry farming into real professional expertise?
With the exclusive guide "The art of incubation – Complete guide for Fiem incubators" , offered free of charge by Padovan Avicoltura , you finally have the right tool to make the leap in quality.

This guide isn't just a manual: it's the fruit of over 45 years of experience in the industry. A distillation of technical knowledge, practical advice, and professional secrets , designed for those who want to achieve tangible results in egg hatching.

🔍 What will you find in the guide?

Theoretical insights to understand each phase of incubation

Strategies to improve hatching rates

Practical solutions to common problems

Field-tested advice

📈 Who is it for? Anyone who buys a Fiem incubator and wants to use it consciously, effectively, and professionally .

🎁 How to get it? Free upon request for anyone who purchases a FIEM incubator.
Free license, reserved for Padovan Avicoltura customers (after accepting the privacy policy)

Don't miss your chance to become a true expert: request your copy now!
Knowledge is the only accessory that really makes a difference.

The FIEM 85–110°F precision thermometer, made in Germany, is designed to provide a clearer, simpler, and more immediate temperature reading in incubators. Ideal for everyday use in both professional and amateur settings, it guarantees accuracy and ease of use. Compatible with all FIEM incubators with analog readout, it is a reliable and long-lasting accessory.

✔ Simplified and intuitive temperature reading
✔ Ideal incubation range: 85–110°F
✔ Made in Germany: highest quality and readability
✔ Original Fiem spare part, ready to use

By purchasing this item, you choose reliability, precision, and practicality, improving environmental control in your incubators.

ATTENTION: Please check carefully that the spare part matches the image.

Original Spare Parts for Fiem Incubators : 30x40cm plastic hatching tray suitable for Fiem MG 100/150 Incubator, Fiem MG140/200 Incubator, MG 200/300 (S) . For example use, see second photo. Mesh lid available for purchase separately.

Only at PadovanAvicoltura can you find an efficient spare parts service guaranteed over time to keep your incubator in top working order, as well as pre- and post-sales assistance.

see also art. cod. 38 and cod. 56

See reviews from other breeders by clicking HERE BREEDER REVIEWS (a serious review service managed directly by Google with verified nominal reviews).

Trust Padovan Avicoltura: only Made in Italy incubators and original spare parts.